OESF Portables Forum

Everything Else => General Support and Discussion => Zaurus General Forums => Archived Forums => Accessories => Topic started by: freizugheit on February 24, 2005, 09:14:12 pm

Title: Usb Host Adapter Cf Card
Post by: freizugheit on February 24, 2005, 09:14:12 pm

Has anyone tested the card,
http://www.ratocsystems.com/english/produc...ages/cfu1u.html (http://www.ratocsystems.com/english/products/subpages/cfu1u.html), with SL-5XXX machines?

Title: Usb Host Adapter Cf Card
Post by: DeFKnoL on April 19, 2005, 11:57:25 am

Here is the driver page.  I'ev been looking at this, but it seems so high priced for an adapter.    

http://paipai.org/~humorum/english/zaurus/cfu1-driver.html (http://paipai.org/~humorum/english/zaurus/cfu1-driver.html)

Title: Usb Host Adapter Cf Card
Post by: lardman on April 19, 2005, 05:32:14 pm

I was meant to test this on my 5500 - I'll get on to it in the week (I've been busy - sorry).


Si

Title: Usb Host Adapter Cf Card
Post by: lardman on April 19, 2005, 06:49:02 pm

I appears to work on the 5500. Here's the output of dmesg (and lsmod):

After boot (with card inserted)

root@collie:~# lsmod
Module                  Size  Used by    Tainted: P
sl811_cs                3096   0  (unused)
hc_sl811               13432   0  [sl811_cs]
rfcomm                 33524   0  (autoclean)
l2cap                  17320   2  (autoclean) [rfcomm]
bluez                  32644   0  (autoclean) [rfcomm l2cap]
usbcore                51920   1  [hc_sl811]
sharp_mmcsd_m          25796   1
sa1100_bi              22932   0  (unused)
net_fd                 16652   1
usbdcore               22512   0  [sa1100_bi net_fd]
ipv6                  152348  -1
ipsec                 280016   0  (unused)


After boot (with card inserted)
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
cf_usb0: index 0x04: Vcc 3.3, irq 35, io 0xc4850000-0xc4850007
usb.c: new USB bus registered, assigned bus number 1
hc_sl811.c: USB SL811 at c4850000,c4850001, IRQ 35
hub.c: USB hub found
hub.c: 1 port detected

Then attached a USB mass storage device
cf_usb0: index 0x04: Vcc 3.3, irq 35, io 0xc4850000-0xc4850007
usb.c: new USB bus registered, assigned bus number 1
hc_sl811.c: USB SL811 at c4850000,c4850001, IRQ 35
hub.c: USB hub found
hub.c: 1 port detected
hub.c: USB new device connect on bus1/1, assigned device number 2
usb.c: USB device 2 (vend/prod 0xc76/0x5) is not claimed by any active driver.
root@collie:~#



Then removed said USB mass storage device
usb.c: new USB bus registered, assigned bus number 1
hc_sl811.c: USB SL811 at c4850000,c4850001, IRQ 35
hub.c: USB hub found
hub.c: 1 port detected
hub.c: USB new device connect on bus1/1, assigned device number 2
usb.c: USB device 2 (vend/prod 0xc76/0x5) is not claimed by any active driver.
usb.c: USB disconnect on device 2
root@collie:~#

Looks okay to me.


Si

Title: Usb Host Adapter Cf Card
Post by: ltrm on April 20, 2005, 07:08:49 am

Si

Where did you get your Ratoc card?  I've been thinking about importing one to the UK but I'm not sure about the cost.

ltrm

Title: Usb Host Adapter Cf Card
Post by: lardman on April 29, 2005, 01:20:22 pm

One of the US computer dealers who were willing to ship to the UK.

I can't remember the name off the top of my head, but I can look on the invoice at home if you want.


Si

Title: Usb Host Adapter Cf Card
Post by: yzord on April 30, 2005, 09:04:33 am

Before you buy this card for your sl5500, please see my thread:
https://www.oesf.org/forums/index.php?showtopic=11745 (https://www.oesf.org/forums/index.php?showtopic=11745)

It recognizes the card, but nothing works properly!
Yz

Title: Usb Host Adapter Cf Card
Post by: lardman on April 30, 2005, 04:55:51 pm

Hmm, more investigation necessary then.

Let me dig out some kernel modules and I'll try to get something up and running on my collie.


Si