OESF Portables Forum
Model Specific Forums => Sharp Zaurus => Zaurus - pdaXrom => Topic started by: sashz on September 19, 2005, 06:43:10 am
-
SL-C7x0/C860/7500
http://212.10.30.205/rc11/Zaurus-7x0-860/k...-rc11-corgi.zip (http://212.10.30.205/rc11/Zaurus-7x0-860/kathrin-rc11-corgi.zip)
http://212.10.30.205/rc11/Zaurus-7x0-860/k...orgi.zip.md5sum (http://212.10.30.205/rc11/Zaurus-7x0-860/kathrin-rc11-corgi.zip.md5sum)
feed:
http://212.10.30.205/rc11/Zaurus-7x0-860/feed/ (http://212.10.30.205/rc11/Zaurus-7x0-860/feed/)
SL-6000
http://212.10.30.205/rc11/Zaurus-SL6000/ka...n-rc11-tosa.zip (http://212.10.30.205/rc11/Zaurus-SL6000/kathrin-rc11-tosa.zip)
http://212.10.30.205/rc11/Zaurus-SL6000/ka...tosa.zip.md5sum (http://212.10.30.205/rc11/Zaurus-SL6000/kathrin-rc11-tosa.zip.md5sum)
feed:
http://212.10.30.205/rc11/Zaurus-SL6000/feed/ (http://212.10.30.205/rc11/Zaurus-SL6000/feed/)
SL-C1000/C3100
http://212.10.30.205/rc11/Zaurus-C1000-C31...-rc11-akita.zip (http://212.10.30.205/rc11/Zaurus-C1000-C3100/kathrin-rc11-akita.zip)
http://212.10.30.205/rc11/Zaurus-C1000-C31...kita.zip.md5sum (http://212.10.30.205/rc11/Zaurus-C1000-C3100/kathrin-rc11-akita.zip.md5sum)
feed:
http://212.10.30.205/rc11/Zaurus-C1000-C3100/feed/ (http://212.10.30.205/rc11/Zaurus-C1000-C3100/feed/)
Crosscompiler stuff for all PXA Zauruses (x86 Linux host need):
http://212.10.30.205/rc11/Zaurus-7x0-860/c...ftfloat.tar.bz2 (http://212.10.30.205/rc11/Zaurus-7x0-860/cross-sdk-armv5tel-cacko-linux-3.4.4-2.2.5-softfloat.tar.bz2)
http://212.10.30.205/rc11/Zaurus-7x0-860/cross-sdk.md5sum (http://212.10.30.205/rc11/Zaurus-7x0-860/cross-sdk.md5sum)
Native developer tools, cramfs image, for all PXA Zauruses:
http://212.10.30.205/rc11/Zaurus-7x0-860/zgcc-3.4.4.img (http://212.10.30.205/rc11/Zaurus-7x0-860/zgcc-3.4.4.img)
http://212.10.30.205/rc11/Zaurus-7x0-860/z....4.4.img.md5sum (http://212.10.30.205/rc11/Zaurus-7x0-860/zgcc-3.4.4.img.md5sum)
Warning: before install native developer image, please install pcre package.
News:
gcc-3.4.4 compiler (soft-vfp configuration), software/libraries updates, bugfixes, better platform support.
-
Is there readme/faq how to upgrade from rc10?
-
Is there readme/faq how to upgrade from rc10?
[div align=\"right\"][a href=\"index.php?act=findpost&pid=96246\"][{POST_SNAPBACK}][/a][/div]
impossible - too much changes in the libraries, applications, etc
-
Is there readme/faq how to upgrade from rc10?
[div align=\"right\"][a href=\"index.php?act=findpost&pid=96246\"][{POST_SNAPBACK}][/a][/div]
impossible - too much changes in the libraries, applications, etc
[div align=\"right\"][a href=\"index.php?act=findpost&pid=96247\"][{POST_SNAPBACK}][/a][/div]
We all awaiting ChangeLog
-
will try asap for the 6k.
many thanks, feedback to come
-
downloading .....
How can I download all of the feeds ?
With FlashGet ?
-
Changelog... Many things - but fast of the top of my head:
What sash wrote and...
Menu button toggles (http://www.pdaxrom.org/buglist.php?doaction=showbug&bugid=166)
Alarm sound in Kopi (http://www.pdaxrom.org/buglist.php?doaction=showbug&bugid=206)
USB networking fixes (http://www.pdaxrom.org/buglist.php?doaction=showbug&bugid=129)
Rotate fixes
Susend/Resume problems on 6000
http://www.pdaxrom.org/buglist.php?doactio...owbug&bugid=243 (http://www.pdaxrom.org/buglist.php?doaction=showbug&bugid=243)
http://www.pdaxrom.org/buglist.php?doactio...owbug&bugid=276 (http://www.pdaxrom.org/buglist.php?doaction=showbug&bugid=276)
APM and rotate made into scripts in like in buglists (http://www.pdaxrom.org/buglist.php?doaction=showbug&bugid=116)
New and update default programs like Xpdf, gnumeric etc.
Better suspend and resume check with time.
Speedups due to new compiler.
X hanging after long time(http://www.pdaxrom.org/buglist.php?doaction=showbug&bugid=248)
Input config problems (http://www.pdaxrom.org/buglist.php?doaction=showbug&bugid=272)
Gnumeric http://www.pdaxrom.org/buglist.php?doactio...owbug&bugid=273 (http://www.pdaxrom.org/buglist.php?doaction=showbug&bugid=273)
Wifi is update - http://www.pdaxrom.org/buglist.php?doactio...owbug&bugid=277 (http://www.pdaxrom.org/buglist.php?doaction=showbug&bugid=277)
FN key fixed http://www.pdaxrom.org/buglist.php?doactio...owbug&bugid=278 (http://www.pdaxrom.org/buglist.php?doaction=showbug&bugid=278)
http://www.pdaxrom.org/buglist.php?doactio...owbug&bugid=284 (http://www.pdaxrom.org/buglist.php?doaction=showbug&bugid=284)
Font problems: http://www.pdaxrom.org/buglist.php?doactio...owbug&bugid=279 (http://www.pdaxrom.org/buglist.php?doaction=showbug&bugid=279)
3100 support:
http://www.pdaxrom.org/buglist.php?doactio...owbug&bugid=282 (http://www.pdaxrom.org/buglist.php?doaction=showbug&bugid=282)
Mic support in 6000:
http://www.pdaxrom.org/buglist.php?doactio...owbug&bugid=286 (http://www.pdaxrom.org/buglist.php?doaction=showbug&bugid=286)
PPP:
http://www.pdaxrom.org/buglist.php?doactio...owbug&bugid=289 (http://www.pdaxrom.org/buglist.php?doaction=showbug&bugid=289)
CF/SD card suspend resume problems:
http://www.pdaxrom.org/buglist.php?doactio...owbug&bugid=290 (http://www.pdaxrom.org/buglist.php?doaction=showbug&bugid=290)
GIMP should be fixed in next update of feed
http://www.pdaxrom.org/buglist.php?doactio...owbug&bugid=291 (http://www.pdaxrom.org/buglist.php?doaction=showbug&bugid=291)
PLEASE - Don't download the entire feeds to often its hard load for the servers / bandwidth - if you do use rsync so you only get new update files.
Know problems: No easy way to setup built in wireless on the SL6000.
Notice If you find than any of the above bugfixes is not working on your zaurus etc. please post here with zaurus model and problem described.
-
Thanks for a load of bug-fixes/requests - you sorted mine out two days before its anniversary!
Alarm sound in Kopi (http://www.pdaxrom.org/buglist.php?doaction=showbug&bugid=206)
Am I right in thinking that the Z still won't wake up from suspend to sound a Ko/pi alarm? This bug looks like it only applies when the Z is already on.
-
Hi,
1 -- SD On my SL-6000 neither of my SD cards are recognized. I see
nothing in /var/log/messages when inserting one. I even booted
with an SD card in, but it was not mounted. I created a brand new
ext2 filesystem on it (using a laptop) and still had the same problem.
I would suspect everyone else will have this issue, but please
post if you don't...
Hopefully just a small tweak is needed. ???
2 -- SUSPEND The suspend/resume is working great, but there is
still an issue where when you suspend on AC power, the SL-6000
will always stay "charging". In fact, if on AC power and the battery is
fully charged, suspending will cause the charge light to come on.
I always noticed this in rc10.
John
-
Update on SD issue:
"dmesg" reports:
sdcardmgr: SD card inserted!
Hope this update is useful... John
-
Update on SD issue:
"dmesg" reports:
sdcardmgr: SD card inserted!
Hope this update is useful... John
[div align=\"right\"][{POST_SNAPBACK}][/a][/div] (http://index.php?act=findpost&pid=96281\")
SD fix there:
[a href=\"https://www.oesf.org/forums/index.php?showtopic=15074]https://www.oesf.org/forums/index.php?showtopic=15074[/url]
-
I would like to use kdepim in rc11. Only an old korganizer is in the feed. So I tried a more recent version and it complains about not finding libstdc++.so.5 -- so I tried symlinking so.5 which of course didn't work.
-
I would like to use kdepim in rc11. Only an old korganizer is in the feed. So I tried a more recent version and it complains about not finding libstdc++.so.5 -- so I tried symlinking so.5 which of course didn't work.
[div align=\"right\"][a href=\"index.php?act=findpost&pid=96334\"][{POST_SNAPBACK}][/a][/div]
FYI - I've been trying a version of kphone, and it also complained about that
library. I saw I had the file named "libstdcxx_5.0.5_armv5tel.ipk" from an earlier
feed, and I installed that which allows kphone to run. Note that I am able to do
an echo test OK, but have never got the FWD server to hear my name and/or the
pound sign, but I don't know it's related to the C++ lib above.
In any case I would try installing libstdcxx_5.0.5_armv5tel.ipk from the earlier
feed, and see what happens...
John
-
more 6000 bugs:
1) right click doesn't work. on rc10 i had to goto "input setup" -> hold mouse for right click exit x, startx then switch back to "use fn +click" before it worked.. but with rc11 i've tried changing it many times with no luck in getting rightclick to work
2) suspend/time is broken. When i change the time then suspend, when i resume the time gets changes back to the wrong time and my zaurus freezes (i can still move the mouse but nothing works)
-
bug on SL-C1000:
when Network USB is set to Disc Device SD, SD is not recognized by windows XP. If set to CF, CF is recognized well.
EDIT:
USB set as CF worked well only the first time.
Then I set USB to device SD, SD not recognized by XP.
Then I set USB to CF again adn the USB app hangs, no way to suspend nor to insert a CF card, nor to umount it, but the rest is usable(can launch any app), but the inability to suspend forces to hard reset the Z.
-
bug on SL-C1000:
Then I set USB to device SD, SD not recognized by XP.
Then I set USB to CF again adn the USB app hangs, no way to suspend nor to insert a CF card, nor to umount it, but the rest is usable(can launch any app), but the inability to suspend forces to hard reset the Z.
[div align=\"right\"][a href=\"index.php?act=findpost&pid=96339\"][{POST_SNAPBACK}][/a][/div]
I have yet to try out the latest release, but I did encounter the same problem in the earlier RC11 versions. One way that seems to work to me is tapping "Cancel" immediately after "Apply". Dunno if it applies to your case as well.
-
bug on SL-C1000:
Then I set USB to device SD, SD not recognized by XP.
Then I set USB to CF again adn the USB app hangs, no way to suspend nor to insert a CF card, nor to umount it, but the rest is usable(can launch any app), but the inability to suspend forces to hard reset the Z.
[div align=\"right\"][a href=\"index.php?act=findpost&pid=96339\"][{POST_SNAPBACK}][/a][/div]
I have yet to try out the latest release, but I did encounter the same problem in the earlier RC11 versions. One way that seems to work to me is tapping "Cancel" immediately after "Apply". Dunno if it applies to your case as well.
[div align=\"right\"][a href=\"index.php?act=findpost&pid=96340\"][{POST_SNAPBACK}][/a][/div]
disconnect usb cable from Z before change usb mode.
for use usb storage with SD please update usbdconfig from feed - i uploaded new version there.
-
I would like to use kdepim in rc11. Only an old korganizer is in the feed. So I tried a more recent version and it complains about not finding libstdc++.so.5 -- so I tried symlinking so.5 which of course didn't work.
[div align=\"right\"][a href=\"index.php?act=findpost&pid=96334\"][{POST_SNAPBACK}][/a][/div]
FYI - I've been trying a version of kphone, and it also complained about that
library. I saw I had the file named "libstdcxx_5.0.5_armv5tel.ipk" from an earlier
feed, and I installed that which allows kphone to run. Note that I am able to do
an echo test OK, but have never got the FWD server to hear my name and/or the
pound sign, but I don't know it's related to the C++ lib above.
In any case I would try installing libstdcxx_5.0.5_armv5tel.ipk from the earlier
feed, and see what happens...
John
[div align=\"right\"][a href=\"index.php?act=findpost&pid=96337\"][{POST_SNAPBACK}][/a][/div]
Same here. After installing SCIM and use gtk-query-immodules-2.0 > /etc/gtk-2.0/gtk.immodules , it complains that libstdc++.so.5 is missing.
Looking at /usr/lib I see libstdc++.so.5 and libstdc++.so.5.0.7 have been changed to libstdc++.so.6 and libstdc++.so.6.0.3.
I am a very linux newbie and that's how far I can get.
[UPDATE: After installing libstdcxx_5.0.5_armv5tel.ipk from the older feeds and run
gtk-query-immodules-2.0 > /etc/gtk-2.0/gtk.immodules
again, SCIM works fine again. ]
-
Ok
C3100 Feedback
-All partitions of the disk are not mounted at startup, like in the beta, just the first partition (even if the /mnt/ide1,2,3 exist)
-Internal drive is not present in the USB Disk Device list (hda3)
-Just a remark, but the /etc/fstab doesn't seems to be correct with this line, /dev/hda1 /mnt/cf auto...
my cf is /dev/hdc (but the cf is working)
-xrandr doesn't seems to recognize xrandr -s 1
except this, the rom seems to be like the one on my 760, no more no less
for programs from the feed now, i know there are more problems
mplayer 1pre7 doesn't work on my C3100, he complains about a wrong CPU for compilation
other tests for programs will follow
ps is it possible to keep the rom updated like the old ones with ipkg update ipkg upgrade? (just a question before trying tonight )
-
@Sashz,Laze: Could you guys elaborate on what you did to improve the suspend/resume on the 2.4.18? Any patches out there?
-
bug on SL-C1000:
Then I set USB to device SD, SD not recognized by XP.
Then I set USB to CF again adn the USB app hangs, no way to suspend nor to insert a CF card, nor to umount it, but the rest is usable(can launch any app), but the inability to suspend forces to hard reset the Z.
[div align=\"right\"][a href=\"index.php?act=findpost&pid=96339\"][{POST_SNAPBACK}][/a][/div]
I have yet to try out the latest release, but I did encounter the same problem in the earlier RC11 versions. One way that seems to work to me is tapping "Cancel" immediately after "Apply". Dunno if it applies to your case as well.
[div align=\"right\"][a href=\"index.php?act=findpost&pid=96340\"][{POST_SNAPBACK}][/a][/div]
disconnect usb cable from Z before change usb mode.
for use usb storage with SD please update usbdconfig from feed - i uploaded new version there.
[div align=\"right\"][a href=\"index.php?act=findpost&pid=96347\"][{POST_SNAPBACK}][/a][/div]
OK, I upgraded usbdconfig and it fixes the SD bug. (you are so fast sashz !)
But I still have the same problem when switching ti CF.
USB cable disconnected and same result with a CF inserted or not.
Thanks
-
Bug with the Aterm launcher in the panel:
Sometimes it opens a very small window with the title "Unnamed Window" (only visible after maximization). This window shows up always at the top right corner of an already existing window from another app. If I close this small window, the other window of the other app closes also. (I tried with Dillo already opened)
Sometimes nothing happens at all. (I tried with Abiword already opened)
Using the icon on the desktop always works.
-
But I still have the same problem when switching ti CF.
USB cable disconnected and same result with a CF inserted or not.
hmm, i tried, no problem for me... i'll look more
-
Bug with the Aterm launcher in the panel:
Sometimes it opens a very small window with the title "Unnamed Window" (only visible after maximization). This window shows up always at the top right corner of an already existing window from another app. If I close this small window, the other window of the other app closes also. (I tried with Dillo already opened)
Sometimes nothing happens at all. (I tried with Abiword already opened)
Using the icon on the desktop always works.
[div align=\"right\"][a href=\"index.php?act=findpost&pid=96376\"][{POST_SNAPBACK}][/a][/div]
damm, old openbox bug come again ! i will see what problem.
-
gimp-2.2.8 and Basilisk-II uploaded there:
http://212.10.30.205/rc11/Zaurus-7x0-860/feed-addon/ (http://212.10.30.205/rc11/Zaurus-7x0-860/feed-addon/)
-
Hi,
Installed rc11 on my C1k after using rc10 for a while. Getting my system back to where it was I noticed that the nohup binary isn't there anymore? I never really noticed if it was in rc10 or not, but a script I use (keychain for managing ssh keys) is complaining that nohup isn't there.
Can I mount the rc10 image on my linux box to copy it, or was nohup moved to another package?
Thanks!
jason
-
Gnumeric bug while opening a Excel(not recent file).
The numbers displayed are totally wrong(always like 1E-300 or so)
Tried with gnumeric 1.4.2 on XP and Ubuntu with no problem.
Here is the output in the console:
(gnumeric:7447): Gtk-WARNING **: Could not find the icon 'gnome-fs-home'. The 'hicolor' theme
was not found either, perhaps you need to install it.
You can get a copy from:
http://freedesktop.org/Software/icon-theme/releases (http://freedesktop.org/Software/icon-theme/releases)
Reading file:///mnt/card/Documents/GaAs(blue_red_filters).xls
Excel 97 +
** (gnumeric:7447): CRITICAL **: workbook_iteration_tolerance: assertion `tolerance >= 0' failed
-
hm. One little trouble (bug in pdaXrom) with C3100:
if you install packages to /mnt/ide - application doesn't appears anywhere (if you trying to start it from console - you will got error, e.g.: "Couldn't find mozila.run" - it can't locate installed app). If you create symlink ( ln -sf /mnt/ide /mnt/user ) - all will be o.k.
-
Mplayer1.0-pre7 doesn't open .mov file while the previous version (pre5 I think opened it fine). I get this from the console
# mplayer abeandcurtdw.mov
MPlayer 1.0pre7-3.4.4 © 2000-2005 MPlayer Team
for Zaurus 1.1.5 © 2004-2005 AGAWA Koji (atty)
CPU: ARM
CommandLine: 'abeandcurtdw.mov'
Could not access the 'termcap' data base.
Playing abeandcurtdw.mov.
Cache fill: 0.00% (0 bytes) ISO: File Type Major Brand: Original QuickTime
QuickTime/MOV file format detected.
--------------
MOV track #0: 377 chunks, 3451 samples
Audio bits: 16 chans: 2 rate: 44100
Audio extra header: len=91 fcc=0x77617665
MOV: Found MPEG4 audio Elementary Stream Descriptor atom (51)!
Fourcc: mp4a
--------------
MOV track #1: 315 chunks, 1954 samples
MOV: Found unknown movie atom SMI (18)!
Image size: 320 x 240 (24 bpp)
Display size: 320 x 240
Fourcc: SVQ3 Codec: 'Sorenson Video 3'
--------------
MOV: longest streams: A: #0 (3451 samples) V: #1 (1954 samples)
VIDEO: [SVQ3] 320x240 24bpp 0.500 fps 0.0 kbps ( 0.0 kbyte/s)
==========================================================================
Opening audio decoder: [faad] AAC (MPEG2/4 Advanced Audio Coding)
AUDIO: 44100 Hz, 2 ch, s16le, 128.0 kbit/9.07% (ratio: 16000->176400)
Selected audio codec: [faad] afm:faad (FAAD AAC (MPEG2/MPEG4 Audio) decoder)
==========================================================================
vo: X11 running at 640x480 with depth 16 and 16 bpp (":0.0" => local display)
==========================================================================
Opening video decoder: [ffmpeg] FFmpeg's libavcodec codec family
Selected video codec: [ffsvq3] vfm:ffmpeg (FFmpeg Sorenson Video v3 (SVQ3))
==========================================================================
Checking audio filter chain for 44100Hz/2ch/s16le -> 44100Hz/2ch/s16le...
AF_pre: 44100Hz/2ch/s16le
[AO OSS] audio_setup: Can't open audio device /dev/sound/dsp: No such file or directory
[AO ESD] latency: [server: 0.28s, net: 0.00s] (adjust 0.28s)
AO: [esd] 44100Hz 2ch s16le (2 bps)
Building audio filter chain for 44100Hz/2ch/s16le -> 44100Hz/2ch/s16le...
Starting playback...
VDec: vo config request - 320 x 240 (preferred csp: Planar YV12)
VDec: using Planar YV12 as output csp (no 0)
Movie-Aspect is undefined - no prescaling applied.
VO: [x11] 320x240 => 320x240 Planar YV12
No accelerated colorspace conversion found
SwScaler: using unscaled Planar YV12 -> BGR 16-bit special converter
New_Face failed. Maybe the font path is wrong.
Please supply the text font file (~/.mplayer/subfont.ttf).
subtitle font: load_sub_face failed.
A: 0.0 V: 0.0 A-V: 0.020 ct: 0.002 1/ 1 ??% ??% ??,?% 0 0 95%
MPlayer interrupted by signal 4 in module: decode_video
- MPlayer crashed by an 'Illegal Instruction'.
It usually happens when you run it on a CPU different than the one it was
compiled/optimized for.
Verify this!
- MPlayer crashed by bad usage of CPU/FPU/RAM.
Recompile MPlayer with --enable-debug and make a 'gdb' backtrace and
disassembly. Details in DOCS/HTML/en/bugreports_what.html#bugreports_crash.
- MPlayer crashed. This shouldn't happen.
It can be a bug in the MPlayer code _or_ in your drivers _or_ in your
gcc version. If you think it's MPlayer's fault, please read
DOCS/HTML/en/bugreports.html and follow the instructions there. We can't and
won't help unless you provide this information when reporting a possible bug.
#
-
POST EDITED:
If I have the volume control applet in the panel, OSS Mixer doesn't open anymore by tapping on it nor using the command line.
Is it normal ?
-
I'm using a C1000 and it seemed to crash when I changed the clock and that you have to press and hold down function to get at any special characters, rather than press and release and then press the next key.
Other than that, awesome release :-)
-
OK, I've just deleted hrw's post and the numerous responses to his post. I am (as well as many others) getting tired of this crappy behavior from what I would think are respected members of our community.
hrw - your post was thoughtless and disrespectful of the pdaxrom team. They work hard on their project regardless of whether or not you like it. PLEASE JUST LEAVE IT ALONE. We all know that you are an advocate for OZ.
all - constructive conversations are completely acceptable, please just keep in mind a few things:
- don't create a post just to start a flame war
- be respectful of the topic of the thread (start a new thread if your post if off-topic)
- if you're going to start a thread about the the differences of pdaxrom vs. OZ, please do so with a thoughtful/tactful approach
If the tables were reversed I would do the exact same thing. I respect and support both development teams. If anyone sees this crap going on elsewhere, please report it to me and it will be dealt with.
-
I agree offroadgeek - but i was affraid to delete as it would be thought of i was trying to rule... :-)
-
I thought of the Z community as an intelligent group individuals who are daring and versitile. Look at all the z images available. If it was not for the community, i seriously doubt i would see so many images available such as pdaxrom and etc.
Just remember "we are all in the same boat" and want nothing but the best and most usefull: But of course it is a rough road ahead. Nothing is rosie!
I try all the roms as they come out and i use the one that best fits my needs. Hands down to the pdaxrom team in my opinion but I am still waiting for that perfect rc version. I still flash and i really like what i see.
now i am waiting for that new zaurus to come out into the market and i willf lash my old c1000 with pdaxrom. The new zaurus will run the stock sharprom until other rom image bugfixes are done. Can't wait!
-
I wonder what I missed while sleeping
-
I wonder what I missed while sleeping
[div align=\"right\"][a href=\"index.php?act=findpost&pid=96432\"][{POST_SNAPBACK}][/a][/div]
Just the usual "my version of linux is better than yours" stuff. Nothing serious. Hey just a quick question. Can the wifi app that guylhem made for his distro work with pdax? I'd check but after a rm -R * snafu last night I don't have a nand backup of his rom anymore... Luckily it crashed befor it wiped out my sharp rom backup! Thought I was in /mnt/card but was actually in /mnt, oops.
-
After installing Mplayer1.0-pre7 from the feed, OSSmixer doesn't load anymore.
From console:
#mixmos
Cannot open mixer device
[div align=\"right\"][a href=\"index.php?act=findpost&pid=96418\"][{POST_SNAPBACK}][/a][/div]
Mplayer1.0-pre7 has the older XFREE as a dependancy, so It tries to re-install this when you install mplayer. I guess the file with the mixmos bug is in there somewhere?
-
Here is a bug(?) that I first noticed in rc10, and it has carried over into rc11.
I have partitioned a microdrive with a 512Mb swap partition at /dev/hda1 and an ext2 partition at hda2.
My fstab entries look like this:
/dev/hda2 /mnt/cf auto defaults 0 0
/dev/hda1 / swap pri=45 0 0
Now, when I boot up, /dev/hda1 is mounted at /mnt/net
Of course I don't have to set up my partitions this way, but it is never the less a bug. I'll see if I can find the fix and post it for anyone who is interested.
-
i tried installing it on my c3100 and after repartitioning and installing rom (it said Gratulation, you succesfully .....") it asked if i want to format user partition (which i said yes). after doing this it said "Mount root partition ..." and in the left down corner the cursor is blinking but for about 10 minutes nothing happened.
is it normal?
-
Is there readme/faq how to upgrade from rc10?
[div align=\"right\"][a href=\"index.php?act=findpost&pid=96246\"][{POST_SNAPBACK}][/a][/div]
impossible - too much changes in the libraries, applications, etc
[div align=\"right\"][a href=\"index.php?act=findpost&pid=96247\"][{POST_SNAPBACK}][/a][/div]
So we need to reflash the original sharp rom and then the pdaxrom?
Thanks
Roberto Innocenti
-
No new xserver in this release candidate - I speak about ati better acceleration for my 860 - ?
-
When I try to use USB storage with SD (SL-C1000) using pdaXRom RC11 I get lines like this from dmesg on my fedora 4 PC:
Attached scsi removable disk sda at scsi18, channel 0, id 0, lun 0
Vendor: Sharp Model: SL-C1000 Rev: 1.00
Type: Direct-Access ANSI SCSI revision: 00
This is similar to when I use the Sharp ROM to do the same. The difference is, the device sda will mount on my PC when using the Sharp ROM, but with pdaXrom I get "no medium found" when I try to mount it on my PC.
Any ideas? BTW I have upgraded usbdcontrol from the feed and still no result...
Also, in order to come back from suspend, I have to hold in the power button while exiting X then release the button when in the console. then startx again...
-
When reporting bugs always state your zaurus model!!!
robyinno: No need to install Sharp first - just make a clean install with format of user partion. Installer will ask you.
-
I've a problem accessing the internal drive of my 3100
i mount manually my hda3 on /mnt/ide3
no problem with this, but if i suspend the Z or play with cf cards, when i want to access /mnt/ide3/Documents/Datas/ the disk stop responding
he spin, but no more, and the green led (access disk) stay always on
and the directory where he can't read anymore is different each time
it's really strange
i've reflashed by hazard, but no more luck, same problem
i'll try more to find an exact behavior for this error to reproduce this
has any C3100 owner the same problem?
maybe it's my disk who is not perfect
-
I've a problem accessing the internal drive of my 3100
i mount manually my hda3 on /mnt/ide3
no problem with this, but if i suspend the Z or play with cf cards, when i want to access /mnt/ide3/Documents/Datas/ the disk stop responding
he spin, but no more, and the green led (access disk) stay always on
and the directory where he can't read anymore is different each time
it's really strange
i've reflashed by hazard, but no more luck, same problem
i'll try more to find an exact behavior for this error to reproduce this
has any C3100 owner the same problem?
maybe it's my disk who is not perfect
[div align=\"right\"][a href=\"index.php?act=findpost&pid=96514\"][{POST_SNAPBACK}][/a][/div]
maybe repartition hardrive with fdisk to one big partition?
-
But I still have the same problem when switching ti CF.
USB cable disconnected and same result with a CF inserted or not.
hmm, i tried, no problem for me... i'll look more
[div align=\"right\"][a href=\"index.php?act=findpost&pid=96389\"][{POST_SNAPBACK}][/a][/div]
I have the same problem, even after install usbdconfig from feed (SL6000-L)
I have done ipkg install usbdconfig , and the feed is correct .
Another question:
The Gimp that you have updated is even for SL6000 ?
Thanks again
Roberto Innocenti
-
Another question:
The Gimp that you have updated is even for SL6000 ?
Thanks again
Roberto Innocenti
[div align=\"right\"][a href=\"index.php?act=findpost&pid=96520\"][{POST_SNAPBACK}][/a][/div]
yes
-
when r11 for 5500 is coming ? *hopeful*
and if better more programs too ( i need mplayer desperately )
-
I have had similar problems with the microdrive on my C3100.
I started out with hda containing a 128mb swap partiton and one big ext3 partition and made the aproriate entries in /etc/fstab, but the Z ignores them and wants to mount hda1 at /mnt/ide so I repartitioned to one big ext3 partition on the microdrive and let it automount at /mnt/ide. I created a symlink from /home to /mnt/ide/home.
On resume I sometimes could no access my microdrive and had to reboot.
I also have an AMBICOM BT2000C cf card which was working on the sharp rom with tetsu's special kernel but is not working under pdaXrom. In the meantime I have repartioned and flashed back to the sharp rom to analyze the differences in the bluetooth configuration.
I really like pdaXrom! Very responsive and the ability to run X apps without an extra layer is also very cool. I have donated and will again.
-
I've a problem accessing the internal drive of my 3100
i mount manually my hda3 on /mnt/ide3
no problem with this, but if i suspend the Z or play with cf cards, when i want to access /mnt/ide3/Documents/Datas/ the disk stop responding
he spin, but no more, and the green led (access disk) stay always on
and the directory where he can't read anymore is different each time
it's really strange
i've reflashed by hazard, but no more luck, same problem
i'll try more to find an exact behavior for this error to reproduce this
has any C3100 owner the same problem?
maybe it's my disk who is not perfect
[div align=\"right\"][a href=\"index.php?act=findpost&pid=96514\"][{POST_SNAPBACK}][/a][/div]
i had the same problem today... a simple reboot made the microdrive work again like before... i dont know what caused this problem (maybe abiword, firefox, xpdf or mc). i also use a c3100
next problem i have:
xmms starts but doesnt play anything. it says something about esound plugin.
next one:
i am not able to acces cf/sd/hdd with my windows xp pc via usb. when i connect the zaurus with the pc it appears as a drive but i cannot access it (it says that it is not formated and asks if i want to format the drive).
else it is a very nice rom (even that i am new to pdaxrom). i hope that nobody is angry about my comparison but pdaxrom seems to be a bit slower than sharp or cacko rom. i.e. in quake i had about 13fps with pdaxrom and with sharp rom i think i had 20.7fps. and the whole system seems a bit slower (but that could be because of X and the more beautiful textures etc.). what i really miss is a sheet programm (like at least hancom sheet or something like this) and a file browser (ok mc isn't that bad but i.e. treexplorer for sharp and cacko was a bit more comfortable). anyway i think i will stay on pdaxrom (really good work guys)... looking forward for a stable release.
still i have some questions:
* what size for root and user partition is the best choice? now i have 100MB for the root partition... is that ok or should i go for the whole 121 (i think which are available) or should i make half for user and half for root? what is better?
* how to fix xmms to get it playing music and movies?
* where do i get xfce from?
* what file browser, sheet program and pdf reader should i get (i dont like xpdf too much... i liked pdf viewer on sharp more)
* how to connect the zaurus via usb to the pc to get acces to sd/cf or the hdd?
* where's a good documentation of pdaxrom?
* should i use only the applications from the c1000-c3100 feed or is it possible to install apps from oder pdaxrom feeds?
thanks in advance
-
Hi Laze,
Trying to use rsync for feed sync, but got several errors running command ... *grumble* ... I tried to get the rc11 feed for c860 but no luck ...
PLEASE - Don't download the entire feeds to often its hard load for the servers / bandwidth - if you do use rsync so you only get new update files.
[div align=\"right\"][a href=\"index.php?act=findpost&pid=96264\"][{POST_SNAPBACK}][/a][/div]
yes I read the man pages but no I'm out of knowledge :-( any help ... maybe a short command ... would be very nice ...
at the moment I try to get rc11 and install it onmy nice c860 :-)
Thanks
Martin
-
Hi
there is a problem with microdrive and cf-memory:
if you boot without cf-memory inserted, the internal microdrive is /dev/hda and later inserted cf-cards become /dev/hdc.
if you boot with cf-card inserted, it becomes /dev/hda and the microdrive becomes /dev/hdc
So the Kernel seems to confuse the first and second cf-slot.
-
xmms starts but doesnt play anything. it says something about esound plugin.
Try in Xmms:
Options/preferences/Outputplugin/ OSS Driver
instead of esound.
One day it workes that way for me on an older rc
what file browser, sheet program and pdf reader should i get (i dont like xpdf too much... i liked pdf viewer on sharp more)
Try ROX for the filer (combined with Archive), it's a great filer
Also Gnumeric is good as a Sheet program
As for Xpdf, I don't know another one for PdaX
should i use only the applications from the c1000-c3100 feed or is it possible to install apps from oder pdaxrom feeds?
Stick to the feed for the moment, there are lots of changes in this rc (libraries, Xfree, ....)
where do i get xfce from?
There is a thread called XFCE fine tuning in this forum.
-
This might be obvious to other people, but it's bitten me a couple of times:
Running qpkg will reset your ipkg.conf to use the standard feed. So, if you install, say, frozen-bubble, you'll probably pull in some bad dependencies because of the feed. This is how I got the wrong X server running on my C1000 since the dependency was wrong and I think I pulled in an older version of X.
jason
-
This might be obvious to other people, but it's bitten me a couple of times:
Running qpkg will reset your ipkg.conf to use the standard feed. So, if you install, say, frozen-bubble, you'll probably pull in some bad dependencies because of the feed. This is how I got the wrong X server running on my C1000 since the dependency was wrong and I think I pulled in an older version of X.
jason
[div align=\"right\"][a href=\"index.php?act=findpost&pid=96590\"][{POST_SNAPBACK}][/a][/div]
Yeap, same for me when installing mplayer
-
maybe repartition hardrive with fdisk to one big partition?
[div align=\"right\"][a href=\"index.php?act=findpost&pid=96519\"][{POST_SNAPBACK}][/a][/div]
Of Course, this will be better, and i want to make it, but...
if i repartition my hard drive, the sharp rom doesn't boot anymore if i reflash it
on the 3100 you have 3 partitions when shipped.
2 system partitions (ext3) for sharp rom restore and sharp rom booting (he just verify if the 2 system partitions are present at boot, if not, it's the HDD1 error and no boot anymore)
and an user partition (vfat) for datas
we are not responsible of this layout
so if fdisk the drive is mandatory, many users can't test the rom anymore, because of the too difficult rollback
-
The zaurus usb-storage not mounting on fedora 4 systems with rc11 seems to be fixed by upgrading to the latest FC4 kernel (2.6.12-1.1447). Apparently, this new kernel also fixes the usbnet driver that was broken as well but I haven't tested that.
So if you have a sl-c860 or sl-c1000 with pdaxrom, and a pc with fedora 4, download and install the latest fedora 4 kernel and you shouldn't have any problems with usb-storage or usbnet recognising your zaurus.
PdaXrom is awesome. Thanks for a great ROM
-
The zaurus usb-storage not mounting on fedora 4 systems with rc11 seems to be fixed by upgrading to the latest FC4 kernel (2.6.12-1.1447). Apparently, this new kernel also fixes the usbnet driver that was broken as well but I haven't tested that.
So if you have a sl-c860 or sl-c1000 with pdaxrom, and a pc with fedora 4, download and install the latest fedora 4 kernel and you shouldn't have any problems with usb-storage or usbnet recognising your zaurus.
PdaXrom is awesome. Thanks for a great ROM
[div align=\"right\"][a href=\"index.php?act=findpost&pid=96674\"][{POST_SNAPBACK}][/a][/div]
and how to fix it on windows xp?
-
Hi~
Is there have rdaX86 RC11 ?
-
quick 6000L feedback:
much much more quicker, as quick as a guylhem rom or a default sharp rom. great job, for example, abiword takes 3 seconds to open.
put a usb keyboard and some keys are not working but onlew a few, depending of the model of the kb. anyway it has been recognized right away.
vt100 emulator (tipterm.ipk) with serialIO cable works like a charm!
i followed the instructions to modify the files to have the wifi but cant surf!
is there any problem with built in wifi? the wifiup and wifidown script makes the wifi led switch on and off but dillo xft cant see anything and a ping does not respond.
i just want wifi at home with wep key 40 bits on channel 10. and why not a little sniffer for warwalking but its not the first first proirity.
the suspend mode works ok, not the built in key , thats ok, we were adviced.
from time to time, cf is not seen after a resume, have to eject with the icon and to insert it again and wait for 1 minute to see it.
not tested yet: bluetooth through pretec cf card.
last impression, it seems that wifi on pdaxrom eats more battery than wifi on sharp rom.
this is not the case when its off.
hope it helps.
big big "merci" for this rom, for more beautifull than default one.
-
quick 6000L feedback:
...
i just want wifi at home with wep key 40 bits on channel 10. and why not a little sniffer for warwalking but its not the first first proirity.
Hi,
I am using 40bit WEP on rc11 without any problems. I followed the
instructions in the "tutorial for pdaXrom on 6000" thread, to create a wifup
and wifdown script. I then modified the wlancfg-WHATEVER script to
specify the WEP key, and perhaps another mod, I'll have to check later,
for the details.
Did you use the instructions in the "...tutorial for 6000" thread?
John
-
maybe repartition hardrive with fdisk to one big partition?
[div align=\"right\"][a href=\"index.php?act=findpost&pid=96519\"][{POST_SNAPBACK}][/a][/div]
Of Course, this will be better, and i want to make it, but...
if i repartition my hard drive, the sharp rom doesn't boot anymore if i reflash it
on the 3100 you have 3 partitions when shipped.
2 system partitions (ext3) for sharp rom restore and sharp rom booting (he just verify if the 2 system partitions are present at boot, if not, it's the HDD1 error and no boot anymore)
and an user partition (vfat) for datas
we are not responsible of this layout
so if fdisk the drive is mandatory, many users can't test the rom anymore, because of the too difficult rollback
[div align=\"right\"][a href=\"index.php?act=findpost&pid=96637\"][{POST_SNAPBACK}][/a][/div]
actually I just fixed a hdd1 problem, and its pretty easy to roll-back, just takes a little time I currently am hee-haw'ing over testing this, prolly will wait just a smidge longer for some of the hiccups to be worked out.
-
yes i followed the "howto" but i dont know how to and where to change that. are you in dhcp? where to change from dhcp to fixed?
thanks
-
yes i followed the "howto" but i dont know how to and where to change that. are you in dhcp? where to change from dhcp to fixed?
thanks
[div align=\"right\"][a href=\"index.php?act=findpost&pid=96826\"][{POST_SNAPBACK}][/a][/div]
Again, I have not used fixed IPs on the Z yet, keep that in mind.
In the wifup script, the "dhcpcd wlan0" command appears to
do everything I need as far as using DHCP.
In the "wlancfg-a" file (my ESSID is "a") , I have modified 2 lines as follows:
diff wlancfg-DEFAULT wlancfg-a
14c14
< dot11PrivacyInvoked=false # true|false
---
> dot11PrivacyInvoked=true # true|false
26c26
< dot11WEPDefaultKey0= # format: xx:xx:xx:xx:xx or
---
> dot11WEPDefaultKey0=81:29:4b:f2:ac # format: xx:xx:xx:xx:xx or
Make the same modifications, but use your key of course, and also post the
output of "ifconfig wlan0" and "iwconfig wlan0".
John
UPDATE - Oh yeh, doublecheck your edits, as vi seems to act wierd for me in
aterm sometimes, when tabs are encountered. I'm a GNU Emacs user, but until
I get that built and running, I have been trying to learn enough VI to edit the
config files, etc..
-
Use mcedit for editing its easy to use and already there... :-)
-
i'll have a try , thanks for the help, not sure i understood everything but i'l try!
-
On SL-C1000:
If I have the volume control applet in the panel, OSS Mixer doesn't open by tapping on it nor using the command line.
Is it normal behaviour ?
Sorry for my previous posts, I said that OSS mixer didn't load after installing Mplayer or ROX or whatever but now even with nothing installed(fresh flashing) I noticed this behaviour.
Thank you
-
After installing Mplayer1.0-pre7 from the feed, OSSmixer doesn't load anymore.
From console:
#mixmos
Cannot open mixer device
[div align=\"right\"][a href=\"index.php?act=findpost&pid=96418\"][{POST_SNAPBACK}][/a][/div]
Mplayer1.0-pre7 has the older XFREE as a dependancy, so It tries to re-install this when you install mplayer. I guess the file with the mixmos bug is in there somewhere?
[div align=\"right\"][a href=\"index.php?act=findpost&pid=96447\"][{POST_SNAPBACK}][/a][/div]
As I said in the previous post, mplayer is not faulty, it was because I had the volume control applet in the panel and apprently when you have this applet in the panel OSS Mixer doen't open anymore
-
But I still have the same problem when switching ti CF.
USB cable disconnected and same result with a CF inserted or not.
hmm, i tried, no problem for me... i'll look more
[div align=\"right\"][a href=\"index.php?act=findpost&pid=96389\"][{POST_SNAPBACK}][/a][/div]
The rc11 work very good, I must only underline this problem:
With rc10 I have used the zaurs like big usb pen, but from rc11 doesn't working.
With SL6000-L ( rc10 , install rc11, reinstall sharp rom, install rc11, installed new hotplug from sashz)
1) updating usbdconfig
2) ipkg install usbconfig,
3) ipkg remove usbconfig - ipkg install usbdconfig
- until steps 2 I can only see with lsusb ( on my mdk 10.2 and ubuntu 5.10 preview) the SL6000 device without see the usb storage device
- after step 3 i don't see nothing even with lsusb
Please inform us it there is any evolution about this bug and if you need more help on testing.
Thanks you!
Roberto Innocenti
-
anyone else using gaim w/ jabber? my yahoo account works perfectly, but when i try to connect to my jabber server, gaim crashes. (rc11 on akita).
thanks!
ken
-
anyone else using gaim w/ jabber? my yahoo account works perfectly, but when i try to connect to my jabber server, gaim crashes. (rc11 on akita).
thanks!
ken
[div align=\"right\"][a href=\"index.php?act=findpost&pid=97338\"][{POST_SNAPBACK}][/a][/div]
me too. GAIM crash if "Use TLS if available" is checked for Jabber. I found it since RC9.
Jacky
-
When rc11 builder will be available?
-
anyone else using gaim w/ jabber? my yahoo account works perfectly, but when i try to connect to my jabber server, gaim crashes. (rc11 on akita).
thanks!
ken
[div align=\"right\"][a href=\"index.php?act=findpost&pid=97338\"][{POST_SNAPBACK}][/a][/div]
me too. GAIM crash if "Use TLS if available" is checked for Jabber. I found it since RC9.
Jacky
[div align=\"right\"][a href=\"index.php?act=findpost&pid=97356\"][{POST_SNAPBACK}][/a][/div]
awesome... thanks!
ken
-
I am trying to flash RC11 from RC9. However, the screen goes blank after I confimed
that I want to reflash. (So, I enter <4.>, then <2. CF> and then choose <Y>, and after
that the screen is blank and I never went beyond that.) I tried different CF cards, but
the problem is always the same.
Any suggestions?
-- Marcus
-
FYI - I've been trying a version of kphone, and it also complained about that
library. I saw I had the file named "libstdcxx_5.0.5_armv5tel.ipk" from an earlier
feed, and I installed that which allows kphone to run. Note that I am able to do
an echo test OK, but have never got the FWD server to hear my name and/or the
pound sign, but I don't know it's related to the C++ lib above.
In any case I would try installing libstdcxx_5.0.5_armv5tel.ipk from the earlier
feed, and see what happens...
John
[div align=\"right\"][a href=\"index.php?act=findpost&pid=96337\"][{POST_SNAPBACK}][/a][/div]
Hi John,
which version oh kphone have you tried? Kphone-pi? I tried the one on the unstable feed, Install seems fine and Kphone icon appears on desktop but it doesn't work and in shell I can't find the executable to try launch by command line!
Thanks...
Max
-
I am trying to flash RC11 from RC9. However, the screen goes blank after I confimed
that I want to reflash.
Well, the problem isn't skipping RC10, since I also flashed directly from RC9 to RC11 and I had no problems. Are you sure the downloaded file was OK?
-
Just recently upgraded to RC11 and I've got 2 problems.
I don't seem to have the ide_cs module. When I insert a cf card I get
module /lib/modules/2.4.18-rmk7-pxa3-embedix/pcmcia/ide_cs.o not available
in /var/log/messages.
Have I done something stupid? I can't believe no-one else has noticed this :-)
I think that aterm is not sending control sequences properly. When I try to run vim or mutt (locally or remotely) I see things like [?1;2[?1;2[?1;2[?1;2cccc and have to kill it because it isn't accepting key presses. Is this a termcap issue?
Other than that. This RC is looking really good!
-
I am trying to flash RC11 from RC9. However, the screen goes blank after I confimed
that I want to reflash.
Well, the problem isn't skipping RC10, since I also flashed directly from RC9 to RC11 and I had no problems. Are you sure the downloaded file was OK?
[div align=\"right\"][a href=\"index.php?act=findpost&pid=97798\"][{POST_SNAPBACK}][/a][/div]
Well, I unzipped twice and the files were the same (I checked) and tried different cards,
even the SD. No difference.
-- Marcus
-
My take on testing the RC11:
I am unable to rotate the screen from a (newly created) user account -- I do not like logging-in as root -- this used to work in RC10?
Also, I am not sure where should I change the permissions/use sudo so that the screen would blanken in a user account when closing the lid?
I just want to make sure smbd has not yet resolved the above issues before I file appropriate bug/feature requests.
-
I'm second to request screen rotation fixed for non-root users.
-albertr
-
also vncviewer from the unstable feed no longer works with RC 11 on my SL-C1000. It worked perfectly before. Anyone else have this problem?
-
also vncviewer from the unstable feed no longer works with RC 11 on my SL-C1000. It worked perfectly before. Anyone else have this problem?
[div align=\"right\"][a href=\"index.php?act=findpost&pid=98150\"][{POST_SNAPBACK}][/a][/div]
Hello,
Vncviewer still works for me using RC11 and 860.
Regards,
Fabian
-
thanks for chiming in Fabian. Good to hear that it is still working for your Zaurus model. Anyone else?
-
Vncviewer works on my C1000 with rc11. I'm using the sash's patched xserver, as well (allows mouse & touchscreen).
jason
-
It works also for me on a C1000 with rc11 with new xserver from sashz.
-
It works also for me on a C1000 with rc11 with new xserver from sashz.
[div align=\"right\"][a href=\"index.php?act=findpost&pid=98173\"][{POST_SNAPBACK}][/a][/div]
Will the new xserver be built into a the next full release or RC12?
-
Yes the latest Xserver stuff will be intergrated into the next RC :-)
-
I haven't had much feedback yet. Basically, I can flash neither to RC10 nor to
RC11. After the first three steps (select option 4, then CF and then hit "Y"
to accept, the screen goes blank. The only recovery is to unplug and restart
pdaXrom. I am using RC9 which otherwise works fine. The only problem is
I haven't been able to use the "make" utilities without any serious errors. I
might stay with it if it wasn't for the fact that I cannot not compile new software.
Now, is there a limit on how many times one can flash or what else could cause
such a behaviour? Any experiences?
-- Marcus
pdaXrom 1.1.0 RC9 on
Zaurus C860
-
Marcus there must be something wrong with the download or the cards - please check once again - several people are running the rc on the 860
-
I don't seem to have the ide_cs module. When I insert a cf card I get
module /lib/modules/2.4.18-rmk7-pxa3-embedix/pcmcia/ide_cs.o not available
in /var/log/messages.
Have I done something stupid? I can't believe no-one else has noticed this :-)
I think that aterm is not sending control sequences properly. When I try to run vim or mutt (locally or remotely) I see things like [?1;2[?1;2[?1;2[?1;2cccc and have to kill it because it isn't accepting key presses. Is this a termcap issue?
[div align=\"right\"][a href=\"index.php?act=findpost&pid=97989\"][{POST_SNAPBACK}][/a][/div]
Answering my own message ....
The aterm problem does seem to be TERM related. It seems to default to a TERM of linux. When I change it to builtin_ansi, it works well. Did the handling of termcap change with this RC? I notice that my backup of /etc from RC10 didn't have an /etc/termcap. Anyway, working now.
Since no-one else seems to have the ide_cs module problem, can someone just send it to me and I'll drop it in and see if it works like that, without my having to reflash.
Thanks,
-
There's no need in a new ide-cs module. I believe sometime along the way, the module name was changed from ide_cs to ide-cs. But you still seem to be using old pcmcia config files which were not updated to reflect name change. Just grep for "ide_cs" in /etc/pcmcia/ and replace it with "ide-cs".
-albertr
-
There's no need in a new ide-cs module. I believe sometime along the way, the module name was changed from ide_cs to ide-cs. But you still seem to be using old pcmcia config files which were not updated to reflect name change. Just grep for "ide_cs" in /etc/pcmcia/ and replace it with "ide-cs".
-albertr
[div align=\"right\"][a href=\"index.php?act=findpost&pid=98406\"][{POST_SNAPBACK}][/a][/div]
Cheers albertr. That did the trick. I copied /etc/pcmcia/config across when I upgraded from RC10 because of my wi-fi card definition. I've edited config now for ide_cs and it works.
Thanks
-
or you can add patch to kernel which will rename ide-cs to ide_cs like we did in OZ kernels.
-
Greets..
I have a 6000L. One thing I have noticed is that eventually, I can suspend the ROM and when I attempt to resume, the system becomes available, but it's as if the interface isn't responding. I mean, I can move my mouse around the screen, but it does not allow me to click anything. The keypad will not allow input either. I noticed that the time and date reset as well, even after I have reset it. I read about loading up embedix-utils, but those are already on my system. I'm able to continue to SSH into the system, but I thought I would bring it to someone's attention. I am using the Matchbox display manager as well. This is for ROM RC11. It does look really good, however.
If I kill the xterm that was open from a remote SSH session, that changed the cursor to looking regular, but I was still unable to make any input. I would also like to add that I had modified the system's clock at some point as well before suspending.
Haz
-
This is a long-standing problem covering all models, which is discussed in places like here (https://www.oesf.org/forums/index.php?showtopic=15483). I think it would be really useful if it could be fixed, because it does the ROM no favours at all.
-
Regarding VNCviewer - when I attempt to execute it, I get
"error while loading shared libraries: libstdc++.so.5: cannot open shared object file: No such file or directory"
FINDing from root confirms that this file is not present in my filesystem.
I'm running RC11 on a C860.
-
"I think it would be really useful if it could be fixed, because it does the ROM no favours at all."
For the sl-6000 especially this is a critical issue. With the clamshell, the workaround is to set the time, exit to console and suspend using the power button. Since power button suspend does not work on the 6000, there is no way to live with X that I have discovered. The inability to keep the time set and resume from a suspend in X has forced me to temporarily abandon pdaxrom on the sl-6000.
Has anyone come up with a work-around or solution?
-
Well as for the time thing, somewhere in this forum it tells you how to fix it. You have to reinstall a package, Im sorry I dont remember what it was. It had to do with setting the hardware clock (hwclock binary). The script from the new install calls a file that is not installed. Sorry i wish i could remember the package name. As for resume, I have had no problems with suspend/resume, with the exception of alarms. There is a thread here that has a fix for alarms and kopi that seems to work on everything but the 6000. Im hoping to see an RC 12 test for the 6000 soon, and hoping even more that it fixes both of these issues. Then I can make pdaxrom my daily rom.
Todd
again thanks pdaxrom for your effort!
-
Hmm, rc11 supports 1000 and 3100, but no 3000 ?
Is it because nobody has actually tried it yet, or is
there anything more fundamental wrong with it ?
- Werner
-
I'm guessing because 1000 and 3100 both have 128 internal flash, and 3000 has only 64
-
and 3000 has only 64
16 MB, actually. Hmm, I thought pdaXrom already supported split
storage (or plain disk) installation. So it doesn't ?
It's a pity that we're still stuck at 2.4. If a 2.6 kernel would run
usefully on the 3000, I could just port kboot, run everything off
the disk, and never worry about the Flash again.
- Werner
-
Well as for the time thing, somewhere in this forum it tells you how to fix it. You have to reinstall a package, Im sorry I dont remember what it was. It had to do with setting the hardware clock (hwclock binary). The script from the new install calls a file that is not installed. Sorry i wish i could remember the package name. As for resume, I have had no problems with suspend/resume, with the exception of alarms. There is a thread here that has a fix for alarms and kopi that seems to work on everything but the 6000. Im hoping to see an RC 12 test for the 6000 soon, and hoping even more that it fixes both of these issues. Then I can make pdaxrom my daily rom.
Todd
again thanks pdaxrom for your effort!
[div align=\"right\"][a href=\"index.php?act=findpost&pid=100112\"][{POST_SNAPBACK}][/a][/div]
I believe the package you are refering to is embedix-utils
ipkg install embedix-utils
this fixes the missing hwclock problem.