OESF Portables Forum
Everything Else => Zaurus Distro Support and Discussion => Distros, Development, and Model Specific Forums => Archived Forums => Angstrom & OpenZaurus => Topic started by: chrismcnally on July 06, 2005, 10:18:22 pm
-
Hi all,
I tried to Flash Open Zaurus on my 5500 using a CF card that I formatted. Thinking that was needed, since nothing happened when i tried to flash without formatting the CF. So after formatting and copying the zImage and initrd.bin, the two lights stay on for about 3 minutes, when they go off the Z will not turn on. I did the reset, put the button back in Normal operation etc. I can reflash and get the same lights for 3 minutes. Any ideas on getting the Z to turn on?
Perhaps instead I need a new CF card that I won't format and try to flash again. anyone want to sell me such a CF?
-
Sounds okay, sometimes with my collie it takes a fair bit of holding the button down (for various random lengths of time, etc.) before it will restart.
Si
-
And, of course, if all else fails, just reflash with the Sharp ROM or some other ROM and see if it works.
-
Got it working..
FYI. I bought a CF reader (my Z was my CF reader) and saw that the zImage file was 0 bytes. recopied the files to the CF using the reader. did the reset C-D and it flashed for only about 2 minutes. hitting the Reset and then power on did not work, but 10 minutes later I it the power button and it did work! Welcome to Opie.
Thanks for the great software and for the support forums.
-
Hi all,
I tried to Flash Open Zaurus on my 5500 using a CF card that I formatted. Thinking that was needed, since nothing happened when i tried to flash without formatting the CF. So after formatting and copying the zImage and initrd.bin, the two lights stay on for about 3 minutes, when they go off the Z will not turn on. I did the reset, put the button back in Normal operation etc. I can reflash and get the same lights for 3 minutes. Any ideas on getting the Z to turn on?
Perhaps instead I need a new CF card that I won't format and try to flash again. anyone want to sell me such a CF?
[div align=\"right\"][a href=\"index.php?act=findpost&pid=87336\"][{POST_SNAPBACK}][/a][/div]
Some people have said that removing the battery and leaving it out all night then putting it back in the next day can revive a Zaurus...I haven't had to do this so maybe someone else could clarify what the procedure is.