OESF Portables Forum
Everything Else => Zaurus Distro Support and Discussion => Distros, Development, and Model Specific Forums => Archived Forums => OpenBSD => Topic started by: kojiro on September 25, 2005, 04:47:43 am
-
I've just installed OpenBSD on my SL-C3000 and tried to boot it.
And zboot says me "loaded 2894717 bytes" and system halts. What could it be?
And i'm using latest OpenBSD snapshot (09/22/05).
-
This is a guess - maybe barryg or someone else has the actual answer. Try downloading zboot again (in case it got corrupted) and boot it again.
-
Good Day!
I've just installed OpenBSD on my SL-C3000 and tried to boot it.
And zboot says me "loaded 2894717 bytes" and system halts. What could it be?
And i'm using latest OpenBSD snapshot (09/22/05).
[div align=\"right\"][a href=\"index.php?act=findpost&pid=96948\"][{POST_SNAPBACK}][/a][/div]
Please provide more info.
A.) How did you install the boot loader(zboot, bsdmod.o, etc)? Did you install
through .ipk or manuall copied it?
B.) How did you partition your disk? Please provide dmesg, fdisk and disklabel
output.
There are previous posts and threads here regarding getting those info.
I think you have a corrupted boot loader, kernel and/or improperly partitioned
disk, but need additional info to diagnose and provide relevant solutions.
Mabuhay! barryg
--
Barry Dexter A. Gonzaga, bofh
-
Good day!
I've just installed OpenBSD on my SL-C3000 and tried to boot it.
And zboot says me "loaded 2894717 bytes" and system halts. What could it be?
And i'm using latest OpenBSD snapshot (09/22/05).
[div align=\"right\"][a href=\"index.php?act=findpost&pid=96948\"][{POST_SNAPBACK}][/a][/div]
Please provide more info.
A.) How did you install the boot loader(zboot, bsdmod.o, etc)? Did you install
through .ipk or manuall copied it?
I've used openbsd38_arm.ipk from latest OpenBSD/zaurus snapshot.
B.) How did you partition your disk? Please provide dmesg, fdisk and disklabel
output.
Here they go:
dmesg:OpenBSD 3.8-current (RAMDISK) #90: Thu Sep 22 00:10:59 MDT 2005
deraadt@zaurus.openbsd.org:/usr/src/sys/arch/zaurus/compile/RAMDISK
real mem = 67108864 (65536K)
avail mem = 52084736 (50864K)
using 844 buffers containing 3457024 bytes (3376K) of memory
mainbus0 (root)
cpu0 at mainbus0: PXA27x rev 4 (XScale core)
cpu0: DC enabled IC enabled WB enabled LABT branch prediction enabled
cpu0: 32KB(32b/l,32way) I-cache, 32KB(32b/l,32way) wr-back-lock D-cache
pxaip0 at mainbus0: CPU clock = 416.001 MHz
pxaintc0 at pxaip0 addr 0x40d00000: Interrupt Controller
pxagpio0 at pxaip0 addr 0x40e00000: GPIO Controller
saost0 at pxaip0 addr 0x40a00000
saost0: SA-11x0 OS Timer
com0 at pxaip0 addr 0x40100000 intr 22: pxa2x0, 32 byte fifo
com1 at pxaip0 addr 0x40200000 intr 21: pxa2x0, 32 byte fifo
com2 at pxaip0 addr 0x40700000 intr 20: pxa2x0, 32 byte fifo (SIR)
pxaudc0 at pxaip0: USB Device Controller
ohci0 at pxaip0, version 1.0
usb0 at ohci0: USB revision 1.0
uhub0 at usb0
uhub0: PXA27x OHCI root hub, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
lcd_pxaip0 at pxaip0
wsdisplay0 at lcd_pxaip0 mux 1: console (std, vt100 emulation)
zkbd0 at pxaip0
wskbd0 at zkbd0: console keyboard, using wsdisplay0
scoop0 at pxaip0: PCMCIA/GPIO controller
scoop1 at pxaip0: PCMCIA/GPIO controller
pxapcic0 at pxaip0: 2 slots
pcmcia0 at pxapcic0
pcmcia1 at pxapcic0
zssp0 at pxaip0
apm0 at pxaip0
zts0 at pxaip0
wsmouse0 at zts0 mux 0
clock: hz=100 stathz=64
rd0: fixed, 5120 blocks
wdc0 at pcmcia0 function 0 "HITACHI, microdrive" port 0x0/16: irq 138
wd0 at wdc0 channel 0 drive 0:
wd0: 32-sector PIO, LBA, 3906MB, 7999488 sectors
wd0(wdc0:0:0): using BIOS timings
boot_file: '(null)'
rootdev=0x1200 rrootdev=0x1200 rawdev=0x1202
WARNING: using filesystem date -- CHECK AND RESET THE DATE!
fdisk:Disk: /dev/rwd0c geometry: 7936/16/63 [7999488 Sectors]
Offset: 0 Signature: 0xAA55
Starting Ending LBA Info:
#: id C H S - C H S [ start: size ]
------------------------------------------------------------------------
0: 83 0 0 2 - 202 15 63 [ 1: 204623 ] Linux files*
1: 83 203 0 1 - 1018 15 63 [ 204624: 822528 ] Linux files*
2: 0B 1019 0 1 - 1118 3 19 [ 1027152: 100000 ] Win95 FAT-32
*3: A6 1119 0 1 - 7935 15 63 [ 1127952: 6871536 ] OpenBSD
disklabel:# /dev/rwd0c:
type: ESDI
disk: ESDI/IDE disk
label: HMS360404D5CF00
flags:
bytes/sector: 512
sectors/track: 63
tracks/cylinder: 16
sectors/cylinder: 1008
cylinders: 7936
total sectors: 7999488
rpm: 3600
interleave: 1
trackskew: 0
cylinderskew: 0
headswitch: 0 # microseconds
track-to-track seek: 0 # microseconds
drivedata: 0
16 partitions:
# size offset fstype [fsize bsize cpg]
a: 409554 1127952 4.2BSD 2048 16384 328 # Cyl 1119 - 1525*
b: 409544 1537506 swap # Cyl 1525*- 1931*
c: 7999488 0 unused 0 0 # Cyl 0 - 7935
d: 603456 1947050 4.2BSD 2048 16384 328 # Cyl 1931*- 2530*
e: 1004859 2550506 4.2BSD 2048 16384 328 # Cyl 2530*- 3527*
f: 4444123 3555365 4.2BSD 2048 16384 328 # Cyl 3527*- 7935
i: 204623 1 ext2fs # Cyl 0*- 202
j: 822528 204624 ext2fs # Cyl 203 - 1018
k: 100000 1027152 MSDOS # Cyl 1019 - 1118*Mountpoints are:
a: - /
d: - /tmp
e: - /var
f: - /usr
(This i've entered when was asked by installer.)
There are previous posts and threads here regarding getting those info.
I think you have a corrupted boot loader, kernel and/or improperly partitioned
disk, but need additional info to diagnose and provide relevant solutions.
It's rather strange, because i've got them with latest snapshot (even md5's are the same).
Best regards! Kojiro.
-
I think you have a corrupted boot loader, kernel and/or improperly partitioned
disk, but need additional info to diagnose and provide relevant solutions.
Yes, so it was. I've downloaded new snapshot today and installed it. OpenBSD boots ok.
Thanks.
(Here, in Russia no one uses Zaurus with OpenBSD [most think, that this is OS for maniacs].)
-
I think you have a corrupted boot loader, kernel and/or improperly partitioned
disk, but need additional info to diagnose and provide relevant solutions.
Yes, so it was. I've downloaded new snapshot today and installed it. OpenBSD boots ok.
Thanks.
(Here, in Russia no one uses Zaurus with OpenBSD [most think, that this is OS for maniacs].)
[div align=\"right\"][a href=\"index.php?act=findpost&pid=97057\"][{POST_SNAPBACK}][/a][/div]
БЗД рип, Линукс рулит
-
Will an unbiased party please translate