OESF Portables Forum
Everything Else => General Support and Discussion => Zaurus General Forums => Archived Forums => Hardware Mods => Topic started by: soycap on January 19, 2004, 12:24:07 am
-
[img]http://www.tekprosystems.com/images/zaurus/mod2sm.jpg\" border=\"0\" class=\"linked-image\" /]
[img]http://www.tekprosystems.com/images/zaurus/mod5sm.jpg\" border=\"0\" class=\"linked-image\" /]
http://www.tekprosystems.com/zaurus/mod.htm (http://www.tekprosystems.com/zaurus/mod.htm)
Sorry about the horrible picture quaility.
-
One of the biggest complaints about the 5x00 that I had (and I am sure many of you had) was the fact that they thumboard just didn\'t play nice in the dark. VERY cool mod!
-
That /is/ really cool, but may I ask why you used incandescent bulbs instead of LED\'s? The power draw from LED\'s would be significantly less than from incandescents, not to mention the heat thrown off would be far less.
-
Nice,
Where did you get the power from?
Peter
-
That looks sexy! I\'d make my C760 bright orange but it\'d be too hard to dissasemble.
Let me guess, your digital camera is a Samsung Digimax 800k right? Mine takes pictures just like that one
-
REALLY COOL!!! :shock:
Could you post a bit more info (either here or on your website) about the power connection? I would like to do this using LEDs (to lower the power draw). Again, this is one of the coolest mods I have seen.
V-Man
-
That /is/ really cool, but may I ask why you used incandescent bulbs instead of LED\'s? The power draw from LED\'s would be significantly less than from incandescents, not to mention the heat thrown off would be far less.
Actually, the power draw is about the same. A single high intensity 5V LED runs between 20 mah and 30 mah, these 3 bulbs combine run a total of 30 mah. The main problem with the LEDs, is that I could not find any that had good output that would fit in the Z. These bulbs are super tiny and throw less heat than high output LEDs:
[img]http://www.tekprosystems.com/images/zaurus/mod7sm.jpg\" border=\"0\" class=\"linked-image\" /]
This is a picture of the bulb (to the right) next to a high intensity LED (middle) and a US quater. The bulbs come preattached to positive and negitive leads and not noticible wider than black wires in the picture that are attached to it, which is why it just looks like a black wire in the picture. Trust me, there is a bulb at the end there.
I have seen tiny high output LED kits on Japanese micro RC car websites for ZipZaps and such, but can\'t find them in the US. I have micro red LEDs, but they don\'t kick enough light. If anyone knows where I can a super small, high output white or blue LEDs, I would love to hear from them.
Where did you get the power from?
Could you post a bit more info (either here or on your website) about the power connection?
[img]http://www.tekprosystems.com/images/zaurus/mod8sm.jpg\" border=\"0\" class=\"linked-image\" /]
This is a diagram as to how it was wired. The circuit is closed when the keyboard is slid down and the 2 contacts on the side are crossed by the metal bar in the inside of the slide rail. No wires or switches are exposed, everything except the tips of the bulbs are internal. Since I could not find a good place to locate an override switch, the lights turn on everytime the keyboard is slid down. It would be better to be able to easily turn it off, but I was just happy when it worked once everything was back together.
-
Crappy fuzzy daylight picture:
[img]http://www.tekprosystems.com/images/zaurus/mod6sm.jpg\" border=\"0\" class=\"linked-image\" /]
-
last 2 posts were me.
sorry about that,
soycap
-
That is so awesome!! I definitely have to do that.
-
Great idea!
I\'ll try to do that myself
http://www.dworniak.4web.pl/light.jpg (http://www.dworniak.4web.pl/light.jpg) <--- my 5500
-
*bump*
Has anyone ever tried this on a 6000?
p.s., can moderators please move this to Hardware forum?