Linux version 2.6.14-rc1-3.5.4 (mickey@c3po.tm.informatik.uni-frankfurt.de) (gcc version 3.4.4) #1 PREEMPT Mon Mar 13 15:09:39 CET 2006
CPU: XScale-PXA255 [69052d06] revision 6 (ARMv5TE)
Machine: SHARP Husky
Ignoring unrecognised tag 0x00000000
Memory policy: ECC disabled, Data cache writeback
Memory clock: 99.53MHz (*27)
Run Mode clock: 199.07MHz (*2)
Turbo Mode clock: 398.13MHz (*2.0, active)
On node 0 totalpages: 16384
  DMA zone: 16384 pages, LIFO batch:7
  Normal zone: 0 pages, LIFO batch:1
  HighMem zone: 0 pages, LIFO batch:1
Built 1 zonelists
Kernel command line: console=ttyS0,115200n8 console=tty1 noinitrd root=/dev/mtdblock2 rootfstype=jffs2   quiet
PID hash table entries: 512 (order: 9, 8192 bytes)
Console: colour dummy device 80x30
Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
Memory: 64MB = 64MB total
Memory: 61952KB available (2069K code, 407K data, 392K init)
Calibrating delay loop... 397.31 BogoMIPS (lpj=1986560)
Mount-cache hash table entries: 512
[ELPP] Searching for initrd_theme preferences... Not found or Incomplete
[ELPP] Disabling the Progress Patch
CPU: Testing write buffer coherency: ok
softlockup thread 0 started up.
NET: Registered protocol family 16
Sharp Scoop Device found at 0x10800000 -> 0xc4800000
NetWinder Floating Point Emulator V0.97 (double precision)
JFFS2 version 2.2. (NAND) (C) 2001-2003 Red Hat, Inc.
Initializing Cryptographic API
Corgi Backlight Driver Initialized.
Found w100 at 0x08000000.
Console: switching to colour frame buffer device 80x30
fb0: w100fb frame buffer device
SA1100 Real Time Clock driver v1.02
ttyS0 at MMIO 0x40100000 (irq = 15) is a FFUART
ttyS1 at MMIO 0x40200000 (irq = 14) is a BTUART
ttyS2 at MMIO 0x40700000 (irq = 13) is a STUART
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered
loop: loaded (max 8 devices)
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 50MHz system bus speed for PIO modes; override with idebus=xx
Sharp SL series flash device: 800000 at 0
Using static partision definition
Creating 1 MTD partitions on "sharpsl-flash":
0x00120000-0x007f0000 : "Boot PROM Filesystem"
NAND device: Manufacturer ID: 0xec, Chip ID: 0x79 (Samsung NAND 128MiB 3,3V 8-bit)
Scanning device for bad blocks
Bad eraseblock 32 at 0x00080000
Bad eraseblock 3095 at 0x0305c000
Bad eraseblock 3099 at 0x0306c000
Creating 3 MTD partitions on "sharpsl-nand":
0x00000000-0x00700000 : "System Area"
Charge LED On
0x00700000-0x03c00000 : "Root Filesystem"
0x03c00000-0x08000000 : "Home Filesystem"
pxa2xx_udc: version 4-May-2005
input: Corgi Keyboard Registered
input: Corgi Touchscreen Registered
I2C: i2c-0: PXA I2C adapter
i2c: error: exhausted retries
i2c: msg_num: 0 msg_idx: -2000 msg_ptr: 0
i2c: ICR: 000007e0 ISR: 00000002
i2c: log: [00000446:000007e0] 
Corgi audio driver initialize
NET: Registered protocol family 2
IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
TCP established hash table entries: 4096 (order: 3, 32768 bytes)
TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
TCP: Hash tables configured (established 4096 bind 4096)
TCP reno registered
TCP bic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
Probing IDE interface ide0...
Charge LED On
hda: Hitachi XX.V.3.3.0.0, CFA DISK drive
Charge LED Off
Charge LED Off
ide0 at 0xc4820000-0xc4820007,0xc482000e on irq 40
hda: max request size: 128KiB
hda: 500400 sectors (256 MB) w/1KiB Cache, CHS=695/15/48
hda: cache flushes not supported
 hda: hda1
ide-cs: hda: Vcc = 3.3, Vpp = 0.0
VFS: Mounted root (jffs2 filesystem) readonly.
Freeing init memory: 392K
FAT: Unrecognized mount option "user" or missing value
VFS: Can't find an ext2 filesystem on dev hda1.
VFS: Can't find an ext2 filesystem on dev hda1.
FAT: Unrecognized mount option "user" or missing value
FAT: Unrecognized mount option "user" or missing value
Bluetooth: Core ver 2.7
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP ver 2.7
Bluetooth: L2CAP socket layer initialized
Bluetooth: HIDP (Human Interface Emulation) ver 1.1
NET: Registered protocol family 10
IPv6 over IPv4 tunneling driver
NET: Registered protocol family 23
IrCOMM protocol (Dag Brattli)
Bluetooth: RFCOMM ver 1.5
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Charge LED On
usbcore: registered new driver usbfs
usbcore: registered new driver hub
usbcore: deregistering driver usbfs
usbcore: deregistering driver hub
FAT: Unrecognized mount option "user" or missing value
VFS: Can't find an ext2 filesystem on dev hda1.
VFS: Can't find an ext2 filesystem on dev hda1.
FAT: Unrecognized mount option "user" or missing value
FAT: Unrecognized mount option "user" or missing value