# dmesg s2 jffs2_orphaned_inodes=delete mem=64M Relocating machine vectors to 0xffff0000 Console: colour dummy device 80x30 Calibrating delay loop... 137.21 BogoMIPS Memory: 64MB = 64MB total Memory: 62328KB available (1688K code, 363K data, 80K init) Dentry-cache hash table entries: 8192 (order: 4, 65536 bytes) Inode-cache hash table entries: 4096 (order: 3, 32768 bytes) Mount-cache hash table entries: 1024 (order: 1, 8192 bytes) Buffer-cache hash table entries: 4096 (order: 2, 16384 bytes) Page-cache hash table entries: 16384 (order: 4, 65536 bytes) POSIX conformance testing by UNIFIX Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket GA Chip: L1 UCB1200 generic module installed suspend temp = 453 RCSR = 1 suspend main adc = 625(625) fatal chk = 402 full reset ! suspend main adc = 634(634) fatal chk = 408 apm: BIOS version 1.2 Flags 0x02 (Driver version 1.14) apm: Current AC Status : 1 batok installed Starting kswapd JFFS2 version 2.1. (C) 2001 Red Hat, Inc., designed by Axis Communications AB. comadj = 157,44414d43,44414d43 Console: switching to colour frame buffer device 60x53 Collie frame buffer driver initialized. keyboard initilaized. pty: 256 Unix98 ptys configured Serial driver version 5.05c (2001-07-08) with no serial options enabled COLLIE serial driver version 1.3 ttyS0 on SA1100 UART3 (irq 17) ttyS1 on SA1100 UART1 (irq 15)ttyS2 on SA1100 UART2 (irq 16), using IRDA touch adj= 18121,24988,-1310720,-2883584 ucb1200 touch screen driver initialized sharpled_init: done. SA1100 Real Time Clock driver v1.00 block: 128 slots per queue, batch=32 Uniform Multi-Platform E-IDE driver Revision: 6.31 ide: Assuming 50MHz system bus speed for PIO modes; override with idebus=xx loop: loaded (max 8 devices) PPP generic driver version 2.4.1 PPP BSD Compression module registered ide-cs.c 1.26 1999/11/16 02:10:49 (David Hinds) Collie Sound Driver Installed TC35143F audio driver initialized MTD Sharp chip driver SA1100 flash: probing 32-bit flash bus Using static partition definition Creating 6 MTD partitions on "SA1100 flash": 0x00000000-0x00020000 : "Angel Monitor" 0x00020000-0x00040000 : "CF Updater" 0x00040000-0x000c0000 : "Diagnostics" 0x000c0000-0x001c0000 : "kernel" 0x001c0000-0x00fe0000 : "jffs2" 0x00fe0000-0x01000000 : "angel stuff" Linux Kernel Card Services 3.1.22 options: [pm] SA-1100 PCMCIA (CS release 3.1.22) sa1100_pcmcia_init(0) sa1100_pcmcia_init(1) Frontlight Driver Initialized. NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP IP: routing cache hash table of 512 buckets, 4Kbytes TCP: Hash tables configured (established 4096 bind 4096) NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. NetWinder Floating Point Emulator V0.95 (c) 1998-1999 Rebel.com IrCOMM protocol (Dag Brattli) VFS: Mounted root (jffs2 filesystem) readonly. Freeing init memory: 80K klips_info:ipsec_init: KLIPS startup, Openswan KLIPS IPsec stack version: 2.2.0 klips_info:ipsec_alg_init: KLIPS alg v=0.8.1-0 (EALG_MAX=255, AALG_MAX=251) klips_info:ipsec_alg_init: calling ipsec_alg_static_init() IPv6 v0.8 for NET4.0 IPv6 over IPv4 tunneling driver usbdcore: usbdcore 0.1 035 2002-06-12 20:00 (dbg="") net_fd 0.1 035 2002-06-12 20:00 (dbg="",alwaysup=0,OUT=64,IN=64) vendorID: 4dd productID: 8004 sa1100_bi 0.2 035 2002-06-12 20:00 (dbg="") bi_modinit: call udc_startup_events bi_device_event: call udc_enable bi_device_event: call udc_all_interrupts SD Driver Initialized. sharp_mmcsd 0.21 27 Sep 2002 VFS: Disk change detected on device mmcd(60,1) Partition check: mmcda: mmcda1 VFS: Disk change detected on device mmcd(60,1) mmcda: mmcda1 VFS: Disk change detected on device mmcd(60,1) mmcda: mmcda1 EXT2-fs: Unrecognized mount option quiet VFS: Disk change detected on device mmcd(60,1) mmcda: mmcda1 VFS: Disk change detected on device mmcd(60,1) mmcda: mmcda1 VFS: Disk change detected on device mmcd(60,1) mmcda: mmcda1 VFS: Disk change detected on device mmcd(60,1) mmcda: mmcda1 EXT2-fs warning: mounting unchecked fs, running e2fsck is recommended VFS: Disk change detected on device mmcd(60,2) mmcda: mmcda1 MSDOS FS: IO charset utf8 FAT: unable to read boot sector FAT: freeing iocharset=utf8 VFS: Disk change detected on device mmcd(60,2) mmcda: mmcda1 jffs2: attempt to mount non-MTD device 3c:02 VFS: Disk change detected on device mmcd(60,2) mmcda: mmcda1 FAT: unable to read boot sector VFS: Disk change detected on device mmcd(60,2) mmcda: mmcda1 jffs2: attempt to mount non-MTD device 3c:02 VFS: Disk change detected on device mmcd(60,2) mmcda: mmcda1 FAT: unable to read boot sector VFS: Disk change detected on device mmcd(60,2) mmcda: mmcda1 jffs2: attempt to mount non-MTD device 3c:02 VFS: Disk change detected on device mmcd(60,3) mmcda: mmcda1 MSDOS FS: IO charset utf8 FAT: unable to read boot sector FAT: freeing iocharset=utf8 VFS: Disk change detected on device mmcd(60,3) mmcda: mmcda1 jffs2: attempt to mount non-MTD device 3c:03 VFS: Disk change detected on device mmcd(60,3) mmcda: mmcda1 FAT: unable to read boot sector VFS: Disk change detected on device mmcd(60,3) mmcda: mmcda1 jffs2: attempt to mount non-MTD device 3c:03 VFS: Disk change detected on device mmcd(60,3) mmcda: mmcda1 FAT: unable to read boot sector VFS: Disk change detected on device mmcd(60,3) mmcda: mmcda1 jffs2: attempt to mount non-MTD device 3c:03 VFS: Disk change detected on device mmcd(60,4) mmcda: mmcda1 MSDOS FS: IO charset utf8 FAT: unable to read boot sector FAT: freeing iocharset=utf8 VFS: Disk change detected on device mmcd(60,4) mmcda: mmcda1 jffs2: attempt to mount non-MTD device 3c:04 VFS: Disk change detected on device mmcd(60,4) mmcda: mmcda1 FAT: unable to read boot sector VFS: Disk change detected on device mmcd(60,4) mmcda: mmcda1 jffs2: attempt to mount non-MTD device 3c:04 VFS: Disk change detected on device mmcd(60,4) mmcda: mmcda1 FAT: unable to read boot sector VFS: Disk change detected on device mmcd(60,4) mmcda: mmcda1 jffs2: attempt to mount non-MTD device 3c:04 IrDA: Registered device irda1 hostap_crypt: registered algorithm 'NULL' hostap_cs: 0.3.7 - 2005-02-12 (Jouni Malinen ) hostap_cs: setting Vcc=33 (constant) hostap_cs: CS_EVENT_CARD_INSERTION hostap_cs: ignoring Vcc=33 (from config) Checking CFTABLE_ENTRY 0x01 (default 0x01) IO window settings: cfg->io.nwin=1 dflt.io.nwin=1 io->flags = 0x0046, io.base=0x0000, len=64 hostap_cs: Registered netdevice wifi0 hostap_cs: index 0x01: Vcc 3.3, irq 35, io 0xc4850000-0xc485003f prism2_hw_init: initialized in 200 ms wifi0: NIC: id=0x800c v1.0.0 wifi0: PRI: id=0x15 v1.0.5 wifi0: STA: id=0x1f v1.3.4 wifi0: defaulting to bogus WDS frame as a workaround for firmware bug in Host AP mode WDS wifi0: registered netdevice wlan0 hostap_crypt: registered algorithm 'WEP' wifi0: TXEXC - status=0x0004 ([Discon]) tx_control=000c retry_count=0 tx_rate=0 fc=0x4108 (Data::0 ToDS) A1=00:00:00:00:00:00 A2=00:06:25:ac:de:0f A3=ff:ff:ff:ff:ff:ff A4=00:00:00:00:00:00 wifi0: LinkStatus=6 (Association failed) wifi0: LinkStatus: BSSID=44:44:44:44:44:44 wifi0: TXEXC - status=0x0004 ([Discon]) tx_control=000c retry_count=0 tx_rate=0 fc=0x4108 (Data::0 ToDS) A1=44:44:44:44:44:44 A2=00:06:25:ac:de:0f A3=33:33:ff:ac:de:0f A4=00:00:00:00:00:00 wifi0: TXEXC - status=0x0004 ([Discon]) tx_control=000c retry_count=0 tx_rate=0 fc=0x4108 (Data::0 ToDS) A1=44:44:44:44:44:44 A2=00:06:25:ac:de:0f A3=33:33:00:00:00:02 A4=00:00:00:00:00:00 wifi0: LinkStatus=1 (Connected) wifi0: LinkStatus: BSSID=00:80:c8:b7:f1:de wlan0: no IPv6 routers present