OESF Portables Forum
Everything Else => Sharp Zaurus => Model Specific Forums => Distros, Development, and Model Specific Forums => Archived Forums => C1000/3x00 Hardware => Topic started by: runahue on October 07, 2005, 11:25:55 am
-
Hello friend:
Today is my first day with my Zaurus sl-c3100 and i have some dubts.
I am a Linux users some years ago.
Version:
Qtopia
Version 1.5.4
Biult Jul 5 2005 by trolltech
Kernel 2.4.20 compiled by Lineo Solutions
Model SL-C3100
ROM Version 1.02jp
My questions:
What ROM do i have?
Is the original Sharp Rom?
Another question about wireless:
i use an Ambicom 11b wireless card.
It seems run OK but my problem is that it suspends very very quick.
I insert it and after load modules i see in dmesg: pxa_pcmcia_suspend(0)
If i add the interfaces to settings --> network , the card is ON while is looking for networks, after that it turns Off.
With this problems i can't run kismet of config card by hand.
If i type cardctl reset 0 it lights only 2 or 3 seconds and after that another time suspends.
A lof of thank's
-
Hello friend:
Today is my first day with my Zaurus sl-c3100 and i have some dubts.
I am a Linux users some years ago.
Version:
Qtopia
Version 1.5.4
Biult Jul 5 2005 by trolltech
Kernel 2.4.20 compiled by Lineo Solutions
Model SL-C3100
ROM Version 1.02jp
My questions:
What ROM do i have?
Is the original Sharp Rom?
Another question about wireless:
i use an Ambicom 11b wireless card.
It seems run OK but my problem is that it suspends very very quick.
I insert it and after load modules i see in dmesg: pxa_pcmcia_suspend(0)
If i add the interfaces to settings --> network , the card is ON while is looking for networks, after that it turns Off.
With this problems i can't run kismet of config card by hand.
If i type cardctl reset 0 it lights only 2 or 3 seconds and after that another time suspends.
A lof of thank's
[div align=\"right\"][{POST_SNAPBACK}][/a][/div] (http://index.php?act=findpost&pid=98565\")
Hmm. Why the double post?
To answer some of your questions
1. Yes, you have the stock sharp rom
2. There are various sites explaining how to set up kismet. The best is Meanie's site, here: [a href=\"http://www.users.on.net/~hluc/myZaurus/]http://www.users.on.net/~hluc/myZaurus/[/url]
3. I am not exactly sure what your problem is related to the card suspending - my card only suspends if I allow it to suspend. Maybe a Kismet configuration problem? Again: check if Meanie's site has the answer for you...
-
3. I am not exactly sure what your problem is related to the card suspending - my card only suspends if I allow it to suspend. Maybe a Kismet configuration problem? Again: check if Meanie's site has the answer for you...
[div align=\"right\"][a href=\"index.php?act=findpost&pid=98569\"][{POST_SNAPBACK}][/a][/div]
That is the question...how do you allow and don't allow it to suspend?
excuse me about double post.
thank's
-
That is the question...how do you allow and don't allow it to suspend?
[div align=\"right\"][a href=\"index.php?act=findpost&pid=98571\"][{POST_SNAPBACK}][/a][/div]
I dont. Its all automatic: it just works as it should. ( Maybe due to the Cacko Rom?)
Again: check Meanie's site for Kismet instructions...
-
Again: check Meanie's site for Kismet instructions...
[div align=\"right\"][a href=\"index.php?act=findpost&pid=98572\"][{POST_SNAPBACK}][/a][/div]
i have done it an kismet runs...but only when card is active.
the problem is that is very dificult for me to have it active
-
a little question:
where could i download Cacko Rom to test it?
thank's
-
An easy way to keep it from suspending is to setup an adhoc network on the Zaurus. I have to do it w/ my Ambicom 802.11b card to use Wellenreiter. It doesnt really matter what the information for the network is, at least with Wellenreiter.