C1000 General Info
From OESF
(Difference between revisions)
m |
m |
||
Line 10: |
Line 10: | ||
* 64MB | * 64MB | ||
* Card Slots | * Card Slots | ||
| - | * SD card slot (possibly SDIO) | + | * SD card slot (possibly SDIO if someone develops a driver) |
* CF card slot | * CF card slot | ||
* internal CF slot circuitry is not populated, so turning a C1000 into a C3000 would require a bunch of components and a bit of soldering. | * internal CF slot circuitry is not populated, so turning a C1000 into a C3000 would require a bunch of components and a bit of soldering. | ||
* Communications & I/O | * Communications & I/O | ||
| - | * | + | * USB 2.0 but 1.1 transfer speed - slave and host (the latter needs a special cable - one sold by iRiver for PMP models works) |
* Display | * Display | ||
* 640x480 chip on glass TFT display | * 640x480 chip on glass TFT display | ||
* Keyboard | * Keyboard | ||
| - | * | + | * Japanese keyboard layout and keys |
* Battery & Power | * Battery & Power | ||
* 1800 mAH, external charger | * 1800 mAH, external charger | ||
* warning, no reverse polarity protection so be VERY careful if using a non-standard power supply | * warning, no reverse polarity protection so be VERY careful if using a non-standard power supply | ||
Revision as of 00:19, 21 February 2006
Overview of specifications for the Sharp SL-C1000
- CPU
* Intel XScale PXA270 416MHz
- ROM
* 128MB flash rom (same circuit board as C3000 but fitted with more memory). Partitioning :
* 64 MB : /
* 64 MB : /home
- RAM
* 64MB
- Card Slots
* SD card slot (possibly SDIO if someone develops a driver) * CF card slot * internal CF slot circuitry is not populated, so turning a C1000 into a C3000 would require a bunch of components and a bit of soldering.
- Communications & I/O
* USB 2.0 but 1.1 transfer speed - slave and host (the latter needs a special cable - one sold by iRiver for PMP models works)
- Display
* 640x480 chip on glass TFT display
- Keyboard
* Japanese keyboard layout and keys
- Battery & Power
* 1800 mAH, external charger * warning, no reverse polarity protection so be VERY careful if using a non-standard power supply
