OESF Portables Forum
Model Specific Forums => Sharp Zaurus => Zaurus - pdaXrom => Topic started by: sashz on August 04, 2005, 03:34:19 am
-
RC10.4 uploaded to http://mail.pdaxrom.org/rc10/Zaurus-C1000/ (http://mail.pdaxrom.org/rc10/Zaurus-C1000/)
fixed:
- mixer
- CF card
- datentime
- acm module for support Motorola C350/380/650 phones as usb modem
- .....
added:
- logitech quickcam usb module
-
thank you...
thank you...
thank you...
thank you...
thank you...
thank you...
thank you...
thank you...
.......
-
you are my hero.
one problem- i flashed a few days ago to 10.1, and this came out as soon as school started
-
what is the difference between RC10.4 and RC10? just tweats for c-1000?
-
Looking at this thread about OpenOffice (https://www.oesf.org/forums/index.php?showtopic=14089), the glibc on pdaXrom is refered to as glibc2.2.5 on RC10, has it been updated to glibc2.3.2 for this release?
I'm just curious for the whole OpenOffice testing
-
resize the root to 121 mb..... is it ok ?
-
Thank you
-
Have just flashed this new release and as with the previous release, I'm in awe, this is great! :-)
If I could just get OpenOffice on here, I'd never flash back to anything else!
Is the unit meant stay on, even with the screen closed?
-
resize the root to 121 mb..... is it ok ?
[div align=\"right\"][a href=\"index.php?act=findpost&pid=90714\"][{POST_SNAPBACK}][/a][/div]
wait a sec... you can resize partitons in this one?
SWEET!
-
Not resize root partition on this version.
-
1.let SD/CF don't become usbstore-disk.
2.overclock is not work still.
-
The right hand shift key doesn't seem to work
-
Hi,
Great image... this is the first time I've installed a pdaxrom image on my C1000 and it's very impressive. Great work, thanks!
jason
-
sorry to bother you guys but i am having problem installing.
following these directions
1. Extract the 3 files - initrd.bin, tools.tar, updater.sh -
to the root of your FAT16 formated (ext3 will not work) CF or
SD/MMC card and connect the AC adapter to the Zaurus.
2. From a terminal type reboot and press Enter. Now press and
hold the "OK" button on the keyboard. Alternative: You can
remove the battery, reinsert it and power on your Zaurus while
holding down OK key.
3. You should see the Japanese service menu. Select option 4
(flash/update).
4. Here, you have four options (1. USB, 2. CF, 3. SD, 4.
Back). Select CF or SD.
5. Press the button on the left with the "Y" in it.
6. The pdaXrom installer is launched
7. Choose option "Resize root partition"
8. Enter a desired size - like 45 up to 120 depending on your
needs. You have to apply "Fix sharp loader NAND 64MB limit ()"
on the SL-C760, 860 models to choose more than 64. For SL-C700,
750 models 46 seems to be good.
9. Choose "Install new rom". The installation process begins,
it will take some minutes. After the installation is complete,
the system reboots and you will get a login prompt.
10. Login as "root", no password needed.
11. To set a root password (recommended), type passwd after
you logged in.
12. Type startx (because it doesn’t start automatically on
pdaXrom), calibrate the screen.
13. Start the System Tools/Package manager, go to the Settings
tab, remove all feed lines and add the one listed next to your
model in the first section.
14. If you are connected to the Internet, click on the middle
button in the top line to update your feed information from the
new place.
15. Everything is ready, start using pdaXrom!
seriously need to update this.
i spent 3 hours figuring this out and i figured it out.
when it asks to format the internal drive, say yes. reboot after format and now it works.
still buggy but i will report my findings.
excellent and just amazing from what i saw
its very very exquisite
-
I agree, the pdaXrom website seriously needs an update. Are there plans to do this? I'm no web guru, but I've some time next week, I could try and help with a few parts of the content if the website's owners are willing.
But I also agree, pdaXrom as the finished product is awesome on the C1000, to my mind, it may be a small festival of bugs right now, but when it's stable and most of those are fixed, the competition are going to have to produce something special to tempt me away from it.
-
The website is being update as we speak - some parts of it has already been fixer but at the same time we are working on a new site - but we can't seem to find the right CMS.
-
I think something should be done about the lack of support for wifi cards out of the box. I don't know how OpenZaurus does it, but I'm gonna find out.
-
when we install some packages to /mnt/user. and reboot SL-C1000 will lose many package in /mnt/user! sometimes OS is crash!
why?so untable for rc10.1 and rc10.4.....
-
Hi All,
I am still a little unsure here if the new RC10.4 - the latest one for Z C1000 - is OK to put on my C860?
Phill
Edit-
......and for that matter, if there is any benefit to updating to it.
-
The right hand shift key doesn't seem to work
[div align=\"right\"][a href=\"index.php?act=findpost&pid=90829\"][{POST_SNAPBACK}][/a][/div]
You can fix the right-hand shift not working by modifying /etc/sysconfig/keyboard/kernel.map:
Instead of
keycode 103 = Shift
Change the keycode to 112:
keycode 112 = Shift
103 is actually the '.' key, maybe just a typo...?
This is probably only good for the C1k and C3k.
jason
EDIT: fixed the location of the kernel.map file -- thanks scheck.r!
-
The right hand shift key doesn't seem to work
[div align=\"right\"][a href=\"index.php?act=findpost&pid=90829\"][{POST_SNAPBACK}][/a][/div]
You can fix the right-hand shift not working by modifying /etc/sysconfig/kernel.map:
Instead of
keycode 103 = Shift
Change the keycode to 112:
keycode 112 = Shift
103 is actually the '.' key, maybe just a typo...?
This is probably only good for the C1k and C3k.
jason
[div align=\"right\"][a href=\"index.php?act=findpost&pid=91166\"][{POST_SNAPBACK}][/a][/div]
I don't have the file /etc/sysconfig/kernel.map
I am running a c1000 with kathrinrc10.4
Any ideas?
-
The right hand shift key doesn't seem to work
[div align=\"right\"][a href=\"index.php?act=findpost&pid=90829\"][{POST_SNAPBACK}][/a][/div]
You can fix the right-hand shift not working by modifying /etc/sysconfig/kernel.map:
Instead of
keycode 103 = Shift
Change the keycode to 112:
keycode 112 = Shift
103 is actually the '.' key, maybe just a typo...?
This is probably only good for the C1k and C3k.
jason
[div align=\"right\"][a href=\"index.php?act=findpost&pid=91166\"][{POST_SNAPBACK}][/a][/div]
I don't have the file /etc/sysconfig/kernel.map
I am running a c1000 with kathrinrc10.4
Any ideas?
[div align=\"right\"][a href=\"index.php?act=findpost&pid=91171\"][{POST_SNAPBACK}][/a][/div]
try enabling hidden files... or just do
"SciTE /etc/sysconfig/kernel.map"
i'll try it later
-
I don't have the file /etc/sysconfig/kernel.map
I am running a c1000 with kathrinrc10.4
Any ideas?
The kernel.map file is located in /etc/sysconfig/keyboard/kernel.map
Open the file with SciTE or just click on it under ROX filemanager
make the changes jh said
Instead of
keycode 103 = Shift
Change the keycode to 112:
keycode 112 = Shift
Save the file
close SciTE
exit X
startX from the console
and it works
Thanks jh
-
The kernel.map file is located in /etc/sysconfig/keyboard/kernel.map
Ah, yes, that's where it is! Thanks -- I've updated my original post with the correct path.
jason
-
I have problems with the CF Interface: my SMC2642W EZ Connect wireless card doesn't work, and it's confused with either a normal memory flash card or a SANDISK Wireless card. With RC10.1 I had an stable network connection.
I also tried modifying the /etc/pcmcia/hermes.conf and /etc/pcmcia/conf files. I just gave up, and I'll wait for the next release without network connection. I notice the CF interface wasn't very stable, I had a lot of hang-up but without any pattern, I mean I can't report when the bug happens.
I have to say I tried other ROMs and I just don't like them after using pdaXrom.
-
The kernel.map file is located in /etc/sysconfig/keyboard/kernel.map
Ah, yes, that's where it is! Thanks -- I've updated my original post with the correct path.
jason
[div align=\"right\"][a href=\"index.php?act=findpost&pid=91246\"][{POST_SNAPBACK}][/a][/div]
Thanks. I got as far as opening the kernel.map file in SciTE and there are only two keycodes listed.
keycode 89 = Alt
keycode 88 = Control
I added 'keycode 112 = Shift' and tried to save the file but it would not let me save it under the current name. If there is a trick for this, maybe a chmod?, please let me know.
-
Thanks. I got as far as opening the kernel.map file in SciTE and there are only two keycodes listed.
keycode 89 = Alt
keycode 88 = Control
I added 'keycode 112 = Shift' and tried to save the file but it would not let me save it under the current name. If there is a trick for this, maybe a chmod?, please let me know.
[div align=\"right\"][a href=\"index.php?act=findpost&pid=91333\"][{POST_SNAPBACK}][/a][/div]
That doesn't sound like the correct keymap... mine is:
# cat /etc/sysconfig/keyboard/kernel.map
keycode 65 = Tab
alt keycode 65 = Caps_Lock
shift keycode 65 = Caps_Lock
control keycode 65 = Caps_Lock
keycode 27 = Shift
keycode 30 = Alt
keycode 88 = Control
keycode 89 = Alt
keycode 90 = nul
keycode 40 = nul
keycode 121 = nul
keycode 122 = nul
keycode 112 = Shift
The permissions:
-rw-r--r-- 1 root root 273 Aug 8 19:44 /etc/sysconfig/keyboard/kernel.map
If you're logged in as root you should be able to edit that file.
jason
-
Thanks. I got as far as opening the kernel.map file in SciTE and there are only two keycodes listed.
keycode 89 = Alt
keycode 88 = Control
I added 'keycode 112 = Shift' and tried to save the file but it would not let me save it under the current name. If there is a trick for this, maybe a chmod?, please let me know.
[div align=\"right\"][a href=\"index.php?act=findpost&pid=91333\"][{POST_SNAPBACK}][/a][/div]
That doesn't sound like the correct keymap... mine is:
# cat /etc/sysconfig/keyboard/kernel.map
keycode 65 = Tab
    alt   keycode 65 = Caps_Lock
    shift  keycode 65 = Caps_Lock
    control keycode 65 = Caps_Lock
keycode 27 = Shift
keycode 30 = Alt
keycode 88 = Control
keycode 89 = Alt
keycode 90 = nul
keycode 40 = nul
keycode 121 = nul
keycode 122 = nul
keycode 112 = Shift
The permissions:
-rw-r--r--   1 root   root      273 Aug  8 19:44 /etc/sysconfig/keyboard/kernel.map
If you're logged in as root you should be able to edit that file.
jason
[div align=\"right\"][a href=\"index.php?act=findpost&pid=91338\"][{POST_SNAPBACK}][/a][/div]
The date on my kernel. map file is Jan 1 1970 and the permissions are as you listed. I am also logged in as root.
Can I copy the current kernel.map, edit it (with the keycodes you have listed), and save it as kernel1.map then delete the kernel.map and replace with the modified kernel1.map and rename the file back to kernel.map.
-
Can I copy the current kernel.map, edit it (with the keycodes you have listed), and save it as kernel1.map then delete the kernel.map and replace with the modified kernel1.map and rename the file back to kernel.map.
[div align=\"right\"][a href=\"index.php?act=findpost&pid=91370\"][{POST_SNAPBACK}][/a][/div]
Sure, give it a shot.
The other thing to check is that the keys work when you're not in X... there's another layer of indirection added with the .xmodmap files. First thing is to get it going with the kernel map.
Also, the command to load a keymap is 'loadkeys <map-file>" so you could actually just create a kernel1.map file from my example and use the above command to load it.
jason
-
Has anyone gotten the USB networking to work with RC10.4?
I tried the same method as RC10 by using modprobe to load acm, hid, and pxa27x_bi but when I connected my USB cable the system locked up.
No USB0 device was created either.
My windows box did not recognize the Zaurus as the NDIS device and had USB Mass Storage instead.
(yes my Zaurus USB device is set to network, address 192.168.128.201)
-
i'm having the same problem as rgoshko,
ifconfig did no show usb0 ..
i've even manually modprobe pxa27x_bi
Any one.. ?
OZ work fine...
-
me too, usb net doesn't working...
ifconfig shows only lo...
-
usb network and usb storage will available in new rom)
-
usb network and usb storage will available in new rom)
[div align=\"right\"][a href=\"index.php?act=findpost&pid=95066\"][{POST_SNAPBACK}][/a][/div]
Quit teasing us with promises of enhanced features & release it
Looking forward to banging on the new ROM
Cheers,
Jerry
-
Just got my C1000 today and flashed it to this ROM straight away.
Everything seems to be fine for me apart from I can't get the silkscreen buttons to do anything at all.
Great ROM none the less, looking forward to the version that will allow me to use the USB host support.
On the subject of wifi, my LA4100 Spectrum24 wifi card worked out the box.
I am yet to try my bluetooth card however, will report back results.
Sakey
-
Great ROM none the less, looking forward to the version that will allow me to use the USB host support.
Sakey
[div align=\"right\"][a href=\"index.php?act=findpost&pid=95269\"][{POST_SNAPBACK}][/a][/div]
Sakey,
The current RC allows you to use the usb host for a mouse now, but you either have to use pdaXrom with a mouse or touchscreen only, not both at once.
It takes some fiddling with the serverargs line in startx. The procedure is in this thread, I believe.
Bill
-
There test rom for SL-C1000/C3100
http://212.10.30.205/rc10/sashz/test/kathrin-rc11-akita.zip (http://212.10.30.205/rc10/sashz/test/kathrin-rc11-akita.zip)
http://212.10.30.205/rc10/sashz/test/kathr...kita.zip.md5sum (http://212.10.30.205/rc10/sashz/test/kathrin-rc11-akita.zip.md5sum)
Quick changes list:
Menu position problems, menu popup hide/show, xpdf updated, menu scroll up/down fixed, network USB fixed, gtk2 updated, pppd updated, wget updated and many other programs.
please test.
Regarding repartion tool.
Please notice before using them you need to the fix the booloard, because the original Sharp bootloader can't handle more 64 MB.
WARNING: Bootloader fix and repartion is only tested on the C1000 series - C3100 users must have full ROM backup (NAND backup) in order to restore if theres any problems flashing.
-
Bill,
Sorry I have a very bad habbit of being vauge at times with replies...this is one of those times. I was meaning I look forward to being able to use the USB host for USB storage devices, thats the only real use I have for it at the moment.
Other than that....trying new release now
Sakey
-
There test rom for SL-C1000/C3100
http://212.10.30.205/rc10/sashz/test/kathrin-rc11-akita.zip (http://212.10.30.205/rc10/sashz/test/kathrin-rc11-akita.zip)
http://212.10.30.205/rc10/sashz/test/kathr...kita.zip.md5sum (http://212.10.30.205/rc10/sashz/test/kathrin-rc11-akita.zip.md5sum)
Quick changes list:
Menu position problems, menu popup hide/show, xpdf updated, menu scroll up/down fixed, network USB fixed, gtk2 updated, pppd updated, wget updated and many other programs.
please test.
Regarding repartion tool.
Please notice before using them you need to the fix the booloard, because the original Sharp bootloader can't handle more 64 MB.
WARNING: Bootloader fix and repartion is only tested on the C1000 series - C3100 users must have full ROM backup (NAND backup) in order to restore if theres any problems flashing.
[div align=\"right\"][a href=\"index.php?act=findpost&pid=95284\"][{POST_SNAPBACK}][/a][/div]
the usb hd found,
but some bugs @ look and feel,
if I choose the Single color blackground to charge the colour,
the select blackground colour table gone crazy.
it show the black and whrite only....
poor eng...
-
# qclockchange
Segmentation fault
RC11
-
Ok, been running the latest version for a day or so now, and am suitably impressed
I have most programs I want running and most of my hardware (the USB host works perfectly with my flash drive )
Only things I have noticed are:
The Fn+1 and Fn+2 to change the screen size doesn't work (dunno if I have missed something there)
and my Bluetooth card freezes the Zaurus as soon as I plug it in.
They are just small niggles though. Keep up the great work guys
-
for the next ver... will it support mouse??
-
for the next ver... will it support mouse??
[div align=\"right\"][a href=\"index.php?act=findpost&pid=95544\"][{POST_SNAPBACK}][/a][/div]
stay tooned... i'l try it out in a few minutes (when flashing finishes)
-
Ok, now I actually know what the command is
Any chance of xrandr working on the next version
Znester in fullscreen will be nice
-
Ok, now I actually know what the command is
[div align=\"right\"][a href=\"index.php?act=findpost&pid=95638\"][{POST_SNAPBACK}][/a][/div]
Are you talking about the screen sizing commands (Fn+1,Fn+2)? If so, then please do tell.
By the way, rc11 rocks.
-
Ok, now I actually know what the command is
[div align=\"right\"][a href=\"index.php?act=findpost&pid=95638\"][{POST_SNAPBACK}][/a][/div]
Are you talking about the screen sizing commands (Fn+1,Fn+2)? If so, then please do tell.
By the way, rc11 rocks.
[div align=\"right\"][a href=\"index.php?act=findpost&pid=95964\"][{POST_SNAPBACK}][/a][/div]
Yeah, thats exactly what I am talking about.
Not that they matter at the moment due to the SDL problem I am having
But yes RC 11 does indeed rock
-
Ok, now I actually know what the command is
[div align=\"right\"][a href=\"index.php?act=findpost&pid=95638\"][{POST_SNAPBACK}][/a][/div]
Are you talking about the screen sizing commands (Fn+1,Fn+2)? If so, then please do tell.
By the way, rc11 rocks.
[div align=\"right\"][a href=\"index.php?act=findpost&pid=95964\"][{POST_SNAPBACK}][/a][/div]
Yeah, thats exactly what I am talking about.
Not that they matter at the moment due to the SDL problem I am having
But yes RC 11 does indeed rock
[div align=\"right\"][a href=\"index.php?act=findpost&pid=96034\"][{POST_SNAPBACK}][/a][/div]
So what is the command to resize the screen?