# Makefile.in generated by automake 1.9.6 from Makefile.am.
# doc/Makefile.  Generated from Makefile.in by configure.

# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
# 2003, 2004, 2005  Free Software Foundation, Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.

# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.



srcdir = .
top_srcdir = ..

pkgdatadir = $(datadir)/vice
pkglibdir = $(libdir)/vice
pkgincludedir = $(includedir)/vice
top_builddir = ..
am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
INSTALL = /usr/bin/install -c
install_sh_DATA = $(install_sh) -c -m 644
install_sh_PROGRAM = $(install_sh) -c
install_sh_SCRIPT = $(install_sh) -c
INSTALL_HEADER = $(INSTALL_DATA)
transform = $(program_transform_name)
NORMAL_INSTALL = :
PRE_INSTALL = :
POST_INSTALL = :
NORMAL_UNINSTALL = :
PRE_UNINSTALL = :
POST_UNINSTALL = :
build_triplet = armv5tel-unknown-linux
host_triplet = armv5tel-unknown-linux
subdir = doc
DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in texinfo.tex
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/acinclude.m4 \
	$(top_srcdir)/configure.in
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
	$(ACLOCAL_M4)
mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs
CONFIG_HEADER = $(top_builddir)/src/config.h
CONFIG_CLEAN_FILES =
SOURCES =
DIST_SOURCES =
INFO_DEPS = $(srcdir)/vice.info
am__TEXINFO_TEX_DIR = $(srcdir)
DVIS = vice.dvi
PDFS = vice.pdf
PSS = vice.ps
HTMLS = vice.html
TEXINFOS = vice.texi
TEXI2DVI = texi2dvi
TEXI2PDF = $(TEXI2DVI) --pdf --batch
MAKEINFOHTML = $(MAKEINFO) --html
AM_MAKEINFOHTMLFLAGS = $(AM_MAKEINFOFLAGS)
DVIPS = dvips
RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
	html-recursive info-recursive install-data-recursive \
	install-exec-recursive install-info-recursive \
	install-recursive installcheck-recursive installdirs-recursive \
	pdf-recursive ps-recursive uninstall-info-recursive \
	uninstall-recursive
am__installdirs = "$(DESTDIR)$(infodir)" "$(DESTDIR)$(docdir)"
am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
am__vpath_adj = case $$p in \
    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
    *) f=$$p;; \
  esac;
am__strip_dir = `echo $$p | sed -e 's|^.*/||'`;
docDATA_INSTALL = $(INSTALL_DATA)
DATA = $(doc_DATA)
ETAGS = etags
CTAGS = ctags
DIST_SUBDIRS = $(SUBDIRS)
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
ACLOCAL = ${SHELL} /mnt/card/vice-1.22/missing --run aclocal-1.9
ALTERNATE_DOCDIR_FALSE = 
ALTERNATE_DOCDIR_TRUE = #
AMDEP_FALSE = #
AMDEP_TRUE = 
AMIGA_COMPILE_FALSE = 
AMIGA_COMPILE_TRUE = #
AMTAR = ${SHELL} /mnt/card/vice-1.22/missing --run tar
AR = ar
ARCH_DIR = $(top_builddir)/src/arch/unix
ARCH_EXTRA_SUBDIR = gui x11 readline
ARCH_INCLUDES = -I$(top_srcdir)/src/arch/unix
ARCH_LIBS = $(top_builddir)/src/arch/unix/libarch.a $(top_builddir)/src/arch/unix/gui/libarchgui.a $(top_builddir)/src/arch/unix/x11/libx11ui.a $(top_builddir)/src/arch/unix/x11/xaw/libxawui.a $(top_builddir)/src/arch/unix/x11/xaw/widgets/libwidgets.a $(top_builddir)/src/arch/unix/libarch.a $(top_builddir)/src/arch/unix/gui/libarchgui.a $(top_builddir)/src/arch/unix/x11/libx11ui.a
ARCH_SRC_DIR = $(top_srcdir)/src/arch/unix
AUTOCONF = ${SHELL} /mnt/card/vice-1.22/missing --run autoconf
AUTOHEADER = ${SHELL} /mnt/card/vice-1.22/missing --run autoheader
AUTOMAKE = ${SHELL} /mnt/card/vice-1.22/missing --run automake-1.9
AWK = mawk
BEOS_COMPILE_FALSE = 
BEOS_COMPILE_TRUE = #
BINDIR = 
CATALOGS = 
CATOBJEXT = .gmo
CC = gcc
CCDEPMODE = depmode=gcc3
CFLAGS = -O2 -mcpu=xscale -mtune=xscale -pipe
CPP = gcc -E
CPPFLAGS =  
CROSS = false
CROSS_FALSE = 
CROSS_TRUE = #
CXX = 
CXXCPP = 
CXXDEPMODE = 
CXXFLAGS = -O2 -mcpu=xscale -mtune=xscale -pipe
CYGPATH_W = echo
DATADIRNAME = 
DEFS = -DHAVE_CONFIG_H
DEPDIR = .deps
DOS_TFE_PCAP_LIB = 
ECHO_C = 
ECHO_N = -n
ECHO_T = 
EGREP = grep -E
EXEEXT = 
FFMPEG_INCLUDES = 
FFMPEG_LIBS = 
FULLSCREEN_DRIVERS = 
GENCAT = 
GFXOUTPUT_DRIVERS =  pngdrv.o
GFXOUTPUT_LIBS = 
GMOFILES =  de.gmo fr.gmo it.gmo sv.gmo pl.gmo nl.gmo hu.gmo
GMSGFMT = :
GNOMEUI_FALSE = 
GNOMEUI_TRUE = #
HAVE_RAWDRIVE_FALSE = #
HAVE_RAWDRIVE_TRUE = 
HAVE_READLINE = 
HAVE_REALDEVICE_FALSE = 
HAVE_REALDEVICE_TRUE = #
HAVE_RESID_FALSE = 
HAVE_RESID_TRUE = #
HAVE_RS232_FALSE = #
HAVE_RS232_TRUE = 
HAVE_TRANSLATION_FALSE = 
HAVE_TRANSLATION_TRUE = #
INSTALL_DATA = ${INSTALL} -m 644
INSTALL_PROGRAM = ${INSTALL}
INSTALL_SCRIPT = ${INSTALL}
INSTALL_STRIP_PROGRAM = ${SHELL} $(install_sh) -c -s
INSTOBJEXT = 
INTLDEPS = 
INTLLIBS = 
INTLOBJS = 
JOY_LIBS = 
LDFLAGS = 
LEX = ${SHELL} /mnt/card/vice-1.22/missing --run flex
LEXLIB = 
LEX_OUTPUT_ROOT = 
LIBOBJS = 
LIBS = -lm 
LINKCC = $(CC)
LN_S = cp -p
LTLIBOBJS = 
MACOSX_COCOA_FALSE = 
MACOSX_COCOA_TRUE = #
MAKEINFO = ${SHELL} /mnt/card/vice-1.22/missing --run makeinfo
MAKE_BINDIST_FALSE = 
MAKE_BINDIST_TRUE = #
MKINSTALLDIRS = ./mkinstalldirs
MSDOS_COMPILE_FALSE = 
MSDOS_COMPILE_TRUE = #
MSGFMT = no
NEED_READLINE_FALSE = #
NEED_READLINE_TRUE = 
NETPLAY_LIBS = -lnsl 
NLS_LOCALEDIR = 
OBJC = gcc
OBJCDEPMODE = depmode=gcc3
OBJCFLAGS = -O2 -mcpu=xscale -mtune=xscale -pipe
OBJEXT = o
OS2_COMPILE_FALSE = 
OS2_COMPILE_TRUE = #
PACKAGE = vice
PACKAGE_BUGREPORT = 
PACKAGE_NAME = 
PACKAGE_STRING = 
PACKAGE_TARNAME = 
PACKAGE_VERSION = 
PATH_SEPARATOR = :
PERL = /usr/bin/perl
POFILES =  de.po fr.po it.po sv.po pl.po nl.po hu.po
POSUB = po
RANLIB = ranlib
READLINE = $(top_builddir)/src/arch/unix/readline/libreadline.a
READLINE_LIBS = 
RESID_DEP = 
RESID_DIR = 
RESID_INCLUDES = 
RESID_LIBS = 
RISCOS_COMPILE_FALSE = 
RISCOS_COMPILE_TRUE = #
SET_MAKE = 
SHELL = /bin/sh
SOUND_AIX_OBJ = 
SOUND_DRIVERS = 
SOUND_HPUX_OBJ = 
SOUND_LIBS = 
SOUND_MIDAS_OBJ = 
SOUND_SDL_OBJ = 
SOUND_SGI_OBJ = 
SOUND_USS_OBJ = 
STRIP = strip
SYNC = 
TFE_LIBS = 
UI_LIBS = 
UNIX_COMPILE_FALSE = #
UNIX_COMPILE_TRUE = 
UNIX_GP2X_COMPILE_FALSE = 
UNIX_GP2X_COMPILE_TRUE = #
UNIX_MACOSX_COMPILE_FALSE = 
UNIX_MACOSX_COMPILE_TRUE = #
UNIX_MACOSX_UITYPE = 
UNIX_QNX_COMPILE_FALSE = 
UNIX_QNX_COMPILE_TRUE = #
UNIX_SOLARIS_COMPILE_FALSE = 
UNIX_SOLARIS_COMPILE_TRUE = #
USE_INCLUDED_LIBINTL = 
USE_MIDAS_SOUND_FALSE = 
USE_MIDAS_SOUND_TRUE = #
USE_NLS = yes
VERSION = 1.22
VERSION_RC = 1,22,0,0
VICEDIR = /usr/local/lib/vice
VICE_LIBPNG = $(top_builddir)/src/lib/lpng/libpng.a
VICE_LIBPNG_DEP = libpng
VICE_LIBPNG_DIR = lib/lpng
VICE_LIBPNG_INCLUDES = -I$(top_srcdir)/src/lib/lpng
VICE_VERSION = 1.22
VICE_VERSION_BUILD = 0
VICE_VERSION_MAJOR = 1
VICE_VERSION_MINOR = 22
VICE_ZLIB = $(top_builddir)/src/lib/zlib/libz.a
VICE_ZLIB_DEP = libz
VICE_ZLIB_DIR = lib/zlib
VICE_ZLIB_INCLUDES = -I$(top_srcdir)/src/lib/zlib
WIN32_COMPILE_FALSE = 
WIN32_COMPILE_TRUE = #
WINDRES = 
WRC = 
X128_WINRES = 
X64_WINRES = 
XCBM2_WINRES = 
XGETTEXT = :
XPET_WINRES = 
XPLUS4_WINRES = 
XVIC_WINRES = 
X_CFLAGS = 
X_EXTRA_LIBS = 
X_LIBS =  -lXaw -lXpm -lXmu -lXt -lXext -lX11 -lSM -lICE -lnsl 
X_PRE_LIBS =  -lSM -lICE
YACC = yacc
ZLIB_LIBS = 
ac_ct_CC = gcc
ac_ct_CXX = 
ac_ct_RANLIB = ranlib
ac_ct_STRIP = strip
am__fastdepCC_FALSE = #
am__fastdepCC_TRUE = 
am__fastdepCXX_FALSE = 
am__fastdepCXX_TRUE = #
am__fastdepOBJC_FALSE = #
am__fastdepOBJC_TRUE = 
am__include = include
am__leading_dot = .
am__quote = 
am__tar = ${AMTAR} chof - "$$tardir"
am__untar = ${AMTAR} xf -
artsc_config = 
bindir = ${exec_prefix}/bin
build = armv5tel-unknown-linux
build_alias = 
build_cpu = armv5tel
build_os = linux
build_vendor = unknown
cxx = 
datadir = ${prefix}/share
exec_prefix = ${prefix}
host = armv5tel-unknown-linux
host_alias = 
host_cpu = armv5tel
host_os = linux
host_vendor = unknown
includedir = ${prefix}/include
infodir = ${prefix}/info
install_sh = /mnt/card/vice-1.22/install-sh
libdir = ${exec_prefix}/lib
libexecdir = ${exec_prefix}/libexec
localstatedir = ${prefix}/var
mandir = ${prefix}/man
mkdir_p = mkdir -p --
oldincludedir = /usr/include
prefix = /usr/local
program_transform_name = s,x,x,
sbindir = ${exec_prefix}/sbin
sdl_config = 
sharedstatedir = ${prefix}/com
subdirs = 
sysconfdir = ${prefix}/etc
target_alias = 
x128_LDFLAGS = 
x64_LDFLAGS = 
xcbm2_LDFLAGS = 
xpet_LDFLAGS = 
xplus4_LDFLAGS = 
xvic_LDFLAGS = 
docdir = $(VICEDIR)/doc
#docdir = $(prefix)/share/doc/vice
doc_DATA = \
	Minix-Howto.txt \
	MSDOS-Ethernet-Howto.txt \
	MSDOS-Howto.txt \
	NLS-Howto.txt \
	Readme.beos \
	Readme.dos \
	ReadmeMacOSX.txt \
	Win32-Howto.txt \
	cartconv.txt \
	iec-bus.txt \
	mon.txt \
	openGLsync-howto.txt

info_TEXINFOS = vice.texi
EXTRA_DIST = $(doc_DATA)
SUBDIRS = html
all: all-recursive

.SUFFIXES:
.SUFFIXES: .dvi .html .info .pdf .ps .texi
$(srcdir)/Makefile.in:  $(srcdir)/Makefile.am  $(am__configure_deps)
	@for dep in $?; do \
	  case '$(am__configure_deps)' in \
	    *$$dep*) \
	      cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \
		&& exit 0; \
	      exit 1;; \
	  esac; \
	done; \
	echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu  doc/Makefile'; \
	cd $(top_srcdir) && \
	  $(AUTOMAKE) --gnu  doc/Makefile
.PRECIOUS: Makefile
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
	@case '$?' in \
	  *config.status*) \
	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
	  *) \
	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
	esac;

$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh

$(top_srcdir)/configure:  $(am__configure_deps)
	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
$(ACLOCAL_M4):  $(am__aclocal_m4_deps)
	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh

.texi.info:
	restore=: && backupdir="$(am__leading_dot)am$$$$" && \
	am__cwd=`pwd` && cd $(srcdir) && \
	rm -rf $$backupdir && mkdir $$backupdir && \
	if ($(MAKEINFO) --version) >/dev/null 2>&1; then \
	  for f in $@ $@-[0-9] $@-[0-9][0-9] $(@:.info=).i[0-9] $(@:.info=).i[0-9][0-9]; do \
	    if test -f $$f; then mv $$f $$backupdir; restore=mv; else :; fi; \
	  done; \
	else :; fi && \
	cd "$$am__cwd"; \
	if $(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I $(srcdir) \
	 -o $@ $<; \
	then \
	  rc=0; \
	  cd $(srcdir); \
	else \
	  rc=$$?; \
	  cd $(srcdir) && \
	  $$restore $$backupdir/* `echo "./$@" | sed 's|[^/]*$$||'`; \
	fi; \
	rm -rf $$backupdir; exit $$rc

.texi.dvi:
	TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \
	MAKEINFO='$(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I $(srcdir)' \
	$(TEXI2DVI) $<

.texi.pdf:
	TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \
	MAKEINFO='$(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I $(srcdir)' \
	$(TEXI2PDF) $<

.texi.html:
	rm -rf $(@:.html=.htp)
	if $(MAKEINFOHTML) $(AM_MAKEINFOHTMLFLAGS) $(MAKEINFOFLAGS) -I $(srcdir) \
	 -o $(@:.html=.htp) $<; \
	then \
	  rm -rf $@; \
	  if test ! -d $(@:.html=.htp) && test -d $(@:.html=); then \
	    mv $(@:.html=) $@; else mv $(@:.html=.htp) $@; fi; \
	else \
	  if test ! -d $(@:.html=.htp) && test -d $(@:.html=); then \
	    rm -rf $(@:.html=); else rm -Rf $(@:.html=.htp) $@; fi; \
	  exit 1; \
	fi
$(srcdir)/vice.info: vice.texi 
vice.dvi: vice.texi 
vice.pdf: vice.texi 
vice.html: vice.texi 
.dvi.ps:
	TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \
	$(DVIPS) -o $@ $<

uninstall-info-am:
	@$(PRE_UNINSTALL)
	@if (install-info --version && \
	     install-info --version 2>&1 | sed 1q | grep -i -v debian) >/dev/null 2>&1; then \
	  list='$(INFO_DEPS)'; \
	  for file in $$list; do \
	    relfile=`echo "$$file" | sed 's|^.*/||'`; \
	    echo " install-info --info-dir='$(DESTDIR)$(infodir)' --remove '$(DESTDIR)$(infodir)/$$relfile'"; \
	    install-info --info-dir="$(DESTDIR)$(infodir)" --remove "$(DESTDIR)$(infodir)/$$relfile"; \
	  done; \
	else :; fi
	@$(NORMAL_UNINSTALL)
	@list='$(INFO_DEPS)'; \
	for file in $$list; do \
	  relfile=`echo "$$file" | sed 's|^.*/||'`; \
	  relfile_i=`echo "$$relfile" | sed 's|\.info$$||;s|$$|.i|'`; \
	  (if cd "$(DESTDIR)$(infodir)"; then \
	     echo " cd '$(DESTDIR)$(infodir)' && rm -f $$relfile $$relfile-[0-9] $$relfile-[0-9][0-9] $$relfile_i[0-9] $$relfile_i[0-9][0-9]"; \
	     rm -f $$relfile $$relfile-[0-9] $$relfile-[0-9][0-9] $$relfile_i[0-9] $$relfile_i[0-9][0-9]; \
	   else :; fi); \
	done

dist-info: $(INFO_DEPS)
	@srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
	list='$(INFO_DEPS)'; \
	for base in $$list; do \
	  case $$base in \
	    $(srcdir)/*) base=`echo "$$base" | sed "s|^$$srcdirstrip/||"`;; \
	  esac; \
	  if test -f $$base; then d=.; else d=$(srcdir); fi; \
	  for file in $$d/$$base*; do \
	    relfile=`expr "$$file" : "$$d/\(.*\)"`; \
	    test -f $(distdir)/$$relfile || \
	      cp -p $$file $(distdir)/$$relfile; \
	  done; \
	done

mostlyclean-aminfo:
	-rm -rf vice.aux vice.cp vice.cps vice.fn vice.fns vice.ky vice.kys vice.log \
	  vice.pg vice.pgs vice.tmp vice.toc vice.tp vice.tps vice.vr \
	  vice.vrs vice.dvi vice.pdf vice.ps vice.html

maintainer-clean-aminfo:
	@list='$(INFO_DEPS)'; for i in $$list; do \
	  i_i=`echo "$$i" | sed 's|\.info$$||;s|$$|.i|'`; \
	  echo " rm -f $$i $$i-[0-9] $$i-[0-9][0-9] $$i_i[0-9] $$i_i[0-9][0-9]"; \
	  rm -f $$i $$i-[0-9] $$i-[0-9][0-9] $$i_i[0-9] $$i_i[0-9][0-9]; \
	done
install-docDATA: $(doc_DATA)
	@$(NORMAL_INSTALL)
	test -z "$(docdir)" || $(mkdir_p) "$(DESTDIR)$(docdir)"
	@list='$(doc_DATA)'; for p in $$list; do \
	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
	  f=$(am__strip_dir) \
	  echo " $(docDATA_INSTALL) '$$d$$p' '$(DESTDIR)$(docdir)/$$f'"; \
	  $(docDATA_INSTALL) "$$d$$p" "$(DESTDIR)$(docdir)/$$f"; \
	done

uninstall-docDATA:
	@$(NORMAL_UNINSTALL)
	@list='$(doc_DATA)'; for p in $$list; do \
	  f=$(am__strip_dir) \
	  echo " rm -f '$(DESTDIR)$(docdir)/$$f'"; \
	  rm -f "$(DESTDIR)$(docdir)/$$f"; \
	done

# This directory's subdirectories are mostly independent; you can cd
# into them and run `make' without going through this Makefile.
# To change the values of `make' variables: instead of editing Makefiles,
# (1) if the variable is set in `config.status', edit `config.status'
#     (which will cause the Makefiles to be regenerated when you run `make');
# (2) otherwise, pass the desired values on the `make' command line.
$(RECURSIVE_TARGETS):
	@failcom='exit 1'; \
	for f in x $$MAKEFLAGS; do \
	  case $$f in \
	    *=* | --[!k]*);; \
	    *k*) failcom='fail=yes';; \
	  esac; \
	done; \
	dot_seen=no; \
	target=`echo $@ | sed s/-recursive//`; \
	list='$(SUBDIRS)'; for subdir in $$list; do \
	  echo "Making $$target in $$subdir"; \
	  if test "$$subdir" = "."; then \
	    dot_seen=yes; \
	    local_target="$$target-am"; \
	  else \
	    local_target="$$target"; \
	  fi; \
	  (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
	  || eval $$failcom; \
	done; \
	if test "$$dot_seen" = "no"; then \
	  $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
	fi; test -z "$$fail"

mostlyclean-recursive clean-recursive distclean-recursive \
maintainer-clean-recursive:
	@failcom='exit 1'; \
	for f in x $$MAKEFLAGS; do \
	  case $$f in \
	    *=* | --[!k]*);; \
	    *k*) failcom='fail=yes';; \
	  esac; \
	done; \
	dot_seen=no; \
	case "$@" in \
	  distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
	  *) list='$(SUBDIRS)' ;; \
	esac; \
	rev=''; for subdir in $$list; do \
	  if test "$$subdir" = "."; then :; else \
	    rev="$$subdir $$rev"; \
	  fi; \
	done; \
	rev="$$rev ."; \
	target=`echo $@ | sed s/-recursive//`; \
	for subdir in $$rev; do \
	  echo "Making $$target in $$subdir"; \
	  if test "$$subdir" = "."; then \
	    local_target="$$target-am"; \
	  else \
	    local_target="$$target"; \
	  fi; \
	  (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
	  || eval $$failcom; \
	done && test -z "$$fail"
tags-recursive:
	list='$(SUBDIRS)'; for subdir in $$list; do \
	  test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
	done
ctags-recursive:
	list='$(SUBDIRS)'; for subdir in $$list; do \
	  test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
	done

ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
	list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
	unique=`for i in $$list; do \
	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
	  done | \
	  $(AWK) '    { files[$$0] = 1; } \
	       END { for (i in files) print i; }'`; \
	mkid -fID $$unique
tags: TAGS

TAGS: tags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
		$(TAGS_FILES) $(LISP)
	tags=; \
	here=`pwd`; \
	if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
	  include_option=--etags-include; \
	  empty_fix=.; \
	else \
	  include_option=--include; \
	  empty_fix=; \
	fi; \
	list='$(SUBDIRS)'; for subdir in $$list; do \
	  if test "$$subdir" = .; then :; else \
	    test ! -f $$subdir/TAGS || \
	      tags="$$tags $$include_option=$$here/$$subdir/TAGS"; \
	  fi; \
	done; \
	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
	unique=`for i in $$list; do \
	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
	  done | \
	  $(AWK) '    { files[$$0] = 1; } \
	       END { for (i in files) print i; }'`; \
	if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
	  test -n "$$unique" || unique=$$empty_fix; \
	  $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
	    $$tags $$unique; \
	fi
ctags: CTAGS
CTAGS: ctags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
		$(TAGS_FILES) $(LISP)
	tags=; \
	here=`pwd`; \
	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
	unique=`for i in $$list; do \
	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
	  done | \
	  $(AWK) '    { files[$$0] = 1; } \
	       END { for (i in files) print i; }'`; \
	test -z "$(CTAGS_ARGS)$$tags$$unique" \
	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
	     $$tags $$unique

GTAGS:
	here=`$(am__cd) $(top_builddir) && pwd` \
	  && cd $(top_srcdir) \
	  && gtags -i $(GTAGS_ARGS) $$here

distclean-tags:
	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags

distdir: $(DISTFILES)
	@srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \
	list='$(DISTFILES)'; for file in $$list; do \
	  case $$file in \
	    $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
	    $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \
	  esac; \
	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
	  dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
	  if test "$$dir" != "$$file" && test "$$dir" != "."; then \
	    dir="/$$dir"; \
	    $(mkdir_p) "$(distdir)$$dir"; \
	  else \
	    dir=''; \
	  fi; \
	  if test -d $$d/$$file; then \
	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
	      cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
	    fi; \
	    cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
	  else \
	    test -f $(distdir)/$$file \
	    || cp -p $$d/$$file $(distdir)/$$file \
	    || exit 1; \
	  fi; \
	done
	list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
	  if test "$$subdir" = .; then :; else \
	    test -d "$(distdir)/$$subdir" \
	    || $(mkdir_p) "$(distdir)/$$subdir" \
	    || exit 1; \
	    distdir=`$(am__cd) $(distdir) && pwd`; \
	    top_distdir=`$(am__cd) $(top_distdir) && pwd`; \
	    (cd $$subdir && \
	      $(MAKE) $(AM_MAKEFLAGS) \
	        top_distdir="$$top_distdir" \
	        distdir="$$distdir/$$subdir" \
	        distdir) \
	      || exit 1; \
	  fi; \
	done
	$(MAKE) $(AM_MAKEFLAGS) \
	  top_distdir="$(top_distdir)" distdir="$(distdir)" \
	  dist-info
check-am: all-am
check: check-recursive
all-am: Makefile $(INFO_DEPS) $(DATA)
installdirs: installdirs-recursive
installdirs-am:
	for dir in "$(DESTDIR)$(infodir)" "$(DESTDIR)$(docdir)"; do \
	  test -z "$$dir" || $(mkdir_p) "$$dir"; \
	done
install: install-recursive
install-exec: install-exec-recursive
install-data: install-data-recursive
uninstall: uninstall-recursive

install-am: all-am
	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am

installcheck: installcheck-recursive
install-strip:
	$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
	  install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
	  `test -z '$(STRIP)' || \
	    echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
mostlyclean-generic:

clean-generic:

distclean-generic:
	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)

maintainer-clean-generic:
	@echo "This command is intended for maintainers to use"
	@echo "it deletes files that may require special tools to rebuild."
clean: clean-recursive

clean-am: clean-generic mostlyclean-am

distclean: distclean-recursive
	-rm -f Makefile
distclean-am: clean-am distclean-generic distclean-tags

dvi: dvi-recursive

dvi-am: $(DVIS)

html: html-recursive

html-am: $(HTMLS)

info: info-recursive

info-am: $(INFO_DEPS)

install-data-am: install-docDATA install-info-am

install-exec-am:

install-info: install-info-recursive

install-info-am: $(INFO_DEPS)
	@$(NORMAL_INSTALL)
	test -z "$(infodir)" || $(mkdir_p) "$(DESTDIR)$(infodir)"
	@srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
	list='$(INFO_DEPS)'; \
	for file in $$list; do \
	  case $$file in \
	    $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
	  esac; \
	  if test -f $$file; then d=.; else d=$(srcdir); fi; \
	  file_i=`echo "$$file" | sed 's|\.info$$||;s|$$|.i|'`; \
	  for ifile in $$d/$$file $$d/$$file-[0-9] $$d/$$file-[0-9][0-9] \
                       $$d/$$file_i[0-9] $$d/$$file_i[0-9][0-9] ; do \
	    if test -f $$ifile; then \
	      relfile=`echo "$$ifile" | sed 's|^.*/||'`; \
	      echo " $(INSTALL_DATA) '$$ifile' '$(DESTDIR)$(infodir)/$$relfile'"; \
	      $(INSTALL_DATA) "$$ifile" "$(DESTDIR)$(infodir)/$$relfile"; \
	    else : ; fi; \
	  done; \
	done
	@$(POST_INSTALL)
	@if (install-info --version && \
	     install-info --version 2>&1 | sed 1q | grep -i -v debian) >/dev/null 2>&1; then \
	  list='$(INFO_DEPS)'; \
	  for file in $$list; do \
	    relfile=`echo "$$file" | sed 's|^.*/||'`; \
	    echo " install-info --info-dir='$(DESTDIR)$(infodir)' '$(DESTDIR)$(infodir)/$$relfile'";\
	    install-info --info-dir="$(DESTDIR)$(infodir)" "$(DESTDIR)$(infodir)/$$relfile" || :;\
	  done; \
	else : ; fi
install-man:

installcheck-am:

maintainer-clean: maintainer-clean-recursive
	-rm -f Makefile
maintainer-clean-am: distclean-am maintainer-clean-aminfo \
	maintainer-clean-generic

mostlyclean: mostlyclean-recursive

mostlyclean-am: mostlyclean-aminfo mostlyclean-generic

pdf: pdf-recursive

pdf-am: $(PDFS)

ps: ps-recursive

ps-am: $(PSS)

uninstall-am: uninstall-docDATA uninstall-info-am

uninstall-info: uninstall-info-recursive

.PHONY: $(RECURSIVE_TARGETS) CTAGS GTAGS all all-am check check-am \
	clean clean-generic clean-recursive ctags ctags-recursive \
	dist-info distclean distclean-generic distclean-recursive \
	distclean-tags distdir dvi dvi-am html html-am info info-am \
	install install-am install-data install-data-am \
	install-docDATA install-exec install-exec-am install-info \
	install-info-am install-man install-strip installcheck \
	installcheck-am installdirs installdirs-am maintainer-clean \
	maintainer-clean-aminfo maintainer-clean-generic \
	maintainer-clean-recursive mostlyclean mostlyclean-aminfo \
	mostlyclean-generic mostlyclean-recursive pdf pdf-am ps ps-am \
	tags tags-recursive uninstall uninstall-am uninstall-docDATA \
	uninstall-info-am

# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT:
