Wireless

From OESF

Howto sync to the Zaurus wirelessly

If you don't already have a wireless network connection set up see the wireless howto.

Note that you must use ROM's 2.37 or before at this time. 2.38 and above don't work with wireless syncing.

1. Enter the network and sync application in the Settings tab.
2. Under the first tab (current) you will see an IP address.
3. Enter the IP address on the Zaurus screen into the Communications Options section of the Intellisync software. Make sure you enter it under the Serial IP address.
4. Close out the Communications Options on your PC.
5. Start the sync via your systems tray on your PC.