6000 ROMs

From OESF

Contents 1 What is available? 1.1 Sharp ROM 1.2 Guylhem ROM 1.3 OpenEmbedded project 1.4 pdaX ROM 1.5 Qtopia ROM 2 How-to flash a new ROM 3 How-to restore the original SL-6000 ROM 3.1 Troubleshooting the lights

What is available?

Sharp ROM

• (see below Restore Sharp Stock ROM) SharpUSA product page
• fast kernel instructions: ffpe (fast floating point emulation) or no-ffpe version
• fast kernel (beta) Discussion and Download

Guylhem ROM

• (beta) Guylhem Rom
• uses the fast kernel by default
• Qtopia or no GUI images

OpenEmbedded project

• OpenZaurus site 6000L installation instructions and downloads
• GPE or OPIE images

pdaX ROM

• pdaXrom site 6000L installation instructions and downloads
• How to install pdaXrom
• (beta) Discussion

Qtopia ROM

• (beta) Qtopia site 6000L installation instructions and downloads
• available as-is

How-to flash a new ROM

1. Prepare a compatible memory card. It can be an SD type or CF type memory card, but it must be formated as FAT16.
2. Copy updater.sh, consolescroll, zImage, initrd.bin, on to the prepared memory card. You may choose to use only a zImage file or a initrd.bin if you don't want to change one or the other.
3. Before updating make sure that you backup any data that you wish to save.
4. Push the reset button on the rear of the handheld using the stylus.
5. Connect the A/C adapter to the handheld. The orange charge light should now be lit.
6. Enter the maintenance menu. Holding down the Okay button, push the power button.
7. Select item #4 to update.
8. Select the type of card you prepared, either SD or CF.
9. The handheld will reboot into a seperate hidden kernel used for reflashing the device, execute the updater.sh script, and reflash it.
10. When everything is finished, you will be instructed to reset the device.

How-to restore the original SL-6000 ROM

This is for the SL-6000L only. You can also find a backup ROM for the 6000W here http://www.externe.net/zaurus/flash/.

1. Download http://www.externe.net/zaurus/flash/updates/SL6000L-US-1.12.zip
2. Extract files onto a SD or CF card formatted as FAT16
3. Connect the A/C adapter to the handheld. The orange charge light should now be lit.
4. Hold down the 'Q' and 'T' keys and while holding, push down the reset button with your stylus.
5. When the unit begins to flash the green mail light will turn on. This light will stay on until it has finished.

Troubleshooting the lights

• If the mail light doesn't turn on, then the handheld could not find any files to flash.
• If the mail light starts to blink it indicates an error has occured. You may have corrupt files on your memory card.