OESF Portables Forum
Model Specific Forums => Sharp Zaurus => Zaurus - pdaXrom => Topic started by: magicbb on October 04, 2005, 06:03:22 am
-
anyone got a intel pro wireless 2011b and is able to run kismet
when i start kismet, it says:
FATAL: Could not find 'monitor' private ioctl or use the newer style 'mode montor' command.
I am now using RC11, do i need to patch the driver in order to enable the monitor mode.
Please help
-
after i insert the card, i look at /var/log/messages and find the following errors
Oct 5 15:53:47 cardmgr[140]: socket 0: Intel PRO/Wireless 2011B CF Card
Oct 5 15:53:48 cardmgr[140]: executing: 'modprobe hermes 2>&1'
Oct 5 15:53:48 cardmgr[140]: + modprobe: Can't locate module hermes
Oct 5 15:53:48 cardmgr[140]: modprobe exited with status 255
Oct 5 15:53:48 cardmgr[140]: module /lib/modules/2.4.20/pcmcia/hermes.o not available
Oct 5 15:53:48 cardmgr[140]: executing: 'modprobe orinoco 2>&1'
Oct 5 15:53:48 cardmgr[140]: + modprobe: Can't locate module orinoco
Oct 5 15:53:48 cardmgr[140]: modprobe exited with status 255
Oct 5 15:53:48 cardmgr[140]: module /lib/modules/2.4.20/pcmcia/orinoco.o not available
Oct 5 15:53:49 /etc/hotplug/net.agent: NET unregister event not supported
Oct 5 15:53:49 /etc/hotplug/net.agent: how do I bring interfaces up on this distro?
Oct 5 15:53:49 /etc/hotplug/net.agent: register event not handled
it seems that orinoco.o and hermes.o is missing, how can i find these two files?
-
Please read the FAQ on pdaXrom.org and also have look at: https://www.oesf.org/forums/index.php?showt...759&#entry44759 (https://www.oesf.org/forums/index.php?showtopic=7151&st=0&p=44759&#entry44759)
-
now, it change to module /lib/modules/2.4.20/pcmcia/hostap.o not available
also there is no hostap_cs
-
Please read the FAQ on pdaXrom.org and also have look at: https://www.oesf.org/forums/index.php?showt...759&#entry44759 (https://www.oesf.org/forums/index.php?showtopic=7151&st=0&p=44759&#entry44759)
[div align=\"right\"][a href=\"index.php?act=findpost&pid=98257\"][{POST_SNAPBACK}][/a][/div]
i have bought a new card "Ambicom" today and make changes according to the instruction, but still no luck
there is no hostap.o
and after changes the card to bind "hostap_cs" instead of "orinoco_cs", the card didn't work at all (light of the wifi card turn off)
-
Did you start by running the wifi setup tool in system settings?
Bascially do a clean install and then run the tool - after that try unpluging the card and insert. Then post dmesg and cardctl info
-
Actually i have no problem in connecting the wifi to my router, i can browse the internet successfully, just can't run kismet. Anyway I have done a clean install and use the wifi tools, /var/log/messages is as follows:
Sep 28 09:53:27 cardmgr[694]: socket 0: Ambicom WL1100C 11Mbs Card 802.11b
Sep 28 09:53:27 cardmgr[694]: executing: 'modprobe hermes 2>&1'
Sep 28 09:53:27 cardmgr[694]: + modprobe: Can't locate module hermes
Sep 28 09:53:27 cardmgr[694]: modprobe exited with status 255
Sep 28 09:53:27 cardmgr[694]: module /lib/modules/2.4.20/pcmcia/hermes.o not ava
Sep 28 09:53:27 cardmgr[694]: executing: 'modprobe orinoco 2>&1'
Sep 28 09:53:27 cardmgr[694]: + modprobe: Can't locate module orinoco
Sep 28 09:53:27 cardmgr[694]: modprobe exited with status 255
Sep 28 09:53:27 cardmgr[694]: module /lib/modules/2.4.20/pcmcia/orinoco.o not av
Sep 28 09:53:29 /etc/hotplug/net.agent: NET unregister event not supported
Sep 28 09:53:29 /etc/hotplug/net.agent: how do I bring interfaces up on this dis
Sep 28 09:53:29 /etc/hotplug/net.agent: register event not handled
cardctl info is as follows:
PRODID_1="AmbiCom"
PRODID_2="WL1100C 802.11b CF-Card"
PRODID_3="2.2"
PRODID_4=""
MANFID=d601,0002
FUNCID=6
PRODID_1=""
PRODID_2=""
PRODID_3=""
PRODID_4=""
MANFID=0000,0000
FUNCID=255
My case is exactly the same as this:
https://www.oesf.org/forums/index.php?showt...indpost&p=85339 (https://www.oesf.org/forums/index.php?showtopic=12631&view=findpost&p=85339)
do i need to use his way to use the kernel module from sharp rom?
-
How did you setup your kismet config file for the capture device?
Tried the cardctl scheme CardResume and the kismet trick?
Which Zaurus are you running - ALWAYS STATE that!
-
already try the cardctl scheme CardResume, but still won't work
what kind of kismet trick are you referring to?
sorry, i am using c1000