Author Topic: Compilation Of Wifi Cf For 3k  (Read 13160 times)

NTalent

  • Newbie
  • *
  • Posts: 6
    • View Profile
Compilation Of Wifi Cf For 3k
« Reply #15 on: February 06, 2005, 05:45:10 am »
Sorry for previous piece. Strange, but I can't normally post from Z.

Can somebody help me with older Socket Wifi? I believe it has the same architecture as Symbol. I reproduced Zeeuser's recomendations  and ran through Wizard's detection procedure. The card was recognized as Lan card and indicator started to blink. Though I received standard Lan dialogue with limited fields to fill in - TCP/IP;DNS;Proxy.

Is there any way to show ESS-ID and ad-hoc network type as I use connection between 2 computers?

Thanks in advance, NTalent.

barbjfox2000

  • Newbie
  • *
  • Posts: 19
    • View Profile
Compilation Of Wifi Cf For 3k
« Reply #16 on: February 08, 2005, 11:51:48 am »
I've got a D-Link Air 660W and am getting very random behaviors.  I have never been able to maintain a connection, but I've managed to activate it for a few seconds a few times.

#cardctl ident --> Identifies it properly

#iwconfig --> can often see it and specify the access point fine

Sometimes I even get "Network Connection Established".  When I actually try to "do" anything (browse, ping, etc.) I almost immediately get "TCP Write Error" and then I'm hosed. The card loses its connection to the access point and won't re-establish.

Any idea of what I need to change?

Another important note...quite often when this card is installed, the screen starts fading and in a matter of seconds turns completely white.  It's completely hung...not even the power button works.  If I pull the card out and in a few times, it'll usually clear, but once I had to do a reset.

- Barb

asche

  • Newbie
  • *
  • Posts: 3
    • View Profile
Compilation Of Wifi Cf For 3k
« Reply #17 on: February 10, 2005, 11:30:04 am »
Hi,

I have a D-Link(Air 660W) card to. It works very well including 128 WEP encryption.
The only problem i have is: when i connected to WLAN and do a suspend and then a wake
up the 3k the connection can't be established again. Removing und re-inserting the card does
not help, only rebooting the 3k helps.

When i disconnect from WLAN before suspend the 3k and then wake up everything
works fine.

Greetings from Germany,

asche

socalluckdragon

  • Newbie
  • *
  • Posts: 10
    • View Profile
Compilation Of Wifi Cf For 3k
« Reply #18 on: February 11, 2005, 06:56:13 pm »
I have a potentially stupid question...

Does anyone know of a CF wireless card that does WPA?

I could have sworn that I've seen a 802.11b card somewhere that used WPA (not CF), but I'm not sure if the CFII bus can handle it, so not being entirely familar with the hw standard, it may not be possible.

Anyone?
« Last Edit: February 11, 2005, 06:56:43 pm by socalluckdragon »

socalluckdragon

  • Newbie
  • *
  • Posts: 10
    • View Profile
Compilation Of Wifi Cf For 3k
« Reply #19 on: February 11, 2005, 07:32:15 pm »
Quote
I have a potentially stupid question...

Does anyone know of a CF wireless card that does WPA?

I could have sworn that I've seen a 802.11b card somewhere that used WPA (not CF), but I'm not sure if the CFII bus can handle it, so not being entirely familar with the hw standard, it may not be possible.

Anyone?
[div align=\"right\"][{POST_SNAPBACK}][/a][/div]

Ok...googled my own question

[a href=\"http://www.wi-fi.org/OpenSection/certified_products.asp?TID=2]http://www.wi-fi.org/OpenSection/certified...ducts.asp?TID=2[/url]

filter products by Compact Flash
check 802.11b
check All WPA
search

Still didn't see any that people had reported previous success with though. :/

socalluckdragon

  • Newbie
  • *
  • Posts: 10
    • View Profile
Compilation Of Wifi Cf For 3k
« Reply #20 on: February 12, 2005, 04:08:44 pm »
Anyone know if this CF wireless card works on the Z 3k?
Company:         Planex Communications Inc.
Product:       GW-CF11X

maslovsky

  • Hero Member
  • *****
  • Posts: 1426
    • View Profile
    • http://my-zaurus.narod.ru
Compilation Of Wifi Cf For 3k
« Reply #21 on: February 17, 2005, 07:07:44 am »
Quote
I have a potentially stupid question...

Does anyone know of a CF wireless card that does WPA?

I could have sworn that I've seen a 802.11b card somewhere that used WPA (not CF), but I'm not sure if the CFII bus can handle it, so not being entirely familar with the hw standard, it may not be possible.

Anyone?
[div align=\"right\"][a href=\"index.php?act=findpost&pid=66676\"][{POST_SNAPBACK}][/a][/div]

WPA is supported by recent hostap drivers, so any WiFi card supported by hostap also supports WPA.

euroclie

  • Full Member
  • ***
  • Posts: 205
    • View Profile
    • http://
Compilation Of Wifi Cf For 3k
« Reply #22 on: February 17, 2005, 11:43:50 am »
Quote
Anyone know if this CF wireless card works on the Z 3k?
Company:       Planex Communications Inc.
Product:     GW-CF11X
[div align=\"right\"][{POST_SNAPBACK}][/a][/div]
I have this card, and it works perfectly with the 3000.

That being said, I had to download and install an update to the wlan drivers.

Point your browser to [a href=\"http://digit.que.ne.jp/visit/index.cgi?Linux%A5%B6%A5%A6%A5%EB%A5%B9%2FGW-CF11X%A5%C9%A5%E9%A5%A4%A5%D0]http://digit.que.ne.jp/visit/index.cgi?Lin...%E9%A5%A4%A5%D0[/url] and get the linux-wlan-ng_0.2.1pre26-c3000-1_arm.ipk package in the C3000 section of the page (approx. second page when scrollnig down from the start).
Sorry I can't post the direct link to the ipk file as I'm in a cybercaef right now, and the right click  to get the URL is inhibited!

After installing that package, the card was recognized and I was connected in a matter of seconds.
Patrick

lucipard

  • Newbie
  • *
  • Posts: 4
    • View Profile
Compilation Of Wifi Cf For 3k
« Reply #23 on: February 20, 2005, 06:34:22 am »
I have a Buffalo WLI2-CF-S11. Initially it only worked with the prism2 driver and WEP.

I now have it working with hostap and WPA, that was a bit of work though and i don't consider it finished either. The main steps were

- merge wireless extensions 15 from kernel 2.4.21 (i used this one as a basis: http://tetsu.homelinux.org/zaurus/kernel/v17f/)
- recompile the wireless tools and hostap for this kernel (enable all the firmware update functions)
- upgrade station firmware on the card from 1.3.5 to 1.7.4 (see http://linux.junsun.net/intersil-prism/)
- modify pcmcia scripts, mostly /etc/pcmcia/wlan-ng, also /etc/pcmcia/network

perseus

  • Jr. Member
  • **
  • Posts: 93
    • View Profile
Compilation Of Wifi Cf For 3k
« Reply #24 on: February 24, 2005, 07:07:18 pm »
ambicom works right out of the box. Sending this from my Z! Could someone tell me what the range is and is ambicom a quality product. I got it because I had read this forum. I used to have a netgear 701 that I used with hp2215 but the range was terrible. Will the person using the netgear give me his overall satisfaction with it?

I also saw a lynksys G card. Has anyone tried this yet? Almost bought it at frys but it would have made a big dent in my wallet. I am curious if it would work, perhaps I wil try it this weekend.

What do you guys recommend as one of the best cards out there?

ChrisZ

  • Newbie
  • *
  • Posts: 23
    • View Profile
    • http://
Compilation Of Wifi Cf For 3k
« Reply #25 on: March 03, 2005, 02:50:17 pm »
I think the Asus WL-110 works, but without encryption (at least without 128 Bit).

Did anyone have success with WEP?
SL-C3000 with Sharp ROM 1.11 JP and Testu kernel 18a
Socket Bluetooth CF Card (Rev F), Asus WL-110 WLAN Card, 4GB CF inside

perseus

  • Jr. Member
  • **
  • Posts: 93
    • View Profile
Compilation Of Wifi Cf For 3k
« Reply #26 on: March 03, 2005, 03:44:59 pm »
I returned my ambicom to frys. It would get too hot and I could not disconnect from the network. I also tried the linsys G card without success. I ordered the Asus WL-110 from mobile planet for $52.00. It worked right out of the box. With WEP-128 bit encription.

The range seems to be better than the ambicom and does not seem to get as hot. I think the battery lasts longer also but I have not tested this.

ChrisZ

  • Newbie
  • *
  • Posts: 23
    • View Profile
    • http://
Compilation Of Wifi Cf For 3k
« Reply #27 on: March 03, 2005, 03:57:13 pm »
I'm using the Symbol Spectrum 24 card. And everything works fine except for the following problem:

Sometimes (one of ten or twenty times), I connect to the WLAN (or resume from suspend with enabled WLAN card) and the Zaurus freezes. No way to get him work again  until I remove and insert the card again. Then I can try to connect and often - not always - the connect works and everything is fine again.

Strange!

Does anyone else have the described problem?
SL-C3000 with Sharp ROM 1.11 JP and Testu kernel 18a
Socket Bluetooth CF Card (Rev F), Asus WL-110 WLAN Card, 4GB CF inside

ChrisZ

  • Newbie
  • *
  • Posts: 23
    • View Profile
    • http://
Compilation Of Wifi Cf For 3k
« Reply #28 on: March 03, 2005, 04:00:09 pm »
Quote
I ordered the Asus WL-110 from mobile planet for $52.00. It worked right out of the box. With WEP-128 bit encription.

Can you tell me how to enable the encryption. Does
Code: [Select]
iwconfig wlan0 enc 0000-0000-0000-0000-0000-0000-00 work?

Have you installed the new kernel 1.11jp?
SL-C3000 with Sharp ROM 1.11 JP and Testu kernel 18a
Socket Bluetooth CF Card (Rev F), Asus WL-110 WLAN Card, 4GB CF inside

perseus

  • Jr. Member
  • **
  • Posts: 93
    • View Profile
Compilation Of Wifi Cf For 3k
« Reply #29 on: March 04, 2005, 09:06:30 pm »
ChrisZ,

I do not know if that code works. I have not had to do any of that. I am faily new at linux and am still reading about commands on the terminal window. All I did was go into the network settings and set up the wep encription as required by my netgear wireless router.

Have you tried the newtwork settings?