OESF Portables Forum
General Forums => For Sale / Wanted => Topic started by: glompos21 on September 20, 2005, 04:50:08 am
-
I am selling a c760.It has some minor wear.It hasn't got any sound.The screen is in perfect condition with screen protector.I have got all the original cd,original charger+ 240Volt charger,wifi card,a dvd with programms etc.
I would like Euro 170+shipping.
I am living in greece.
-
edit
-
edit
[div align=\"right\"][a href=\"index.php?act=findpost&pid=96634\"][{POST_SNAPBACK}][/a][/div]
Hi, I live in Italy.
Are you still trying to sell your pda?
Max
-
wanna sell just the wifi card?
-
UpDate
-
UPDATE
-
edit
-
edit
-
still selling this?
-
Yes Still Selling
-
I live in Italy and I'd buy the whole lot.
You can contact me via email and we can settle the details.
Regards
David
-
I recieved the device but it's accusing other problems that you did not mention:
The io port seems broken and has some pins in short,
The case looks like it has been opened for non certified servicing (you can see where someone sticked a screwdriver to lever the case open),
The device fails to go into the flash utility (ok + power + on after battery replacement),
After the attempt to reflash the device (because it never went ito the flash menu) it is now failing to boot anything at all,
It also fails to go into the service menu (D+M),
The power led fails to light when connected to any power source (3 different wall chargers and usb charg/sync cable).
glompos21 ... I'm pretty mad at you !!!!
Besides this has anyone any advice in order to get the thing working again ?
-
First, try to change or short the fuses as explained on the hardware forum.
Regarding the case or IO port - can't help
guylhem
-
guylhem : I don't think it's a fuse issue ... but thanks anyway for the attention.
I found somewhere on this forum a description that got my Z to go into service menu (all other descriptions failed on my device):
Take out the batery and leave it out,
Take at least a 5 second pause,
Press and keep holding D and M keys on keypoard,
Push in the power chord while pressing the keys,
Let the keys go and wait a few seconds the service menu should come up shortly,
Put the battery back in close cover and lock.
I then attempted to restor original nand flash backup that can be downloaded from
http://trisoft.de/en_slc760.htm (http://trisoft.de/en_slc760.htm)
But after having nand flash restored the device it still fails to boot.
I restarted the service menu to do a flash cksum only to finf out that :
ROFLSYS is in state NG
PRESET is in state NG
Anyone have any ideas how to fix this ?
-
that's a faulty nand. Sorry, there are no solution except replacing the flash :-/
-
Who would be able to do that and how much would it cost ?
Is there any other possible solution and/or workaound ?
glompos21 : I think it would be correct on your behalf to refund me.
-
Ok so I have a guy selling me a c760 with a faulty nand without having warned me or having got proken while shipping.
I've been asking the guy to tell me what is the procedure for an insurance refund but the only answer I'm getting is that the c760 is good.
What can I do ?
-
I've managed to get it partially working by installing u-boot loader by following this procedure:
http://mail.pdaxrom.org/node/102 (http://mail.pdaxrom.org/node/102)
Just incase it gets lost or broken links ... etc
here are the most importat steps:
First installation - new bootloader
1) Good idea make NAND backup before
2) Format CF or SD card (MMC unworking for me) with FAT16
3) Extract bootloader and emergency files to card. There must be updater.pro, u-boot.bin, emergenc.img
4) Extract rootfs and kernel files to this or another CF or SD card, there must be: rootfs.img kernel.img autoboot.sh
5) Run diagnostic menu (D+M) and run NAND Flash Erase from Extra Menu.
6) Turn OFF your zaurus. Unplug power adapter, eject battery.
7) Insert SD or CF card with extarcted files (if you insert both CF and SD, updating fails)
8) Press and hold "C" and "D" keys and plug power adapter (battery must be ejected!).
9) Green LED must light on for ~20 sec.
10) If both LEDs flashing, that mean bad CF or SD, or non FAT16.
11) When Green LED off, unplug power adaptor.
Bootup emergency system
1) Insert SD or CF card with pdaXrom
2) Press and hold OK button and plug power cable
3) Wait for 10 sec and leave OK button
4) Screen on and emergency system will booting
5) After booting, it will detect SD or CF card and run autoboot.sh script
7) After flashing, it will reboot and pdaXrom will booting - time for battery insert:)