OESF Portables Forum
General Forums => General Discussion => Topic started by: mimsmall on February 22, 2005, 09:57:32 am
-
Set up a network irda connection on my SL6000L and connected thru my irda modem connection on my Nokia 3660. Did some banking and checked email, then disconnected.
I have not been able to connect since that first time. I have tried on several occassions on different days because the error message is 'Network Offline'.
This seems a bit peculiar. I'm posting on the outside chance someone else has experienced the same problem.
Anybody?
-
Set up a network irda connection on my SL6000L and connected thru my irda modem connection on my Nokia 3660. Did some banking and checked email, then disconnected.
I have not been able to connect since that first time. I have tried on several occassions on different days because the error message is 'Network Offline'.
This seems a bit peculiar. I'm posting on the outside chance someone else has experienced the same problem.
Anybody?
[div align=\"right\"][a href=\"index.php?act=findpost&pid=68183\"][{POST_SNAPBACK}][/a][/div]
I paired my 6600 nokia with Z 5500 via BT and irda and never had any problems with it.
try to delete previous conn settings and make a new one!
It allways works for me
-
Didn't work for me.
-
You could debug your chat script execution by preview of: /home/etc/ppp/connection-errors
If it was finished successfully then debug pppd by:
tail -f /var/log/messages
Of course syslogd must ne ON before of this.
Hope this helps,
suruaZ
-
I am also facing the same problem on my nokia 6610. Seem like the PPP doesn't dial at all. The following is /var/log/messages ... Please help. Thanks.
send (ATQ0V1S100=1^M)
expect (OK)
^M
ATQ0V1S100=1^M^M
ERROR^M
alarm
Failed
abort on (NO CARRIER)
abort on (NO DIALTONE)
abort on (BUSY)
send (at+cgdcont=1,ip,net^M)
expect (OK)
at+cgdcont=1,ip,net^M^M
ERROR^M
SIGTERM
-
send (ATQ0V1S100=1^M)
Why? Just send atz to initialize the modem first
send (at+cgdcont=1,ip,net^M)
expect (OK)
at+cgdcont=1,ip,net^M^M
ERROR^M
SIGTERM
I beleive must be something like at+cgdcont=1,"IP","www.youraccesspoint.com"
suruaZ
-
suruaZ,
In network property, Init commands: ATZ ATQ0V1S100=1, Dial using: Tone
Same error. Not working. Seem the irda port doesn't communicating my mobile phone. Any idea?
-
I managed to get it work. Init commands: ATZ+cgdcont=1
p/s: make sure the handset GPRS setting , GPRS access point = "your access point name"