Drivers - Revision history

Koan: Moving anecdotal comment to discussion

Koan — Fri, 18 Feb 2011 09:39:41 GMT

Moving anecdotal comment to discussion

←Older revision		Revision as of 09:39, 18 February 2011
Line 14:		Line 14:
	The driver is in an ipk file so installation is performed by simply tapping the icon.		The driver is in an ipk file so installation is performed by simply tapping the icon.

-	~~..........I am running~~ Cacko ~~"Heavy" on an sl-c1000. I uninstalled the 1+GB~~ SD driver I had already installed, then rebooted, installed the SDHC driver, and rebooted again. When the system was up and running again I inserted a 4GB SDHC card and the Zaurus froze, needing a reboot to get it working properly again. That 4GB SDHC card was the ~~only SDHC card I had to try~~.	+	====Cacko ROM====
		+	The extended SD driver module must be removed before installing the bucchi software.

	==Enhanced Audio Driver==		==Enhanced Audio Driver==
	Andre Beckedorf (evilJazz on OESF) has made an [http://katastrophos.net/andre/blog/2007/08/09/enhanced-mixer-for-zaurus-sl-c1000c3x00-available/ enhanced audio driver] for the Wolfson WM8750 that is on the Zaurus SL-C1000 and SL-C3X00 models.		Andre Beckedorf (evilJazz on OESF) has made an [http://katastrophos.net/andre/blog/2007/08/09/enhanced-mixer-for-zaurus-sl-c1000c3x00-available/ enhanced audio driver] for the Wolfson WM8750 that is on the Zaurus SL-C1000 and SL-C3X00 models.
	You need to install a special kernel in order to use it. ([http://www.oesf.org/forum/index.php?showtopic=23984&st=0 OESF Discussion])		You need to install a special kernel in order to use it. ([http://www.oesf.org/forum/index.php?showtopic=23984&st=0 OESF Discussion])

24.60.247.128: /* SDHC Driver */

24.60.247.128 — Sun, 05 Sep 2010 14:41:57 GMT

SDHC Driver

←Older revision		Revision as of 14:41, 5 September 2010
Line 13:		Line 13:

	The driver is in an ipk file so installation is performed by simply tapping the icon.		The driver is in an ipk file so installation is performed by simply tapping the icon.
		+
		+	..........I am running Cacko "Heavy" on an sl-c1000. I uninstalled the 1+GB SD driver I had already installed, then rebooted, installed the SDHC driver, and rebooted again. When the system was up and running again I inserted a 4GB SDHC card and the Zaurus froze, needing a reboot to get it working properly again. That 4GB SDHC card was the only SDHC card I had to try.

	==Enhanced Audio Driver==		==Enhanced Audio Driver==
	Andre Beckedorf (evilJazz on OESF) has made an [http://katastrophos.net/andre/blog/2007/08/09/enhanced-mixer-for-zaurus-sl-c1000c3x00-available/ enhanced audio driver] for the Wolfson WM8750 that is on the Zaurus SL-C1000 and SL-C3X00 models.		Andre Beckedorf (evilJazz on OESF) has made an [http://katastrophos.net/andre/blog/2007/08/09/enhanced-mixer-for-zaurus-sl-c1000c3x00-available/ enhanced audio driver] for the Wolfson WM8750 that is on the Zaurus SL-C1000 and SL-C3X00 models.
	You need to install a special kernel in order to use it. ([http://www.oesf.org/forum/index.php?showtopic=23984&st=0 OESF Discussion])		You need to install a special kernel in order to use it. ([http://www.oesf.org/forum/index.php?showtopic=23984&st=0 OESF Discussion])

Koan: /* SDHC Driver */

Koan — Sat, 28 Aug 2010 13:09:17 GMT

SDHC Driver

←Older revision		Revision as of 13:09, 28 August 2010
Line 12:		Line 12:
	bucchi has developed a [http://petit-noise.net/download/sdhc-driver SDHC driver] to use cards of upto 32GB for all Zaurus. It patches the standard Sharp driver so the ROM must be reverted to the original state for installation to be successful.		bucchi has developed a [http://petit-noise.net/download/sdhc-driver SDHC driver] to use cards of upto 32GB for all Zaurus. It patches the standard Sharp driver so the ROM must be reverted to the original state for installation to be successful.

-	The driver is in an ipk file to installation is performed by simply tapping the icon.	+	The driver is in an ipk file so installation is performed by simply tapping the icon.

	==Enhanced Audio Driver==		==Enhanced Audio Driver==
	Andre Beckedorf (evilJazz on OESF) has made an [http://katastrophos.net/andre/blog/2007/08/09/enhanced-mixer-for-zaurus-sl-c1000c3x00-available/ enhanced audio driver] for the Wolfson WM8750 that is on the Zaurus SL-C1000 and SL-C3X00 models.		Andre Beckedorf (evilJazz on OESF) has made an [http://katastrophos.net/andre/blog/2007/08/09/enhanced-mixer-for-zaurus-sl-c1000c3x00-available/ enhanced audio driver] for the Wolfson WM8750 that is on the Zaurus SL-C1000 and SL-C3X00 models.
	You need to install a special kernel in order to use it. ([http://www.oesf.org/forum/index.php?showtopic=23984&st=0 OESF Discussion])		You need to install a special kernel in order to use it. ([http://www.oesf.org/forum/index.php?showtopic=23984&st=0 OESF Discussion])

Koan: /* Using SDHC with Sharp/Cacko ROMs */

Koan — Sat, 28 Aug 2010 13:07:16 GMT

Using SDHC with Sharp/Cacko ROMs

←Older revision		Revision as of 13:07, 28 August 2010
Line 5:		Line 5:
	* The original Sharp ROM can only mount a 1GB SD card and will not mount SDHC; the Zaurus SL-C3200 came with a driver that could handle up to 4GB SD cards - this driver can also be used with the 3000 and 3100.		* The original Sharp ROM can only mount a 1GB SD card and will not mount SDHC; the Zaurus SL-C3200 came with a driver that could handle up to 4GB SD cards - this driver can also be used with the 3000 and 3100.
	* There is a sdmmc module for the Cacko ROM that will allow larger SD cards to be used, but not SDHC.		* There is a sdmmc module for the Cacko ROM that will allow larger SD cards to be used, but not SDHC.
-	* C-guys developed a SDIO driver that allowed 2GB SD cards to be used with the Sharp ROM. The scripts to automatically mount the device required some editing and even then ~~cards~~ needed. [http://www.oesf.org/forum/index.php?showtopic=17208 OESF Discussion]	+	* C-guys developed a SDIO driver that allowed 2GB SD cards to be used with the Sharp ROM. The scripts to automatically mount the device required some editing and even then some manual intervention was needed. [http://www.oesf.org/forum/index.php?showtopic=17208 OESF Discussion]

	The Sharp driver can be found on the ROM at <tt>/lib/modules.rom/2.4.18-rmk7-pxa3-embedix/kernel/drivers/block/sharp_mmcsd_m.o</tt> (depending on which ROM you are using).		The Sharp driver can be found on the ROM at <tt>/lib/modules.rom/2.4.18-rmk7-pxa3-embedix/kernel/drivers/block/sharp_mmcsd_m.o</tt> (depending on which ROM you are using).

Koan: /* Using SDHC with Sharp/Cacko ROMs */

Koan — Sat, 28 Aug 2010 12:54:20 GMT

Using SDHC with Sharp/Cacko ROMs

←Older revision		Revision as of 12:54, 28 August 2010
Line 1:		Line 1:
-	==Using SDHC with Sharp/Cacko ROMs==	+	==SDHC==
		+
		+	===Using SDHC with Sharp/Cacko ROMs===

	* The original Sharp ROM can only mount a 1GB SD card and will not mount SDHC; the Zaurus SL-C3200 came with a driver that could handle up to 4GB SD cards - this driver can also be used with the 3000 and 3100.		* The original Sharp ROM can only mount a 1GB SD card and will not mount SDHC; the Zaurus SL-C3200 came with a driver that could handle up to 4GB SD cards - this driver can also be used with the 3000 and 3100.
Line 8:		Line 10:

	===SDHC Driver===		===SDHC Driver===
-	bucchi has developed a [http://petit-noise.net/download/sdhc-driver SDHC driver] to use cards of upto 32GB for all Zaurus. It patches the standard Sharp driver so the ROM must be reverted to the original state for ~~the install~~ to be successful.	+	bucchi has developed a [http://petit-noise.net/download/sdhc-driver SDHC driver] to use cards of upto 32GB for all Zaurus. It patches the standard Sharp driver so the ROM must be reverted to the original state for installation to be successful.

	The driver is in an ipk file to installation is performed by simply tapping the icon.		The driver is in an ipk file to installation is performed by simply tapping the icon.

Koan: Added audio driver details

Koan — Sat, 28 Aug 2010 12:51:00 GMT

Added audio driver details

←Older revision		Revision as of 12:51, 28 August 2010
Line 11:		Line 11:

	The driver is in an ipk file to installation is performed by simply tapping the icon.		The driver is in an ipk file to installation is performed by simply tapping the icon.
		+
		+	==Enhanced Audio Driver==
		+	Andre Beckedorf (evilJazz on OESF) has made an [http://katastrophos.net/andre/blog/2007/08/09/enhanced-mixer-for-zaurus-sl-c1000c3x00-available/ enhanced audio driver] for the Wolfson WM8750 that is on the Zaurus SL-C1000 and SL-C3X00 models.
		+	You need to install a special kernel in order to use it. ([http://www.oesf.org/forum/index.php?showtopic=23984&st=0 OESF Discussion])

Koan: /* SDHC */

Koan — Fri, 27 Aug 2010 20:37:27 GMT

SDHC

←Older revision		Revision as of 20:37, 27 August 2010
Line 7:		Line 7:
	The Sharp driver can be found on the ROM at <tt>/lib/modules.rom/2.4.18-rmk7-pxa3-embedix/kernel/drivers/block/sharp_mmcsd_m.o</tt> (depending on which ROM you are using).		The Sharp driver can be found on the ROM at <tt>/lib/modules.rom/2.4.18-rmk7-pxa3-embedix/kernel/drivers/block/sharp_mmcsd_m.o</tt> (depending on which ROM you are using).

-	===SDHC===	+	===SDHC Driver===
-	bucchi has developed a [http://petit-noise.net/download/sdhc-driver SDHC] driver to use cards of upto 32GB for all Zaurus. It patches the standard Sharp driver so the ROM must be reverted to the original state for the install to be successful.	+	bucchi has developed a [http://petit-noise.net/download/sdhc-driver SDHC driver] to use cards of upto 32GB for all Zaurus. It patches the standard Sharp driver so the ROM must be reverted to the original state for the install to be successful.

	The driver is in an ipk file to installation is performed by simply tapping the icon.		The driver is in an ipk file to installation is performed by simply tapping the icon.

Koan: /* Using SDHC with Sharp/Cacko ROMs */

Koan — Fri, 27 Aug 2010 20:36:17 GMT

Using SDHC with Sharp/Cacko ROMs

←Older revision		Revision as of 20:36, 27 August 2010
Line 1:		Line 1:
	==Using SDHC with Sharp/Cacko ROMs==		==Using SDHC with Sharp/Cacko ROMs==

-	* The ~~standard~~ Sharp ROM can only mount a 1GB SD card and will not mount SDHC.	+	* The original Sharp ROM can only mount a 1GB SD card and will not mount SDHC; the Zaurus SL-C3200 came with a driver that could handle up to 4GB SD cards - this driver can also be used with the 3000 and 3100.
	* There is a sdmmc module for the Cacko ROM that will allow larger SD cards to be used, but not SDHC.		* There is a sdmmc module for the Cacko ROM that will allow larger SD cards to be used, but not SDHC.
	* C-guys developed a SDIO driver that allowed 2GB SD cards to be used with the Sharp ROM. The scripts to automatically mount the device required some editing and even then cards needed. [http://www.oesf.org/forum/index.php?showtopic=17208 OESF Discussion]		* C-guys developed a SDIO driver that allowed 2GB SD cards to be used with the Sharp ROM. The scripts to automatically mount the device required some editing and even then cards needed. [http://www.oesf.org/forum/index.php?showtopic=17208 OESF Discussion]

81.97.128.1: New page on drivers

81.97.128.1 — Fri, 27 Aug 2010 20:28:10 GMT

New page on drivers

New page

==Using SDHC with Sharp/Cacko ROMs==

* The standard Sharp ROM can only mount a 1GB SD card and will not mount SDHC.
* There is a sdmmc module for the Cacko ROM that will allow larger SD cards to be used, but not SDHC.
* C-guys developed a SDIO driver that allowed 2GB SD cards to be used with the Sharp ROM. The scripts to automatically mount the device required some editing and even then cards needed. [http://www.oesf.org/forum/index.php?showtopic=17208 OESF Discussion]

The Sharp driver can be found on the ROM at <tt>/lib/modules.rom/2.4.18-rmk7-pxa3-embedix/kernel/drivers/block/sharp_mmcsd_m.o</tt> (depending on which ROM you are using).

===SDHC===
bucchi has developed a [http://petit-noise.net/download/sdhc-driver SDHC] driver to use cards of upto 32GB for all Zaurus. It patches the standard Sharp driver so the ROM must be reverted to the original state for the install to be successful.

The driver is in an ipk file to installation is performed by simply tapping the icon.