OESF Portables Forum
Everything Else => General Support and Discussion => Zaurus General Forums => Archived Forums => Security and Networking => Topic started by: phisch on August 17, 2005, 02:02:13 pm
-
Hello,
Just picked up an SL-5600 on ebay, my first Linux PDA. I need to be able to use the wireless network where I go to school. They use WPA-PSK and TKIP. I haven't bought a wireless card yet, but what I really need to figure out is if there is a 5600 ROM that that supports this (not real comfortable compiling my own ROM). I see Cacko does, but there is no SL-5600 version of Cacko, is that correct?
I've poked around quite a bit on the forums, but most of the references for WPA I've seen are old or discuss compiling your own ROM.
I'd appreciate any advice on a CF card/ROM combo that will make WPA easy.
Thanks and regards,
-Phil
-
I'd like the same information, for an SL-5500, sort of. I have a Linksys WCF12 wireless card that I'd like to use (if possible) to connect to our campus network. Ohio State's webpage on wireless campus connectivity says: a machine running Linux operating system with an open source client that supports the following should be able to connect to OSUWireless-Network:
* Encryption: WPA Radius with TKIP key exchange
* Authentication: 802.1x with PEAP and MSCHAPv2
* SSID should be set to osuwireless
Is this possible with any ROM, given my hardware? If so, how do I do it?
-
I'd like the same information, for an SL-5500, sort of. I have a Linksys WCF12 wireless card that I'd like to use (if possible) to connect to our campus network. Ohio State's webpage on wireless campus connectivity says: a machine running Linux operating system with an open source client that supports the following should be able to connect to OSUWireless-Network:
* Encryption: WPA Radius with TKIP key exchange
* Authentication: 802.1x with PEAP and MSCHAPv2
* SSID should be set to osuwireless
Is this possible with any ROM, given my hardware? If so, how do I do it?
[div align=\"right\"][a href=\"index.php?act=findpost&pid=98950\"][{POST_SNAPBACK}][/a][/div]
I know that under the SharpROM 3.10 using Qtopia, my D-Link Air card works fine. I have to go under Settings->Network and configure for the wireless connection, but all the items above are listed in those configuration tabs.
You'll have to check with someone else about other ROMs.
-
* Encryption: WPA Radius with TKIP key exchange
* Authentication: 802.1x with PEAP and MSCHAPv2
* SSID should be set to osuwireless
Is this possible with any ROM, given my hardware? If so, how do I do it?
[div align=\"right\"][a href=\"index.php?act=findpost&pid=98950\"][{POST_SNAPBACK}][/a][/div]
I know that under the SharpROM 3.10 using Qtopia, my D-Link Air card works fine. I have to go under Settings->Network and configure for the wireless connection, but all the items above are listed in those configuration tabs.
You'll have to check with someone else about other ROMs.
[div align=\"right\"][a href=\"index.php?act=findpost&pid=98957\"][{POST_SNAPBACK}][/a][/div]
Are you using WPA? That seems to be the hangup.
-
Are you using WPA? That seems to be the hangup.
[div align=\"right\"][a href=\"index.php?act=findpost&pid=98959\"][{POST_SNAPBACK}][/a][/div]
No. I am presently using WEP, as that is all that I see available.