OESF Portables Forum
Everything Else => Sharp Zaurus => Model Specific Forums => Distros, Development, and Model Specific Forums => Archived Forums => C1000/3x00 General discussions => Topic started by: bmsleight on August 10, 2005, 05:58:17 pm
-
HI All,
I am trying to get my Nokia Mobile Phone (6680), connected to the zaurus SL-C3000 using a mini-a->B->USB cable to act as a modem.
I have downloaded minicom to help debug on a standard Sharp ROM,on SLC-3000
I have being try to create the dev. But no much luck. The only hint I have is dmesg:
usb.c: register new driver acm
acm.c: v0.21:USB Abstract Control Model driver for USB modems and ISDN adapters.
No detail on which /dev the modem is. Any pointers ?
I have tried to create the device using
mknod /dev/usb/ttyACM0 c 166 0
mknod /dev/ttyACM0 c 166 0
etc, etc, .
cat /proc/bus/usb/devices lists the 6680 but not give much help.
cat /proc/bus/usb/drivers gives:-
usbdevfs
hub
acm
On my normal Debian machine, I can access the Nokia 6680 using minicom using /dev/ttyACM0. Of course dmesg does give the device to use:-
usb.c: USB disconnect on device 00:07.2-1 address 10
hub.c: new USB device 00:07.2-1, assigned address 11
ttyACM0: USB ACM device
Any pointers on what I am doing wrong would be greatly appreciated.
Regards,
Brendan
References:-
http://www.hingston.demon.co.uk/mike/nokia6680.html (http://www.hingston.demon.co.uk/mike/nokia6680.html)
http://www.linux-usb.org/USB-guide/x332.html (http://www.linux-usb.org/USB-guide/x332.html)
http://www.timberwolf.ukfsn.org/debian-orange-3g.html (http://www.timberwolf.ukfsn.org/debian-orange-3g.html)
http://kotinetti.suomi.net/mcfrisk/linux_gprs.html (http://kotinetti.suomi.net/mcfrisk/linux_gprs.html)
http://wiki.splitbrain.org/nokia_6630 (http://wiki.splitbrain.org/nokia_6630)
-
why don't you try a bluetooth connection ?
i've a SLC3000 with a MSI BT usb dongle and Nokia 6630 and it is working just great!
i haven't try to plug the nokia usb cable...
-
why don't you try a bluetooth connection ?
Battery life.