C3000 General Info
From OESF
(Difference between revisions)
m |
|||
(46 intermediate revisions not shown.) | |||
Line 1: |
Line 1: | ||
| - | + | Overview of specifications for the Sharp SL-C3000 | |
| - | + | * CPU | |
| + | ** Intel XScale PXA270 416 MHz | ||
| + | * ROM | ||
| + | ** 16MB Boot Flash in NAND | ||
| + | ** Unlike 860 it relies on the hard drive for mass non-volatile storage | ||
| + | * RAM | ||
| + | ** 64 MB | ||
| + | * Hard Disk | ||
| + | ** Internal CF-like socket fitted with 4 GB Hitachi microdrive | ||
| + | * Card Slots | ||
| + | ** SD card slot (SDIO) | ||
| + | ** CF card slot | ||
| + | * Communications | ||
| + | ** USB OTG 1.1 - slave and host (the latter needs USB Mini-A host cable) | ||
| + | ** IOPORT - the same connector as older models, but no USB, pins could provide less current, first series may have only JTAG there | ||
| + | * Audio | ||
| + | ** Wolfson WM8750 codec (96 kHz, 24 bits) | ||
| + | ** 5 pin 3.5mm jack (4 pins + insert detection) | ||
| + | ** stereo out, semi-differential mono in | ||
| + | ** resistance meter (for remote control) | ||
| - | + | [[Category: Model Specs]] | |
| - | + | ||
Current revision
Overview of specifications for the Sharp SL-C3000
- CPU
- Intel XScale PXA270 416 MHz
- ROM
- 16MB Boot Flash in NAND
- Unlike 860 it relies on the hard drive for mass non-volatile storage
- RAM
- 64 MB
- Hard Disk
- Internal CF-like socket fitted with 4 GB Hitachi microdrive
- Card Slots
- SD card slot (SDIO)
- CF card slot
- Communications
- USB OTG 1.1 - slave and host (the latter needs USB Mini-A host cable)
- IOPORT - the same connector as older models, but no USB, pins could provide less current, first series may have only JTAG there
- Audio
- Wolfson WM8750 codec (96 kHz, 24 bits)
- 5 pin 3.5mm jack (4 pins + insert detection)
- stereo out, semi-differential mono in
- resistance meter (for remote control)

