Author Topic: New 5600 and doom?  (Read 10936 times)

xamindar

  • Hero Member
  • *****
  • Posts: 803
    • View Profile
    • http://www.radnimax.com
New 5600 and doom?
« Reply #15 on: May 11, 2004, 02:25:08 am »
LOL, people don\'t know how to play doom any more.  Am I really that old?  And, you can not jump in doom, look for a switch that will allow you to get to things.
SL-C3100 happily Dualbooting Japanese Rom 1.02 and Debian Eabi
Replaced internal CF with 8gb seagate cf hard drive
Ambicom CF GPS
CyberPower battery powered USB hub
D-link DCF-650W (MAN THIS THING IS HUGE!!)

wizzard

  • Full Member
  • ***
  • Posts: 154
    • View Profile
    • http://
New 5600 and doom?
« Reply #16 on: May 11, 2004, 07:10:04 am »
Of course you are not old. But it is true, I have played very little Doom in my PC. At the start of the game, if I remember correctly, the door used to open if you went and stood in front of it (maybe you had to press \'space\'). In Freedoom, however, I can\'t see any door at all, leave alone open it. Could someone please tell me how to get out of the room?
Thanks
SL 5600 PXA250 with Watapon 1.6
Kingston 256MB SD/ Canon 32MB CF/ Pretec WiFi 802.11b

(Still) Looking for a suitable case

TonyOlsen

  • Hero Member
  • *****
  • Posts: 554
    • View Profile
    • http://www.userdimensions.com/Tony/Resume.html
New 5600 and doom?
« Reply #17 on: May 11, 2004, 09:54:07 am »
Press the BS/Del button.  That\'s the button to \"use/click\" stuff.  You an also change the keyboard mapping by pressing \"Fn\" (I think).

...but I still don\'t know how to jump.  Can you jump in Doom?
Tony Olsen
Ferris@Myself.Com
Resume
Zaurus SL-C860 QTopia
2 GB Static CF
1 GB MMC (although it isn't working yet)
My Quest: To get an x86 emulator working on my Zaurus and to have my Zaurus replace my laptop as my MAIN computer
Publically available Videos for the default Zaurus SL-C860 video player

TonyOlsen

  • Hero Member
  • *****
  • Posts: 554
    • View Profile
    • http://www.userdimensions.com/Tony/Resume.html
New 5600 and doom?
« Reply #18 on: May 11, 2004, 09:55:18 am »
Oh... I forgot to mention... go to the door (so you\'re right up next to it), then press BS/Del.  It took me a while to figure that out too...
Tony Olsen
Ferris@Myself.Com
Resume
Zaurus SL-C860 QTopia
2 GB Static CF
1 GB MMC (although it isn't working yet)
My Quest: To get an x86 emulator working on my Zaurus and to have my Zaurus replace my laptop as my MAIN computer
Publically available Videos for the default Zaurus SL-C860 video player

wizzard

  • Full Member
  • ***
  • Posts: 154
    • View Profile
    • http://
New 5600 and doom?
« Reply #19 on: May 11, 2004, 11:11:30 am »
Thanks Mr Olsen
But I still can\'t see the door!
I start in an empty room and see an EXIT sign in front. Below that on the wall there are rows of buttons. I go up to the buttons and press BS. Nothing happens. Behind me is a recessed wall eith a diagram. Where is the door?

Thanks
SL 5600 PXA250 with Watapon 1.6
Kingston 256MB SD/ Canon 32MB CF/ Pretec WiFi 802.11b

(Still) Looking for a suitable case

TonyOlsen

  • Hero Member
  • *****
  • Posts: 554
    • View Profile
    • http://www.userdimensions.com/Tony/Resume.html
New 5600 and doom?
« Reply #20 on: May 11, 2004, 11:16:07 am »
The door is on the side with the Exit sign.  There should be 2 buttons: a red one (which is lit) and a green one (which is darker / not lit).  You have to be touching the wall at that point for the BS to work.

It is possible that your keyboard is mapped differently.  Did you try pressing your FN button to see if the kayboard mapping appears?
Tony Olsen
Ferris@Myself.Com
Resume
Zaurus SL-C860 QTopia
2 GB Static CF
1 GB MMC (although it isn't working yet)
My Quest: To get an x86 emulator working on my Zaurus and to have my Zaurus replace my laptop as my MAIN computer
Publically available Videos for the default Zaurus SL-C860 video player

wizzard

  • Full Member
  • ***
  • Posts: 154
    • View Profile
    • http://
New 5600 and doom?
« Reply #21 on: May 11, 2004, 11:22:20 am »
Thanks for the info. I\'ll try it & let you know if it worked.
SL 5600 PXA250 with Watapon 1.6
Kingston 256MB SD/ Canon 32MB CF/ Pretec WiFi 802.11b

(Still) Looking for a suitable case

wizzard

  • Full Member
  • ***
  • Posts: 154
    • View Profile
    • http://
New 5600 and doom?
« Reply #22 on: May 11, 2004, 11:33:10 am »
It worked. Thanks man.
You rock
SL 5600 PXA250 with Watapon 1.6
Kingston 256MB SD/ Canon 32MB CF/ Pretec WiFi 802.11b

(Still) Looking for a suitable case

cmisip

  • Sr. Member
  • ****
  • Posts: 256
    • View Profile
    • http://home.mchsi.com/~cmisip/index.htm
New 5600 and doom?
« Reply #23 on: June 05, 2004, 10:42:42 am »
I cant find the door you guys are talking about.  There is a door with a dead marine in front.  Cant open that.  There is another white door beside the pool with the dead monster.  How do I open these doors?  I am using the shareware version.

Thanks.
Zaurus 5600
Zynergy Rootfs 1.1
Custom zImage

How Do You Do That in Linux

cmisip

  • Sr. Member
  • ****
  • Posts: 256
    • View Profile
    • http://home.mchsi.com/~cmisip/index.htm
New 5600 and doom?
« Reply #24 on: June 05, 2004, 10:49:24 am »
I dont seem to have midi music working either.  Is it included in Prboom?
Zaurus 5600
Zynergy Rootfs 1.1
Custom zImage

How Do You Do That in Linux

g0dless

  • Newbie
  • *
  • Posts: 13
    • View Profile
New 5600 and doom?
« Reply #25 on: June 05, 2004, 10:59:22 am »
ToneOlsen : doom doesn\'t have a jump key

TonyOlsen

  • Hero Member
  • *****
  • Posts: 554
    • View Profile
    • http://www.userdimensions.com/Tony/Resume.html
New 5600 and doom?
« Reply #26 on: June 05, 2004, 05:58:02 pm »
Quote
ToneOlsen : doom doesn\'t have a jump key


Thanks!    I\'m glad someone remembered to answer that question

...so, how do you get to the armor in the room with the 4 square pillor with the fire balls throwing snake-man creatures?

Quote
I cant find the door you guys are talking about. There is a door with a dead marine in front. Cant open that. There is another white door beside the pool with the dead monster. How do I open these doors? I am using the shareware version.  


Different doors require different keys.  A door with a partcular color around it needs a key of the same color.  It\'s a big treasure hunt to find the combinations of locations to find the various keys to progress to various doors in the game.  It isn\'t much like the new Quake games where thinking isn\'t needed as much as a fast firing button

Quote
I dont seem to have midi music working either. Is it included in Prboom?


I don\'t have music on mine...
Tony Olsen
Ferris@Myself.Com
Resume
Zaurus SL-C860 QTopia
2 GB Static CF
1 GB MMC (although it isn't working yet)
My Quest: To get an x86 emulator working on my Zaurus and to have my Zaurus replace my laptop as my MAIN computer
Publically available Videos for the default Zaurus SL-C860 video player

TonyOlsen

  • Hero Member
  • *****
  • Posts: 554
    • View Profile
    • http://www.userdimensions.com/Tony/Resume.html
New 5600 and doom?
« Reply #27 on: June 05, 2004, 06:01:00 pm »
Hold on a sec... are you refering to the 3rd level?  (The 1st is a simple door... no creatures.  The 2nd floor has lots of creatures and secret doors.  And the 3rd level is some doors... no secrets or creatures (or maybe only a few creatures)... but no colored doors or keys...)

I can\'t find the path beyond the 3rd level either...
Tony Olsen
Ferris@Myself.Com
Resume
Zaurus SL-C860 QTopia
2 GB Static CF
1 GB MMC (although it isn't working yet)
My Quest: To get an x86 emulator working on my Zaurus and to have my Zaurus replace my laptop as my MAIN computer
Publically available Videos for the default Zaurus SL-C860 video player

cmisip

  • Sr. Member
  • ****
  • Posts: 256
    • View Profile
    • http://home.mchsi.com/~cmisip/index.htm
New 5600 and doom?
« Reply #28 on: June 05, 2004, 07:50:37 pm »
I am just on the first level, as soon as I start the game.  Cant get past the doors.  There is no colored key.
Zaurus 5600
Zynergy Rootfs 1.1
Custom zImage

How Do You Do That in Linux

cmisip

  • Sr. Member
  • ****
  • Posts: 256
    • View Profile
    • http://home.mchsi.com/~cmisip/index.htm
New 5600 and doom?
« Reply #29 on: June 05, 2004, 09:04:31 pm »
For anyone interested, I got the midi working with prboom.

1. Download the timidity midi patch from http://www.linet.gr.jp/~tamuki/timidity/ea...required.tar.gz
2. Install it on your SD card since it takes a lot of space. I put it in /mnt/card/Documents/timidity
3. Edit the timidity.cfg so it points to current dir
4. Create a symlink from usr/local/lib/timidity
  ln -sf ln -sf /mnt/card/Documents/timidity /usr/local/lib/timidity

Now...If only I could get through the door.
Zaurus 5600
Zynergy Rootfs 1.1
Custom zImage

How Do You Do That in Linux