OESF Portables Forum
Everything Else => Zaurus - Everything Development => Distros, Development, and Model Specific Forums => Archived Forums => X/Qt => Topic started by: Meanie on November 20, 2005, 09:41:26 pm
-
Hi all,
I have build some cramfs images with X/Qt preconfiured on it and also some X applications ready to go. This has been tested on C3x00 and C1000 models with the Sharp ROM and should also work on other models as well. All the cramfs images can be installed on SD or CF cards.
The bundle comes in several files,
xqt-gtk-jumbo.cramfs is the preconfigured X/Qt image
xqt-apps.cramfs contains various X applications (abiword,dillo,ethereal,flfm,fltdj,gimp,gqview,gnumeric,grisbi,minimo,nedit,sylp
eed,xchat,xmms)
xqt-mozilla.cramfs contains firefox and thunderbird
java.cramfs contains the full 1.3.1 jre plus compiler tools
xqt-openoffice.cramfs contains openoffice 1.1.4
and an install script to automatically configure the cramfs images
details can be found at http://www.users.on.net/~hluc/myZaurus/jumbo/xqtjumbo.html (http://www.users.on.net/~hluc/myZaurus/jumbo/xqtjumbo.html)
and discussions about these packages are on the C1000/3x00 General discussions forums https://www.oesf.org/forums/index.php?showtopic=13011 (https://www.oesf.org/forums/index.php?showtopic=13011)
-
Hi all,
I have build some cramfs images with X/Qt preconfiured on it and also some X applications ready to go. This has been tested on C3x00 and C1000 models with the Sharp ROM and should also work on other models as well. All the cramfs images can be installed on SD or CF cards.
The bundle comes in several files,
xqt-gtk-jumbo.cramfs is the preconfigured X/Qt image
xqt-apps.cramfs contains various X applications (abiword,dillo,ethereal,flfm,fltdj,gimp,gqview,gnumeric,grisbi,minimo,nedit,sylp
eed,xchat,xmms)
xqt-mozilla.cramfs contains firefox and thunderbird
java.cramfs contains the full 1.3.1 jre plus compiler tools
xqt-openoffice.cramfs contains openoffice 1.1.4
and an install script to automatically configure the cramfs images
details can be found at http://www.users.on.net/~hluc/myZaurus/jumbo/xqtjumbo.html (http://www.users.on.net/~hluc/myZaurus/jumbo/xqtjumbo.html)
and discussions about these packages are on the C1000/3x00 General discussions forums https://www.oesf.org/forums/index.php?showtopic=13011 (https://www.oesf.org/forums/index.php?showtopic=13011)
[div align=\"right\"][a href=\"index.php?act=findpost&pid=104372\"][{POST_SNAPBACK}][/a][/div]
Thanks Meanie, that is awesome. I am fixing to try it out. With all the information on your website and the time and effort you have put into your jumbo X/QT package and then this, you have been a great resource (along with everyone on OESF) for all of us who are just getting our feet wet with the capabilites of our Zaurus.
-Mark
-
Hi all
I have installed the cramfs on my c860, every thing is ok
included openoffice cramfs
thanks meanie
What i wolud like now is to make the fonts of xqt same as on cacko
i mean bigger and bold
any help guys
-
Hi all,
I have build some cramfs images with X/Qt preconfiured on it and also some X applications ready to go. This has been tested on C3x00 and C1000 models with the Sharp ROM and should also work on other models as well. All the cramfs images can be installed on SD or CF cards.
Thanks a lot Meanie!
I got it installed and running, as per your most excellent instructions. However, I have 2 remaining questions (perhaps more laster)
1) On your web page you show the pop-up menu for fluxbox, how did you do that? What/where do you tap to get the pop-up to pop up?
2)xmodmaprc file. I am running on a SL6000, and the built in keyboard works fine, but my nice IR Pocketop keyboard does not type lower case letters (only upper and numbers). When I look at your example xmodrc file, I don't see lower case, which is probably why.
Question is: How does one determine the scan codes of letters typed? I tried xev, but it doesn't seem to print anything when I type lower case letters
Thanks again!
Craig...
==== Edited on 26 Jan =================
OK, I have answers.
1) use the Fn key and tap to get the right button. Is this key definable (in some conf file)? On a SL-6000, it would be nice to move this key to an outside button (like the "dot" button).
2)This seems to be a confusion point between the internal keyboard (on a SL-6000) and the IR keyboard as to what is caps lock. If I press caps lock on the IR keyboard, then I get small chars in Xqt, and caps in Qt. Kind of odd, but it works. Again, is there a config file that sets up what is caps and what is not?
Thanks again,
Craig...
-
Is it possible to install packages onto the cramfs? I want to add gaim and possibly a newer version of grisbi but it doesn't work.
-
Is it possible to install packages onto the cramfs? I want to add gaim and possibly a newer version of grisbi but it doesn't work.
[div align=\"right\"][a href=\"index.php?act=findpost&pid=113811\"][{POST_SNAPBACK}][/a][/div]
I am sure others are more knowledgable than I on this, but I believe that cramfs is (for the Zaurus) really readonly. That is because it is a compressed FS, it must be written in its entirety (at once). Given this, probably the X/qt images should be mounted as ro rather than rw.
Creating a cramfs image to use on the Zaurus is a whole different discussion. Unfortunately, I have no experience there.
I hope this helps,
Craig...
-
Anyone can insert gpsdrive in the apps cram image ?
-
Anyone can insert gpsdrive in the apps cram image ?
[div align=\"right\"][a href=\"index.php?act=findpost&pid=115023\"][{POST_SNAPBACK}][/a][/div]
Actually you can create your own. After I posted above I later went back to meanie's site and he explains how to make your own image in addition to the ones he has. So I was able to make one for gaim. You need to do a lot of dependancy searching though.
-
ok x works, apps work but they are useless to me because i cant get the keyboard to work...
# xmodmap -pke > /home/zaurus/.xmodmaprc
this just gives me this error:
error while loading shared libs, libx11.so.6: cannot load shared object file: no such file or dir
also i have no idea how to remap. the whole instruction set is unclear to such a newbie as i am..
C760, cacko 1.23...
thanks...
-
Hello ppl, Im trying to install xqt pack on hhd4 (ext3, mounted at boot) with cacko 1.23 rom.
The installation ends OK but I couldnt find a way to run xipk-link or ipkg-link to link the package with /
Any help?
-
Hello ppl, Im trying to install xqt pack on hhd4 (ext3, mounted at boot) with cacko 1.23 rom.
The installation ends OK but I couldnt find a way to run xipk-link or ipkg-link to link the package with /
Any help?
[div align=\"right\"][a href=\"index.php?act=findpost&pid=118002\"][{POST_SNAPBACK}][/a][/div]
you need to install the ipktools package for either of the above commands. the installer/setup scripts in the cramfs images is actually a modified xipk-link script. you are probably better off using the cramfs images since they are newer and if you want more speed, you can mount the cramfs images and copy their contents to /hdd4 before running the setup scripts.
-
thnx alot
-
Hey meanie, any news on an updated version of the cramfs?
-
I am still waiting for the non-cramfs update...
-
New question!
Do I need to use some other key map for debian? I have c3100 so as Meanie says it is included in the xqt pack... but in debian I can write on the terminal! (some chars are working but other are wrong! ex. P=backspace!!! )
-
New question!
Do I need to use some other key map for debian? I have c3100 so as Meanie says it is included in the xqt pack... but in debian I can write on the terminal! (some chars are working but other are wrong! ex. P=backspace!!! )
[div align=\"right\"][a href=\"index.php?act=findpost&pid=118203\"][{POST_SNAPBACK}][/a][/div]
Strange, all my keys work fine. try the keymap provided on the site and if that does not work, then use xev to customise
-
Hi meanie,
it seems that the location of the cramfs changed (http://www.thegrinder.ws/Meanies_XQT/cram/) , it is now : http://thegrinder.ws/Meanies_XQT/cram/ (http://thegrinder.ws/Meanies_XQT/cram/)
upd : http://www.thegrinder.ws/Meanies_XQT/cram/ (http://www.thegrinder.ws/Meanies_XQT/cram/) is working now (???)
-
Can be found here : http://zaurus.daemons.gr/menaie/mirror/jumbo/images/ (http://zaurus.daemons.gr/menaie/mirror/jumbo/images/)
varoudis@jefferson [~/public_html/zaurus/menaie/mirror/jumbo/images]# ls -la
total 499348
drwxr-xr-x 2 varoudis varoudis 4096 Mar 18 23:12 ./
drwxr-xr-x 5 varoudis varoudis 4096 Mar 18 03:20 ../
-rw-r--r-- 1 varoudis varoudis 23714687 Mar 18 02:08 java.cramfs.zip
-rw-r--r-- 1 varoudis varoudis 21101074 Mar 18 10:31 java.squashfs.zip
-rw-r--r-- 1 varoudis varoudis 21679371 Mar 18 11:29 java.tgz
-rw-r--r-- 1 varoudis varoudis 50378227 Mar 18 03:51 xqt-apps.cramfs.zip
-rw-r--r-- 1 varoudis varoudis 44021173 Mar 18 13:31 xqt-apps.squashfs.zip
-rw-r--r-- 1 varoudis varoudis 40791677 Mar 18 15:12 xqt-apps.tgz
-rw-r--r-- 1 varoudis varoudis 1127 Mar 18 03:51 xqt-cleanup.zip
-rw-r--r-- 1 varoudis varoudis 18653657 Mar 18 16:00 xqt-gtk-jumbo.cramfs.zip
-rw-r--r-- 1 varoudis varoudis 16936474 Mar 18 16:35 xqt-gtk-jumbo.squashfs.zip
-rw-r--r-- 1 varoudis varoudis 17095285 Mar 18 16:59 xqt-gtk-jumbo.tgz
-rw-r--r-- 1 varoudis varoudis 1917 Mar 18 09:37 xqt-install.sh.zip
-rw-r--r-- 1 varoudis varoudis 23749823 Mar 18 05:14 xqt-mozilla.cramfs.zip
-rw-r--r-- 1 varoudis varoudis 20063296 Mar 18 17:27 xqt-mozilla.squashfs.zip
-rw-r--r-- 1 varoudis varoudis 20147041 Mar 18 18:08 xqt-mozilla.tgz
-rw-r--r-- 1 varoudis varoudis 103252523 Mar 18 09:33 xqt-openoffice.cramfs.zip
-rw-r--r-- 1 varoudis varoudis 89119794 Mar 18 23:12 xqt-openoffice.squashfs.zip
-
I hate it when I have so many choices. I wouldn't mind getting a little guidance what to do.
I currently have a C1000 with Cacko 1.23 and a 256MB SD card, currently with 111MB available (more with a cleanup). When I installed Cacko I had it repartitioned, IIRC so that Cacko was in 32MB and the other 96MB was open; currently 85MB is still available there. My system info also shows 10MB of "Temporary Storage", anybody know what that is? <later>Oops, I found that note on one of Meanie's pages, about the tmpfs during boot.
I understand there are two forms of X/Qt, one a cramfs (size?) and the other a regular ipk 40MB in size. I understand the ipk can go in my 96MB internal flash partition, or the SD (or CF if I had one) with an additional linking step using "xipk-link". And the cramfs can go anywhere.
I'm guessing it makes sense to load the ipk into the internal flash; I have read the performance starting up some of these big packages is not so great, so leaving out the decompression step and the slow SD access should help, right?
My highest priority is a good spreadsheet (better than Hancom Sheet). I would probably first try gnumeric, if it can import and export .xls files. Can I fit that also in the internal flash? Or should it go on the SD? Performance tradeoffs? If it doesn't work out for my application, the next step would be openoffice. Am I going to have trouble fitting openoffice into my current hardware?
Next priority would be Firefox and Thunderbird. Same sorts of questions.
I'm not necessarily looking for a detailed map of what's best for my C1000, but just some general guidelines for choosing one configuration over another.
Finally I remember reading somewhere I need 512MB of space on the SD, I don't see why because X/Qt is only 40MB, right? And even smaller as a cramfs? I want to know if I need to buy another SD to get what I want. <later>Oops, again I noticed that this refers to the space needed if OpenOffice is installed.
-
I'm guessing it makes sense to load the ipk into the internal flash; I have read the performance starting up some of these big packages is not so great, so leaving out the decompression step and the slow SD access should help, right?
yay i'd like to know that myself. using the cramfs from SD now and its slow to start up that's for sure..
-
Related to the last few posts, could Meanie or others comment on the pros and cons of using the various forms of Meanie's XQT-Jumbo packages:
1) non-cramfs
2) cramfs
3) squashfs
Not sure which one would be good for me to use on my C3100, now that I've restored my Z back to original state....
Also, besides the internal 4GB microdrive, I have a 1GB SD card that I usually leave in my 3100...I try to avoid depending on use of CF storage card so that I can always use my WiFi or Ethernet card....
Besides X/Qt, I'll probably install Debian too, so that's a consideration as well....
Appreciate all input!
Thanks,
Mark
-
I found that having an uncompressed image of the XQT Jumbo package on my SD card made the software run slower, probably due to the slow access time of the SD card.
-
X/Qt jumbo is now deprecated and not being updated anymore. Instead there is now X/Qt super jumbo aka pdaXqtrom. This new package is installed just like the jumbo cramfs images. The pdaXqtrom-base image replaces the xqt-gtk-jumbo image. The squashfs images have been uploaded, the cramfs images will follow shortly.
http://zaurus.daemons.gr/menaie/mirror/jum....html#pdaxqtrom (http://zaurus.daemons.gr/menaie/mirror/jumbo/xqtjumbo.html#pdaxqtrom)
Note: not all items on the menu are installed yet, but they will be in the next release. This release is for general testing to iron out bugs and see how well it works on other models apart from the C3x00 series. Check out the keyboard mappings and send me your fixes in case some keys are wrong since I am unable to test the keyboard mappings on other models except the ones I have. The SL-6000 should also work fine. Let me know about the window sizings.
-
X/Qt jumbo is now deprecated and not being updated anymore. Instead there is now X/Qt super jumbo aka pdaXqtrom. This new package is installed just like the jumbo cramfs images. The pdaXqt-base image replaces the xqt-gtk-jumbo image. The squashfs images have been uploaded, the cramfs images will follow shortly.
http://zaurus.daemons.gr/menaie/mirror/jum....html#pdaxqtrom (http://zaurus.daemons.gr/menaie/mirror/jumbo/xqtjumbo.html#pdaxqtrom)
[div align=\"right\"][a href=\"index.php?act=findpost&pid=124229\"][{POST_SNAPBACK}][/a][/div]
OH MY GOSH I LOVE YOU!
-
Hi Meanie,
Want to try out your new pdaXqtrom...but don't want to mess things up...
So since I already have X/Qt/Debian installed using your cramfs images on my /hdd3, what should I do before installing??
Should I uninstall X/Qt first? and Debian too??
If so, what's best way to uninstall??
Thanks,
Mark
X/Qt jumbo is now deprecated and not being updated anymore. Instead there is now X/Qt super jumbo aka pdaXqtrom. This new package is installed just like the jumbo cramfs images. The pdaXqtrom-base image replaces the xqt-gtk-jumbo image. The squashfs images have been uploaded, the cramfs images will follow shortly.
http://zaurus.daemons.gr/menaie/mirror/jum....html#pdaxqtrom (http://zaurus.daemons.gr/menaie/mirror/jumbo/xqtjumbo.html#pdaxqtrom)
Note: not all items on the menu are installed yet, but they will be in the next release. This release is for general testing to iron out bugs and see how well it works on other models apart from the C3x00 series. Check out the keyboard mappings and send me your fixes in case some keys are wrong since I am unable to test the keyboard mappings on other models except the ones I have. The SL-6000 should also work fine. Let me know about the window sizings.
[div align=\"right\"][a href=\"index.php?act=findpost&pid=124229\"][{POST_SNAPBACK}][/a][/div]
-
Hi Meanie,
Want to try out your new pdaXqtrom...but don't want to mess things up...
So since I already have X/Qt/Debian installed using your cramfs images on my /hdd3, what should I do before installing??
Should I uninstall X/Qt first? and Debian too??
If so, what's best way to uninstall??
Thanks,
Mark
X/Qt jumbo is now deprecated and not being updated anymore. Instead there is now X/Qt super jumbo aka pdaXqtrom. This new package is installed just like the jumbo cramfs images. The pdaXqtrom-base image replaces the xqt-gtk-jumbo image. The squashfs images have been uploaded, the cramfs images will follow shortly.
http://zaurus.daemons.gr/menaie/mirror/jum....html#pdaxqtrom (http://zaurus.daemons.gr/menaie/mirror/jumbo/xqtjumbo.html#pdaxqtrom)
Note: not all items on the menu are installed yet, but they will be in the next release. This release is for general testing to iron out bugs and see how well it works on other models apart from the C3x00 series. Check out the keyboard mappings and send me your fixes in case some keys are wrong since I am unable to test the keyboard mappings on other models except the ones I have. The SL-6000 should also work fine. Let me know about the window sizings.
[div align=\"right\"][a href=\"index.php?act=findpost&pid=124229\"][{POST_SNAPBACK}][/a][/div]
[div align=\"right\"][a href=\"index.php?act=findpost&pid=124276\"][{POST_SNAPBACK}][/a][/div]
you should have a xqt-gtk-jumbo item in your uninstall list. just uninstall it and then install pdaXqtrom, or if you have the cramfs version of xqt-gtk-jumbo installed, then you can also just install pdaXqtrom and it will just overrride xqt-gtk-jumbo links. you can easily switch between pdaXqtrom and xqt-gtk-jumbo by just re-running their setup scripts. if yo installed the ipk, then you should uninstall it. pocketworkstation is currently being ignored by the pdaXqtrom. well, it calls debrunner to launch pocketworkstation, but debrunner doesn't exist yet i will add that later...
-
X/Qt jumbo is now deprecated and not being updated anymore. Instead there is now X/Qt super jumbo aka pdaXqtrom. This new package is installed just like the jumbo cramfs images. The pdaXqtrom-base image replaces the xqt-gtk-jumbo image. The squashfs images have been uploaded, the cramfs images will follow shortly.
http://zaurus.daemons.gr/menaie/mirror/jum....html#pdaxqtrom (http://zaurus.daemons.gr/menaie/mirror/jumbo/xqtjumbo.html#pdaxqtrom)
Note: not all items on the menu are installed yet, but they will be in the next release. This release is for general testing to iron out bugs and see how well it works on other models apart from the C3x00 series. Check out the keyboard mappings and send me your fixes in case some keys are wrong since I am unable to test the keyboard mappings on other models except the ones I have. The SL-6000 should also work fine. Let me know about the window sizings.
[div align=\"right\"][a href=\"index.php?act=findpost&pid=124229\"][{POST_SNAPBACK}][/a][/div]
Hi all
MEANIE WHAT TO SAY? YOU ARE THE BEST!!!
It is amazing what you did ! a great work !
I have just installed your PDAXQTROM and it's feeds on my C860, and the first good surprise for me is GTK2 THEME SWITCHER, even on pdaxrom i didn't have this pleasure GNUMERIC GIMP GQVIEW all with big bold fonts menu, it was like a gift for me, thanks guy
first results of my testing all seems to work fine , only ABIWORD doesn't work it hungs immediately after a small white square
the keymapping have not yet tested
i will post more informations after testing keymapping and each application
cheers
freebird
-
bummer. it appears that the new cramfs jumbo package has messed up my wget. I hope it hasn't messed up anything else.
$ wget http://radnimax.com/misc/screenshot1.jpg
--01:42:06-- http://radnimax.com/misc/screenshot1.jpg
=> `screenshot1.jpg'
Resolving radnimax.com... 24.4.222.188
wget: error while loading shared libraries: wget: undefined symbol: __umodsi3
$
Wget is required by shoutcast player and now it can't get any playlists.
Anyone know a fix for this?
-
bummer. it appears that the new cramfs jumbo package has messed up my wget. I hope it hasn't messed up anything else.
$ wget http://radnimax.com/misc/screenshot1.jpg
--01:42:06-- http://radnimax.com/misc/screenshot1.jpg
=> `screenshot1.jpg'
Resolving radnimax.com... 24.4.222.188
wget: error while loading shared libraries: wget: undefined symbol: __umodsi3
$
Wget is required by shoutcast player and now it can't get any playlists.
Anyone know a fix for this?
[div align=\"right\"][{POST_SNAPBACK}][/a][/div] (http://index.php?act=findpost&pid=124336\")
hm.. what version of wget are you using? maybe try a newer version.
try this link [a href=\"http://zaurus.daemons.gr/menaie/feed/]http://zaurus.daemons.gr/menaie/feed/[/url]
-
Hi MEANIE
here are some reports after testing on my c860
gqview and xpdf sizing is ok
but abiword and stardict doesn't work
here is what i get when trying to launch abiword
$xlauncher abiword
launching abiword - please wait a moment...
(process:405): Gdk-WARNING **: locale not supported by C library
(abiword:405): Gtk-WARNING **: locale not supported by C library.
Using the fallback 'C' locale.
(abiword:405):GdkPixbuf-WARNING **: Error loading XPM image loader: image type 'xpm' is not supported
(abiword:405):Gtk-CRITICAL **: gtk_icon_set_new_from_pixbuf: assertion 'pixbuf !=NULL' failed
(abiword:405):Gtk-CRITICAL **: gtk_icon_factory_add: assertion 'icon_set != NULL' failed
(abiword:405):Gtk-CRITICAL **: gtk_icon_set_unref: assertion 'icon_set != NULL' failedand here is what i get when trying to launch stardict
$xlauncher stardict
launching stardict - please wait a moment...
(sardict:428): Gtk-WARNING **: locale not supported by C library
Using the fallback 'C' locale.
(sardict:428): Gdk-WARNING **: locale not supported by C library
(gnome_segv:431):Gtk-WARNING **: locale not supported by C library
Using the fallback 'C' locale.
(gnome_segv:431):Gdk-WARNING **: locale not supported by C library then a message box is opened with this text THE APPLICATION "stardict" has quit unexpectedly.
choose restart application or close
cheers
freebird
-
Did what you suggested, Meanie...uninstalled 'xqt-gtk-jumbo' first using uninstaller then installed pdaXqtrom using your new files and script.
Here's what I got in console:
bash-2.05$ su
# ./pdaXqtrom-install.sh
X/Qt super jumbo installer - version 0.3.6
automounter is not installed.
it is recommended to install automounter or something similar
The system has 7 loop devices.
There are 3 cramfs/squashfs images.
...checking for pdaXqtrom-base.cramfs
pdaXqtrom-base.cramfs not found.
...installing pdaXqtrom-base to /hdd3
Warning: ambiguous entry for pdaXqtrom-base.squashfs found in /etc/fstab
pdaXqtrom 1.1.0 - beta 0.7.5
Installing pdaXqtrom-base on borzoi...
...updating package info
...copying desktop config files to /opt/QtPalmtop/apps/XQt
...copying .directory to /opt/QtPalmtop/apps/XQt/.directory
...copying .order to /opt/QtPalmtop/apps/XQt/.order
...copying Xqt.desktop to /opt/QtPalmtop/apps/XQt/Xqt.desktop
...copying startx.desktop to /opt/QtPalmtop/apps/XQt/startx.desktop
...copying icons files to /opt/QtPalmtop/pics144
...copying Xqt.png to /opt/QtPalmtop/pics144/Xqt.png
...copying startx.png to /opt/QtPalmtop/pics144/startx.png
...copying xsplash.png to /opt/QtPalmtop/pics144/xsplash.png
...copying xtab.png to /opt/QtPalmtop/pics144/xtab.png
...copying xterm.png to /opt/QtPalmtop/pics144/xterm.png
...linking files to /opt/QtPalmtop/help/html
...linking files to /opt/QtPalmtop/share/locale/ja/LC_MESSAGES
...linking files to /opt/QtPalmtop/share/themes
...linking files to /opt/QtPalmtop/share
...linking files to /opt/QtPalmtop/etc
...linking files to /opt/QtPalmtop/bin
...linking files to /opt/QtPalmtop/lib/X11
...linking files to /opt/QtPalmtop/lib/gconv
...linking files to /opt/QtPalmtop/lib/glib-2.0
...linking files to /opt/QtPalmtop/lib/gtk-2.0
...linking files to /opt/QtPalmtop/lib/locale
...linking files to /opt/QtPalmtop/lib/pango
...linking files to /opt/QtPalmtop/lib
...linking files to /usr/bin
...linking files to /usr/lib
...linking files to /usr/share
...linking files to /usr/local/bin
...linking files to /usr/local/lib
...linking files to /usr/local/share
...copying config files to /etc/X11
...copying app-defaults to /etc/X11/app-defaults
...copying defaultwm to /etc/X11/defaultwm
...copying kb to /etc/X11/kb
...copying proxymngr to /etc/X11/proxymngr
...copying xinit to /etc/X11/xinit
...copying xserver to /etc/X11/xserver
...copying config files to /etc/bonobo-activation
...copying bonobo-activation-config.xml to /etc/bonobo-activation/bonobo-activation-config.xml
...copying config files to /etc/fonts
...copying fonts.conf to /etc/fonts/fonts.conf
...copying fonts.dtd to /etc/fonts/fonts.dtd
...copying local.conf to /etc/fonts/local.conf
...copying config files to /etc/gconf
...copying 2 to /etc/gconf/2
...copying gconf.xml.defaults to /etc/gconf/gconf.xml.defaults
...copying gconf.xml.mandatory to /etc/gconf/gconf.xml.mandatory
...copying schemas to /etc/gconf/schemas
...copying config files to /etc/gnome-vfs-2.0
...copying modules to /etc/gnome-vfs-2.0/modules
...copying config files to /etc/gtk-2.0
...copying config files to /etc/imlib
...copying im_palette-small.pal to /etc/imlib/im_palette-small.pal
...copying im_palette-tiny.pal to /etc/imlib/im_palette-tiny.pal
...copying im_palette.pal to /etc/imlib/im_palette.pal
...copying imrc to /etc/imlib/imrc
...copying config files to /etc/pango
...copying pangox.aliases to /etc/pango/pangox.aliases
...copying config files to /etc/sound
...copying events to /etc/sound/events
...linking X server and config
...copying xmodmaprc to /etc/X11/kb
...copying user config files to /home/zaurus
...copying .gtkrc to /home/zaurus/.gtkrc
...copying .gtkrc-2.0 to /home/zaurus/.gtkrc-2.0
...loading libraries
...generating config files
gtk-query-immodules-2.0: error while loading shared libraries: libXrandr.so.2: cannot load shared object file: No such file or directory
pdaXqtrom-base configured.
...checking for pdaXqtrom-apps.cramfs
pdaXqtrom-apps.cramfs not found.
...installing pdaXqtrom-apps to /hdd3
Warning: ambiguous entry for pdaXqtrom-apps.squashfs found in /etc/fstab
mount: Mounting /hdd3/pdaXqtrom-apps.squashfs on /mnt/pdaXqtrom-apps failed: Invalid argument
...checking for zgcc2-95-2.cramfs
zgcc2-95-2.cramfs not found.
...installing zgcc2-95-2 to /hdd3
Warning: ambiguous entry for zgcc2-95-2.squashfs found in /etc/fstab
mount: Mounting /hdd3/zgcc2-95-2.squashfs on /mnt/zgcc failed: Invalid argument
X/Qt installed and configured (if found).
#
One weird thing is that I checked to make sure and I do have automounter installed!
Any suggestions??
Thanks,
Mark
Hi Meanie,
Want to try out your new pdaXqtrom...but don't want to mess things up...Â
So since I already have X/Qt/Debian installed using your cramfs images on my /hdd3, what should I do before installing??
Should I uninstall X/Qt first? and Debian too??
If so, what's best way to uninstall??
Thanks,
Mark
you should have a xqt-gtk-jumbo item in your uninstall list. just uninstall it and then install pdaXqtrom, or if you have the cramfs version of xqt-gtk-jumbo installed, then you can also just install pdaXqtrom and it will just overrride xqt-gtk-jumbo links. you can easily switch between pdaXqtrom and xqt-gtk-jumbo by just re-running their setup scripts. if yo installed the ipk, then you should uninstall it. pocketworkstation is currently being ignored by the pdaXqtrom. well, it calls debrunner to launch pocketworkstation, but debrunner doesn't exist yet i will add that later...
[div align=\"right\"][a href=\"index.php?act=findpost&pid=124328\"][{POST_SNAPBACK}][/a][/div]
-
bummer. it appears that the new cramfs jumbo package has messed up my wget. I hope it hasn't messed up anything else.
$ wget http://radnimax.com/misc/screenshot1.jpg
--01:42:06-- http://radnimax.com/misc/screenshot1.jpg
=> `screenshot1.jpg'
Resolving radnimax.com... 24.4.222.188
wget: error while loading shared libraries: wget: undefined symbol: __umodsi3
$
Wget is required by shoutcast player and now it can't get any playlists.
Anyone know a fix for this?
[div align=\"right\"][{POST_SNAPBACK}][/a][/div] (http://index.php?act=findpost&pid=124336\")
hm.. what version of wget are you using? maybe try a newer version.
try this link [a href=\"http://zaurus.daemons.gr/menaie/feed/]http://zaurus.daemons.gr/menaie/feed/[/url]
[div align=\"right\"][a href=\"index.php?act=findpost&pid=124358\"][{POST_SNAPBACK}][/a][/div]
The version I have is 1.10.2
I'll try the one on that feed next chance I get. I currently do not have a wget package listed in my install list so it must be the one that came with cacko/sharp rom.
-
Hey ArchiMark, after you uninstalled the previous version did you remimber to remove the mounts from your fstab and reboot?
-
Ummmmm......no........
So I'll do that and try again, right???......
Thanks, xamindar!
Mark
Hey ArchiMark, after you uninstalled the previous version did you remimber to remove the mounts from your fstab and reboot?
[div align=\"right\"][a href=\"index.php?act=findpost&pid=124413\"][{POST_SNAPBACK}][/a][/div]
-
Hi MEANIE
here are some reports after testing on my c860
gqview and xpdf sizing is ok
but abiword and stardict doesn't work
here is what i get when trying to launch abiword
$xlauncher abiword
launching abiword - please wait a moment...
(process:405): Gdk-WARNING **: locale not supported by C library
(abiword:405): Gtk-WARNING **: locale not supported by C library.
Using the fallback 'C' locale.
(abiword:405):GdkPixbuf-WARNING **: Error loading XPM image loader: image type 'xpm' is not supported
(abiword:405):Gtk-CRITICAL **: gtk_icon_set_new_from_pixbuf: assertion 'pixbuf !=NULL' failed
(abiword:405):Gtk-CRITICAL **: gtk_icon_factory_add: assertion 'icon_set != NULL' failed
(abiword:405):Gtk-CRITICAL **: gtk_icon_set_unref: assertion 'icon_set != NULL' failedand here is what i get when trying to launch stardict
$xlauncher stardict
launching stardict - please wait a moment...
(sardict:428): Gtk-WARNING **: locale not supported by C library
Using the fallback 'C' locale.
(sardict:428): Gdk-WARNING **: locale not supported by C library
(gnome_segv:431):Gtk-WARNING **: locale not supported by C library
Using the fallback 'C' locale.
(gnome_segv:431):Gdk-WARNING **: locale not supported by C library then a message box is opened with this text THE APPLICATION "stardict" has quit unexpectedly.
choose restart application or close
cheers
freebird
[div align=\"right\"][a href=\"index.php?act=findpost&pid=124394\"][{POST_SNAPBACK}][/a][/div]
oh, he C locale problem again. That one is easy to fix.
Add
export LC_ALL=C
export LANGUAGE=Cinto /home/zaurus/.profile
if the file does not exist, create a new one
# source /home/zaurus/.profile
to apply the setting or quit the console and start it again.
also, remove /etc/X11 directory and rerun pdaXqtrom-base-setup
-
Well...just tried what you suggested, xamindar, but I'm still getting error messages during install....
Deleted about 5-6 mounts in my fstab and then rebooted before trying to reinstall again....
bash-2.05$ su
# cd /hdd3
# ls
debroot pdaXqtrom-base.squashfs usr xqt-install.sh
home pdaXqtrom-install.sh xqt-apps.cramfs zgcc2-95-2.squashfs
install.sh pocketworkstation xqt-cleanup
pdaXqtrom-apps.squashfs swapfile xqt-gtk-jumbo.cramfs
# ./pdaXqtrom-install.sh
X/Qt super jumbo installer - version 0.3.6
automounter is not installed.
it is recommended to install automounter or something similar
The system has 7 loop devices.
There are 3 cramfs/squashfs images.
...checking for pdaXqtrom-base.cramfs
pdaXqtrom-base.cramfs not found.
...installing pdaXqtrom-base to /hdd3
Warning: ambiguous entry for pdaXqtrom-base.squashfs found in /etc/fstab
pdaXqtrom 1.1.0 - beta 0.7.5
Installing pdaXqtrom-base on borzoi...
...updating package info
...copying desktop config files to /opt/QtPalmtop/apps/XQt
...copying icons files to /opt/QtPalmtop/pics144
...linking files to /opt/QtPalmtop/help/html
...linking files to /opt/QtPalmtop/share/locale/ja/LC_MESSAGES
...linking files to /opt/QtPalmtop/share/themes
...linking files to /opt/QtPalmtop/share
...linking files to /opt/QtPalmtop/etc
...linking files to /opt/QtPalmtop/bin
...linking files to /opt/QtPalmtop/lib/X11
...linking files to /opt/QtPalmtop/lib/gconv
...linking files to /opt/QtPalmtop/lib/glib-2.0
...linking files to /opt/QtPalmtop/lib/gtk-2.0
...linking files to /opt/QtPalmtop/lib/locale
...linking files to /opt/QtPalmtop/lib/pango
...linking files to /opt/QtPalmtop/lib
...linking files to /usr/bin
...linking files to /usr/lib
...linking files to /usr/share
...linking files to /usr/local/bin
...linking files to /usr/local/lib
...linking files to /usr/local/share
...copying config files to /etc/X11
...copying config files to /etc/bonobo-activation
...copying config files to /etc/fonts
...copying config files to /etc/gconf
...copying config files to /etc/gnome-vfs-2.0
...copying config files to /etc/gtk-2.0
...copying config files to /etc/imlib
...copying config files to /etc/pango
...copying config files to /etc/sound
...linking X server and config
...copying user config files to /home/zaurus
...loading libraries
...generating config files
pdaXqtrom-base configured.
...checking for pdaXqtrom-apps.cramfs
pdaXqtrom-apps.cramfs not found.
...installing pdaXqtrom-apps to /hdd3
Warning: ambiguous entry for pdaXqtrom-apps.squashfs found in /etc/fstab
pdaXqtApps - beta 0.7.5
Installing pdaXqtApps on borzoi...
...updating package info
...copying desktop config files to /opt/QtPalmtop/apps/XQt
...copying abiword.desktop to /opt/QtPalmtop/apps/XQt/abiword.desktop
...copying dillo.desktop to /opt/QtPalmtop/apps/XQt/dillo.desktop
...copying firefox.desktop to /opt/QtPalmtop/apps/XQt/firefox.desktop
...copying galculator.desktop to /opt/QtPalmtop/apps/XQt/galculator.desktop
...copying gimp.desktop to /opt/QtPalmtop/apps/XQt/gimp.desktop
...copying scite.desktop to /opt/QtPalmtop/apps/XQt/scite.desktop
...copying stardict.desktop to /opt/QtPalmtop/apps/XQt/stardict.desktop
...copying sylpheed.desktop to /opt/QtPalmtop/apps/XQt/sylpheed.desktop
...copying thunderbird.desktop to /opt/QtPalmtop/apps/XQt/thunderbird.desktop
...copying xarchiver.desktop to /opt/QtPalmtop/apps/XQt/xarchiver.desktop
...copying xchat.desktop to /opt/QtPalmtop/apps/XQt/xchat.desktop
...copying xpdf.desktop to /opt/QtPalmtop/apps/XQt/xpdf.desktop
...copying icons files to /opt/QtPalmtop/pics144
...copying abiword.png to /opt/QtPalmtop/pics144/abiword.png
...copying dillo.png to /opt/QtPalmtop/pics144/dillo.png
...copying ethereal.png to /opt/QtPalmtop/pics144/ethereal.png
...copying firefox.png to /opt/QtPalmtop/pics144/firefox.png
...copying galculator.png to /opt/QtPalmtop/pics144/galculator.png
...copying gimp.png to /opt/QtPalmtop/pics144/gimp.png
...copying linux_debian.png to /opt/QtPalmtop/pics144/linux_debian.png
...copying minimo.png to /opt/QtPalmtop/pics144/minimo.png
...copying openoffice.png to /opt/QtPalmtop/pics144/openoffice.png
...copying scite.png to /opt/QtPalmtop/pics144/scite.png
...copying stardict.png to /opt/QtPalmtop/pics144/stardict.png
...copying sylpheed.png to /opt/QtPalmtop/pics144/sylpheed.png
...copying thunderbird.png to /opt/QtPalmtop/pics144/thunderbird.png
...copying xarchiver.png to /opt/QtPalmtop/pics144/xarchiver.png
...copying xchat.png to /opt/QtPalmtop/pics144/xchat.png
...copying xpdf.png to /opt/QtPalmtop/pics144/xpdf.png
...linking files to /opt/QtPalmtop/bin
...linking files to /usr/bin
...linking files to /usr/lib
...linking files to /usr/share
...linking files to /usr/local/bin
...linking files to /usr/local/share
...copying config files to /etc/gconf
...copying config files to /etc/gimp
...copying 2.0 to /etc/gimp/2.0
...copying config files to /etc/tuxpaint
...copying tuxpaint.conf to /etc/tuxpaint/tuxpaint.conf
...linking X server and config
...copying user config files to /home/zaurus
...copying .dillo to /home/zaurus/.dillo
...copying .gimp-2.3 to /home/zaurus/.gimp-2.3
...copying .xmms to /home/zaurus/.xmms
...copying .xpdfrc to /home/zaurus/.xpdfrc
...loading libraries
...generating config files
pdaXqtApps configured.
...checking for zgcc2-95-2.cramfs
zgcc2-95-2.cramfs not found.
...installing zgcc2-95-2 to /hdd3
Warning: ambiguous entry for zgcc2-95-2.squashfs found in /etc/fstab
X/Qt installed and configured (if found).
# xlauncher pdaxrom
error: please su with - or run as zaurus user
# exit
bash-2.05$ xlauncher pdaxrom
warning: sudo not found!
enabling swap /hdd3/swapfile
swapon: swapon: Operation not permitted
starting X and pdaxrom - please wait a moment...
bash-2.05$
Any suggestions???
Thanks,
Mark
Hey ArchiMark, after you uninstalled the previous version did you remimber to remove the mounts from your fstab and reboot?
[div align=\"right\"][a href=\"index.php?act=findpost&pid=124413\"][{POST_SNAPBACK}][/a][/div]
-
Well, I installed the version of wget from your feed meanie (same version as the one I had) and it works now. Thanks!
-
well archimark, your installation looks ok.
the ambiguous entries in /etc/fstab could be a problem for automounter to correctly mount the squashfs images for you, but you can manually remount the images yourself after a reboot.
you probably have an older version of automounter which is not detected. try installing a newer version of automounter, ie 0.4.7
http://www.users.on.net/~hluc/myZaurus/stuff/ (http://www.users.on.net/~hluc/myZaurus/stuff/)
the cramfs warnings are ok because you are using the squashfs images instead.
the swap error is also ok. it just means the zaurus user could not enable swap for you because you dont have sudo installed. just enable swap manually yourself as root.
now the option pdaxrom doesn't exist, just xlauncher will do
I will fix the installer script a bit to make it more obvious.
-
well archimark, your installation looks ok.
the ambiguous entries in /etc/fstab could be a problem for automounter to correctly mount the squashfs images for you, but you can manually remount the images yourself after a reboot.
you probably have an older version of automounter which is not detected. try installing a newer version of automounter, ie 0.4.7
http://www.users.on.net/~hluc/myZaurus/stuff/ (http://www.users.on.net/~hluc/myZaurus/stuff/)
the cramfs warnings are ok because you are using the squashfs images instead.
the swap error is also ok. it just means the zaurus user could not enable swap for you because you dont have sudo installed. just enable swap manually yourself as root.
now the option pdaxrom doesn't exist, just xlauncher will do
I will fix the installer script a bit to make it more obvious.
[div align=\"right\"][a href=\"index.php?act=findpost&pid=124438\"][{POST_SNAPBACK}][/a][/div]
YEY! waiting for the next one.
-
pdaXqtrom install script fixed. try again and all should be fine now (hopefully)
sudo is only needed to enable the swap for you automatically so it is not really required. just enable swap yourself
-
Slightly off topic: When you enable swap, and use it heavily, does your wifi card ever get kind of stuck? For example, I can remove the card and the wifi applet will stay in the tray and the zaurus doesn't even know it was removed. I can put it back in and still no change, except the connection LED will stay on. In this state I am not able to connect or reset the card and I have to reboot to fix it. It only happens when I have swap enabled on the hard disk.
On topic: How do I go about adding gaim and grisbi to pdaxqtrom(the only two programs I want this for and they aren't there)? Is it the same way I did it on the previous one? I can't just install them because I only have 15MB of /home left.
EDIT:: i just tried ssh and got the same error that i got with wget. dang, any ideas? i dont have the room to reinstall all my console programs.
-
Slightly off topic: When you enable swap, and use it heavily, does your wifi card ever get kind of stuck? For example, I can remove the card and the wifi applet will stay in the tray and the zaurus doesn't even know it was removed. I can put it back in and still no change, except the connection LED will stay on. In this state I am not able to connect or reset the card and I have to reboot to fix it. It only happens when I have swap enabled on the hard disk.
On topic: How do I go about adding gaim and grisbi to pdaxqtrom(the only two programs I want this for and they aren't there)? Is it the same way I did it on the previous one? I can't just install them because I only have 15MB of /home left.
EDIT:: i just tried ssh and got the same error that i got with wget. dang, any ideas? i dont have the room to reinstall all my console programs.
[div align=\"right\"][a href=\"index.php?act=findpost&pid=124449\"][{POST_SNAPBACK}][/a][/div]
well ok, just relink the libfloat.so.1 file from the rom image to /opt/QtPalmtop/lib/libfloat.so.1
eg on the c3100
ln -sf /usr/QtPalmtop.rom/lib/libfloat.so.1 /opt/QtPalmtop/lib/libfloat.so.1
please report all problems, even if you find a workaround so that it can be all included in the next update.
btw, gaim and grisbi were purposely left out because there are newer versions available which I was planning to compile, but I can put the older version on in the interim.
ok, i just did some investigation, all Cacko users will have the libfloat problem, while Sharp ROM users will be fine
I will have to write something smart in the installer for the Cacko users to leave their libfloat alone....
-
Slightly off topic: When you enable swap, and use it heavily, does your wifi card ever get kind of stuck? For example, I can remove the card and the wifi applet will stay in the tray and the zaurus doesn't even know it was removed. I can put it back in and still no change, except the connection LED will stay on. In this state I am not able to connect or reset the card and I have to reboot to fix it. It only happens when I have swap enabled on the hard disk.
On topic: How do I go about adding gaim and grisbi to pdaxqtrom(the only two programs I want this for and they aren't there)? Is it the same way I did it on the previous one? I can't just install them because I only have 15MB of /home left.
EDIT:: i just tried ssh and got the same error that i got with wget. dang, any ideas? i dont have the room to reinstall all my console programs.
[div align=\"right\"][a href=\"index.php?act=findpost&pid=124449\"][{POST_SNAPBACK}][/a][/div]
eject the wifi from the icon at the taskbar. then pull wifi out.
-
Meanie, thanks for your help...
A. Automounter
Weird thing is that I checked and I had the latest version of your automounter installed. But just to make sure I uninstalled it and reinstalled it....
B. /etc/fstab
Deleted some entries in fstab before trying to install again.
C. pdaXqtrom Install
./pdaXqtrom-install.sh
X/Qt super jumbo installer - version 0.3.6.1
automounter is installed.
stopping loop devices...
old version of automounter detected, please update
The system has 7 loop devices.
There are 3 cramfs/squashfs images.
...purging /etc/X11
...checking for pdaXqtrom-base
...installing pdaXqtrom-base to /hdd3
Can't find /hdd3/pdaXqtrom-base.squashfs in /etc/fstab
...checking for pdaXqtrom-apps
...installing pdaXqtrom-apps to /hdd3
pdaXqtApps - beta 0.7.5
Installing pdaXqtApps on borzoi...
...updating package info
...copying desktop config files to /opt/QtPalmtop/apps/XQt
...copying axyftp.desktop to /opt/QtPalmtop/apps/XQt/axyftp.desktop
...copying bluefish.desktop to /opt/QtPalmtop/apps/XQt/bluefish.desktop
...copying dia.desktop to /opt/QtPalmtop/apps/XQt/dia.desktop
...copying firefox.desktop to /opt/QtPalmtop/apps/XQt/firefox.desktop
...copying gnumeric.desktop to /opt/QtPalmtop/apps/XQt/gnumeric.desktop
...copying gqview.desktop to /opt/QtPalmtop/apps/XQt/gqview.desktop
...copying nedit.desktop to /opt/QtPalmtop/apps/XQt/nedit.desktop
...copying thunderbird.desktop to /opt/QtPalmtop/apps/XQt/thunderbird.desktop
...copying xmms.desktop to /opt/QtPalmtop/apps/XQt/xmms.desktop
...copying icons files to /opt/QtPalmtop/pics144
...copying axyftp.png to /opt/QtPalmtop/pics144/axyftp.png
...copying bluefish.png to /opt/QtPalmtop/pics144/bluefish.png
...copying bochs.png to /opt/QtPalmtop/pics144/bochs.png
...copying dia.png to /opt/QtPalmtop/pics144/dia.png
...copying firefox.png to /opt/QtPalmtop/pics144/firefox.png
...copying flfm.png to /opt/QtPalmtop/pics144/flfm.png
...copying fltdj.png to /opt/QtPalmtop/pics144/fltdj.png
...copying gnumeric.png to /opt/QtPalmtop/pics144/gnumeric.png
...copying gqview.png to /opt/QtPalmtop/pics144/gqview.png
...copying grisbi.png to /opt/QtPalmtop/pics144/grisbi.png
...copying nedit.png to /opt/QtPalmtop/pics144/nedit.png
...copying thunderbird.png to /opt/QtPalmtop/pics144/thunderbird.png
...copying vnc.png to /opt/QtPalmtop/pics144/vnc.png
...copying xmms.png to /opt/QtPalmtop/pics144/xmms.png
...linking files to /opt/QtPalmtop/bin
...linking files to /usr/bin
...linking files to /usr/lib
...linking files to /usr/share
...linking files to /usr/local/bin
...linking files to /usr/local/share
...copying config files to /etc/gconf
...copying config files to /etc/gimp
...copying config files to /etc/tuxpaint
...linking X server and config
/mnt/pdaXqtrom-apps/pdaXqtApps-setup: cannot create /etc/X11/defaultwm: directory nonexistent
...checking for zgcc2-95-2
...installing zgcc2-95-2 to /hdd3
configuring zgcc...
...zgcc is configured at /mnt/zgcc
...linking /mnt/zgcc/lib/libc.so.6 to /usr/lib/libc.so
...linking /mnt/zgcc/lib/libc_nonshared.a to /usr/lib/libc_nonshared.a
...linking /mnt/zgcc/lib/libopcodes-2.9.5.0.31.so to /opt/QtPalmtop/lib/libopcodes-2.9.5.0.31.so
...linking /mnt/zgcc/lib/libbfd-2.9.5.0.31.so to /opt/QtPalmtop/lib/libbfd-2.9.5.0.31.so
...linking /mnt/zgcc/include/Qtopia to /opt/QtPalmtop/include
...linking /mnt/zgcc/include/Qtopia to /opt/QtPalmtop/sharp/include
...linking /mnt/zgcc/bin/moc to /opt/QtPalmtop/bin/moc
...linking /mnt/zgcc/bin/uic to /opt/QtPalmtop/bin/uic
...linking /mnt/zgcc/perl/bin/perl to /usr/bin/perl
...linking /mnt/zgcc/perl/bin/perl to /usr/local/bin/perl
...linking /mnt/zgcc/perl/bin/find2perl to /usr/bin/find2perl
...linking /mnt/zgcc/perl/bin/perl-5.6 to /usr/bin/perl-5.6
...linking /mnt/zgcc/perl/bin/perl5.6.1 to /usr/bin/perl5.6.1
...linking /mnt/zgcc/perl/bin/perlbug to /usr/bin/perlbug
...linking /mnt/zgcc/perl/bin/perlcc to /usr/bin/perlcc
...linking /mnt/zgcc/perl/bin/perldoc to /usr/bin/perldoc
...linking /mnt/zgcc/perl/bin/pl2pm to /usr/bin/pl2pm
...linking /mnt/zgcc/perl/bin/pod2html to /usr/bin/pod2html
...linking /mnt/zgcc/perl/bin/pod2latex to /usr/bin/pod2latex
...linking /mnt/zgcc/perl/bin/pod2text to /usr/bin/pod2text
...linking /mnt/zgcc/perl/bin/pod2usage to /usr/bin/pod2usage
...linking /mnt/zgcc/perl/bin/podchecker to /usr/bin/podchecker
...linking /mnt/zgcc/perl/bin/podselect to /usr/bin/podselect
...linking /mnt/zgcc/perl/bin/pstruct to /usr/bin/pstruct
...linking /mnt/zgcc/perl/bin/rename to /usr/bin/rename
...linking /mnt/zgcc/perl/bin/s2p to /usr/bin/s2p
...linking /mnt/zgcc/perl/bin/splain to /usr/bin/splain
...linking /mnt/zgcc/perl/bin/xmlcatalog to /usr/bin/xmlcatalog
...linking /mnt/zgcc/perl/bin/xmllint to /usr/bin/xmllint
...linking /mnt/zgcc/perl/lib/libperl.so.5.6 to /usr/lib/libperl.so.5.6
...linking /mnt/zgcc/perl/lib/libperl.so.5.6.1 to /usr/lib/libperl.so.5.6.1
...linking /mnt/zgcc/perl/lib/libxmlparse.so to /usr/lib/libxmlparse.so
...linking /mnt/zgcc/perl/lib/perl to /usr/lib/perl
...linking /mnt/zgcc/perl/lib/perl to /usr/local/lib/perl
...linking /mnt/zgcc/perl/local/site_perl to /usr/local/lib/site_perl
...linking /mnt/zgcc/perl/share/perl to /usr/share/perl
...linking /mnt/zgcc/perl/share/perl to /usr/local/share/perl
X/Qt installed and configured (if found).
use xlauncher or the StartX icon to start it.
# xlauncher
xlauncher: not found
When I tried installing by tapping on the 'StartX' icon I got the error message:
"Unable to find this application 'startx-wrapper'. Please confirm the installed media."
I do see that there's still error messages shown during install process....
Any suggestions??
Thanks,
Mark
well archimark, your installation looks ok.
the ambiguous entries in /etc/fstab could be a problem for automounter to correctly mount the squashfs images for you, but you can manually remount the images yourself after a reboot.
you probably have an older version of automounter which is not detected. try installing a newer version of automounter, ie 0.4.7
http://www.users.on.net/~hluc/myZaurus/stuff/ (http://www.users.on.net/~hluc/myZaurus/stuff/)
the cramfs warnings are ok because you are using the squashfs images instead.
the swap error is also ok. it just means the zaurus user could not enable swap for you because you dont have sudo installed. just enable swap manually yourself as root.
now the option pdaxrom doesn't exist, just xlauncher will do
I will fix the installer script a bit to make it more obvious.
[div align=\"right\"][a href=\"index.php?act=findpost&pid=124438\"][{POST_SNAPBACK}][/a][/div]
-
it seems like pdaXqtrom-base didn't get setup this time
did it get mounted? can you manually run pdaXqtrom-base-setup?
-
it seems like pdaXqtrom-base didn't get setup this time
did it get mounted?
I don't see it listed in mount list...just see:
/dev/loop0 for pdaXqtrom-apps
/dev/loop1 for zgcc
can you manually run pdaXqtrom-base-setup?
[div align=\"right\"][a href=\"index.php?act=findpost&pid=124565\"][{POST_SNAPBACK}][/a][/div]
#mount -o loop -t squashfs /hdd3/pdaXqtrom-base.squashfs /mnt/pdaXqtrom-base
#mount
.....bunch of other mounts then
/dev/loop2 on /home/system/var/mnt/pdaXqtrom-base type squashfs (ro)
#xlauncher pdaXqtrom
error: please su with - or run as zaurus user
#exit
$ xlauncher pdaXqtrom
warning: sudo not found!
enabling swap /hdd3/swapfile
swapon: swapon: Operation not permitted
starting X and pdaXqtrom - please wait a moment...
X never opened up....did see a text message briefly in the Qtopia taskbar along the bottom of the display that said that it was "starting X and pdaXqtrom - please wait a moment..." but then it went away and nothing else happened....
Tried rebooting and then tried mounting manually again but same thing happened....
Any other thoughts???
-
I install the base and app. The Xqt doing good but I can't run the app. For example if I ran firefox it comes with this
/usr/lib/firefox/lib/firefox-1.5/firefox-bin: error while loading shared libraries: /home/QtPalmtop/lib/libgtk-x11-2.0.so.0: undefined symbol: g_option_context_new
Am I missing something?
-
archimark: you need to run pdaXqtrom-base-setup after you mount the image. it hasn't been run yet.
kenko: where is /home/QtPalmtop/lib/libgtk-x11-2.0.so.0 linked to? did you have an older version of glib2 and gtk2 previously installed?
-
well ok, just relink the libfloat.so.1 file from the rom image to /opt/QtPalmtop/lib/libfloat.so.1
eg on the c3100
ln -sf /usr/QtPalmtop.rom/lib/libfloat.so.1 /opt/QtPalmtop/lib/libfloat.so.1
please report all problems, even if you find a workaround so that it can be all included in the next update.
ok, i just did some investigation, all Cacko users will have the libfloat problem, while Sharp ROM users will be fine
I will have to write something smart in the installer for the Cacko users to leave their libfloat alone....
[div align=\"right\"][a href=\"index.php?act=findpost&pid=124465\"][{POST_SNAPBACK}][/a][/div]
I just downloaded pdaXqtrom-base.cramfs and pdaXqtrom-install.zip last night (4-26-06)
I'm using Cacko Lite, has the libfloat problem been fixed?
Thank you
Jon
-
archimark: you need to run pdaXqtrom-base-setup after you mount the image. it hasn't been run yet.
Thanks, Meanie...but...
I've mounted the image manually and then tried:
#pdaXqtrom-base-setup
pdaXqtrom-base-setup: not found
So how do I run the pdaXqtrom-base-setup?
I'm located in /hdd3 where I mounted the image files...
Thanks,
Mark
-
UPDATE:
OK, figured out how to run pdaXqtrom-base-setup....
then did
$xlauncher pdaXqtrom
warning: sudo not found!
starting X and pdaXqtrom - please wait a moment....
This time X window opened!!
But that's all I get is the X window with that gray bar at the top of the display....no pdaXrom that I see....
What now???
Thanks,
Mark
-
I installed it and seems fine, but the fluxbox is plain, no theme, and no Styles available from the dropdown menu.
This is what it looks like. [ You are not allowed to view attachments ]
What's the problem?
-
what's inside /etc/X11?
-
what's inside /etc/X11?
[div align=\"right\"][a href=\"index.php?act=findpost&pid=124699\"][{POST_SNAPBACK}][/a][/div]
/etc/X11/:
app-defaults
defaultwm
kb
proxymngr
rstart
twm
xdm
xinit
xserver
xsm
/etc/X11/app-defaults:
Bitmap
Bitmap-color
Chooser
Clock-color
Editres
Editres-color
Mwm
UXTerm
Viewres
XCalc
XCalc-color
XClipboard
XClock
XConsole
XFontSel
XLoad
XLogo
XLogo-color
XSm
XTerm
XTerm-color
Xditview
Xditview-chrtr
Xedit
Xedit-color
Xfd
Xgc
Xmag
Xman
Xmessage
Xmessage-color
Xmh
/etc/X11/kb:
xmodmaprc
/etc/X11/proxymngr:
pmconfig
/etc/X11/rstart:
commands
config
contexts
rstartd.real
/etc/X11/rstart/commands:
@List
ListContexts
ListGenericCommands
x
x11
x11r6
/etc/X11/rstart/commands/x11r6:
@List
LoadMonitor
Terminal
/etc/X11/rstart/contexts:
@List
default
x
x11
x11r6
/etc/X11/twm:
system.twmrc
/etc/X11/xdm:
GiveConsole
TakeConsole
Xaccess
Xresources
Xservers
Xsession
Xsetup_0
Xwilling
authdir
chooser
pixmaps
xdm-config
/etc/X11/xdm/pixmaps:
XFree86.xpm
XFree86bw.xpm
/etc/X11/xinit:
xinitrc
xserverrc
/etc/X11/xserver:
/etc/X11/xsm:
system.xsm
-
Just realized from your post, ShiroiKuma that I have basically similar looking situation right now...I just did "xlauncher aterm" and it opened so now if I did screenshot it would look like yours except I have gradient black to almost white background on display....
So how do you open up pdaXqtrom or is this it??? ...thought this is just X ??.....
Thanks,
Mark
-
archimark: you need to run pdaXqtrom-base-setup after you mount the image. it hasn't been run yet.
kenko: where is /home/QtPalmtop/lib/libgtk-x11-2.0.so.0 linked to? did you have an older version of glib2 and gtk2 previously installed?
[div align=\"right\"][a href=\"index.php?act=findpost&pid=124597\"][{POST_SNAPBACK}][/a][/div]
It link to /mnt/pdaXqtrom-base/opt/QtPalmtop/lib/libgtk-x11-2.0.so.0 and eventaully link to libgtk-x11-2.0.so.0.600.2 under the same directory.
I'm using Cacko 1.23 and didn't change anything. I didn't know if the glib2/gtk2 are older version but I don't think so.
Thanks for helping.
~kenko
-
archimark: you need to run pdaXqtrom-base-setup after you mount the image. it hasn't been run yet.
kenko: where is /home/QtPalmtop/lib/libgtk-x11-2.0.so.0 linked to? did you have an older version of glib2 and gtk2 previously installed?
[div align=\"right\"][a href=\"index.php?act=findpost&pid=124597\"][{POST_SNAPBACK}][/a][/div]
It link to /mnt/pdaXqtrom-base/opt/QtPalmtop/lib/libgtk-x11-2.0.so.0 and eventaully link to libgtk-x11-2.0.so.0.600.2 under the same directory.
I'm using Cacko 1.23 and didn't change anything. I didn't know if the glib2/gtk2 are older version but I don't think so.
Thanks for helping.
~kenko
[div align=\"right\"][a href=\"index.php?act=findpost&pid=124724\"][{POST_SNAPBACK}][/a][/div]
that's an old library from the original xqt packages. which images did you download? maybe if you wait a day or two, I am going to upload some new images with several bug fixes and enhancements.
archimark: this is an updated X/Qt package that runs the latest pdaXrom applications, it is not pdaXrom. The libraries in this package have been updated to use the same version as the ones provided by pdaXrom so the same versions of applications as pdaXrom can be run but they all need to be specially compiled for X/Qt. The old version of X/Qt could not run the newer pdaXrom apps, but only the very old pdaXrom 1.0 apps, ie firefox 0.9, gimp 1.25, gnumeric 1.2. This version allows you to run pdaXrom 1.1.0 apps (if they have been recompiled for xqt), ie firefox 1.5, gnumeric 1.6, gimp 2.3, etc...
-
Aaaahhh, now I get it, Meanie!!!
Thanks for explaining.....
Mark
archimark: this is an updated X/Qt package that runs the latest pdaXrom applications, it is not pdaXrom. The libraries in this package have been updated to use the same version as the ones provided by pdaXrom so the same versions of applications as pdaXrom can be run but they all need to be specially compiled for X/Qt. The old version of X/Qt could not run the newer pdaXrom apps, but only the very old pdaXrom 1.0 apps, ie firefox 0.9, gimp 1.25, gnumeric 1.2. This version allows you to run pdaXrom 1.1.0 apps (if they have been recompiled for xqt), ie firefox 1.5, gnumeric 1.6, gimp 2.3, etc...
[div align=\"right\"][a href=\"index.php?act=findpost&pid=124730\"][{POST_SNAPBACK}][/a][/div]
-
oh by the way, there is an xlauncher -debug option so you can see entries in the terminal of what happens and what errors occur
once it runs ok from the terminal, it should run fine also from the Qtopia menu. but if it does not, let me know so I can fix it.
-
Meanie, on your pdaXqtrom page you say:
FluxBox menu is activated by holding the Fn key and tapping on the desktop. To release/cancel from the menu, tap anywhere on the desktop (but not on any window/application on the desktop).
I can get the FluxBox menu OK...but when I got further into the submenus I can't seem to get them to go away...tried various ways, but no go... how do you get rid of them ?, there's no closebox button either.....
Otherwise, things seem be working OK now, apps seem to open OK so far....
Thanks!
Mark
-
Fn + click the titlebar of the submenus.
That made them close for me.
Also, some settings options don't seem to have a method to make them close, for these, I used my cancel button, then they closed.
I have since uninstalled pdaXqtrom. I'm waiting for a response about the automounter.
EDIT: Meanie, I didn't install the automounter. I heard Cacko already has an automounter.
(I had probs with automounter in Cacko in earlier install of X/Qt-jumbo package)
See here:
https://www.oesf.org/forums/index.php?showt...ndpost&p=124685 (https://www.oesf.org/forums/index.php?showtopic=19084&view=findpost&p=124685)
-
Fn + click the titlebar of the submenus.
That made them close for me.
Also, some settings options don't seem to have a method to make them close, for these, I used my cancel button, then they closed.
I have since uninstalled pdaXqtrom. I'm waiting for a response about the automounter.
EDIT: Meanie, I didn't install the automounter. I heard Cacko already has an automounter.
(I had probs with automounter in Cacko in earlier install of X/Qt-jumbo package)
See here:
https://www.oesf.org/forums/index.php?showt...ndpost&p=124685 (https://www.oesf.org/forums/index.php?showtopic=19084&view=findpost&p=124685)
[div align=\"right\"][a href=\"index.php?act=findpost&pid=124743\"][{POST_SNAPBACK}][/a][/div]
the only difference in auto mounting between Cacko and Sharp ROM is that Cacko has a simple usb-storage script while Sharp ROM does not by default
-
I'll just reply to this thread since everyone seems to read this one first.
I have a 128mb swapfile, isn't that large enough for Abiword?
My images that I tried to browse in GQview are mostly *.jpg and *.png
I've enclosed screenshots of the directory in Bash and in GQview.
The files are there, but GQview doesn't "see" them
Thank you.
I'll check into abiword, maybe it just needs more memory because it is a big app after all.
I don't think the problem with GQview has anything to do with the file system. Maybe its a filter. What type of images do you have?
automounter is for mounting the cramfs/squashfs images for you automatically upon reboot and also for creating extra loop devices. the installer creates extra loop devices for you as well, thus it can mount the loop devices for you. however, when you reboot, the extra loop devices are gone. auto mounter recreates them for you during boot and also mounts the devices for you. Cacko, and even Sharp ROM both automatically mount the loop devices for you if they are present in /etc/fstab, but they only mount the first 2 and then run out of loop devices. automounter then creates more loop devices and mounts all the left over entries that were not previously mounted and automounter also carefully checks which entries had already been mounted and won't mount them again. Previous versions of automounter had problem on Cacko, because it also unmounted Cacko's internal loop device when you ran automounter stop. The latest version, 0.4.7 fixes this, and it also makes a backup of the usb-storage file prior to installation so when you uninstall automounter it is able to restore the usb-storage script. In the previous versions, the installer/uninstaller program just removed usb-storage.
/etc/rc.d/init.d/mntloop is now linked to /usr/bin/automounter so you can just run
automounter stop/start
[div align=\"right\"][a href=\"index.php?act=findpost&pid=124747\"][{POST_SNAPBACK}][/a][/div]
-
archimark: you need to run pdaXqtrom-base-setup after you mount the image. it hasn't been run yet.
kenko: where is /home/QtPalmtop/lib/libgtk-x11-2.0.so.0 linked to? did you have an older version of glib2 and gtk2 previously installed?
[div align=\"right\"][a href=\"index.php?act=findpost&pid=124597\"][{POST_SNAPBACK}][/a][/div]
It link to /mnt/pdaXqtrom-base/opt/QtPalmtop/lib/libgtk-x11-2.0.so.0 and eventaully link to libgtk-x11-2.0.so.0.600.2 under the same directory.
I'm using Cacko 1.23 and didn't change anything. I didn't know if the glib2/gtk2 are older version but I don't think so.
Thanks for helping.
~kenko
[div align=\"right\"][a href=\"index.php?act=findpost&pid=124724\"][{POST_SNAPBACK}][/a][/div]
that's an old library from the original xqt packages. which images did you download? maybe if you wait a day or two, I am going to upload some new images with several bug fixes and enhancements.
archimark: this is an updated X/Qt package that runs the latest pdaXrom applications, it is not pdaXrom. The libraries in this package have been updated to use the same version as the ones provided by pdaXrom so the same versions of applications as pdaXrom can be run but they all need to be specially compiled for X/Qt. The old version of X/Qt could not run the newer pdaXrom apps, but only the very old pdaXrom 1.0 apps, ie firefox 0.9, gimp 1.25, gnumeric 1.2. This version allows you to run pdaXrom 1.1.0 apps (if they have been recompiled for xqt), ie firefox 1.5, gnumeric 1.6, gimp 2.3, etc...
[div align=\"right\"][a href=\"index.php?act=findpost&pid=124730\"][{POST_SNAPBACK}][/a][/div]
I check from the Package Manager the pdaXqtrom-base version is 0.4.6-0.7.5. I'm looking forward of your next update. Thanks a lot.
~kenko
-
X/Qt jumbo is now deprecated and not being updated anymore. Instead there is now X/Qt super jumbo aka pdaXqtrom. This new package is installed just like the jumbo cramfs images. The pdaXqtrom-base image replaces the xqt-gtk-jumbo image. The squashfs images have been uploaded, the cramfs images will follow shortly.
http://zaurus.daemons.gr/menaie/mirror/jum....html#pdaxqtrom (http://zaurus.daemons.gr/menaie/mirror/jumbo/xqtjumbo.html#pdaxqtrom)
Note: not all items on the menu are installed yet, but they will be in the next release. This release is for general testing to iron out bugs and see how well it works on other models apart from the C3x00 series. Check out the keyboard mappings and send me your fixes in case some keys are wrong since I am unable to test the keyboard mappings on other models except the ones I have. The SL-6000 should also work fine. Let me know about the window sizings.
[div align=\"right\"][a href=\"index.php?act=findpost&pid=124229\"][{POST_SNAPBACK}][/a][/div]
Hi Meanie,
looks like another great piece of work you have done!
One question:
I actually only need Gnumeric under QTopia. Is your super jumbo the thing I need for that?
thanks
daniel
-
what's inside /etc/X11?
[div align=\"right\"][a href=\"index.php?act=findpost&pid=124699\"][{POST_SNAPBACK}][/a][/div]
OK, I think it's actually fluxbox, I just checked and see that ~/.fluxbox/styles is empty
This is because /mnt/pdaxqtrom-base/home/zaurus/.fluxbox/styles is empty. Is this the reason?
-
I installed it and seems fine, but the fluxbox is plain, no theme, and no Styles available from the dropdown menu.
This is what it looks like. [ You are not allowed to view attachments ]
What's the problem?
[div align=\"right\"][a href=\"index.php?act=findpost&pid=124698\"][{POST_SNAPBACK}][/a][/div]
I figured it out. The reason was that the pdaxqtrom setup script didn't symlink the /opt/QtPalmtop/share/fluxbox/styles directory.
Did it manually and all's fine.
Meanie, this what you've done is unbelievable. A great breakthrough. Thank you very much.
-
Yep, that did it, Jon_J !!
Thanks for the advice!
Mark
Fn + click the titlebar of the submenus.
That made them close for me.
Also, some settings options don't seem to have a method to make them close, for these, I used my cancel button, then they closed.
I have since uninstalled pdaXqtrom. I'm waiting for a response about the automounter.
-
eject the wifi from the icon at the taskbar. then pull wifi out.
[div align=\"right\"][a href=\"index.php?act=findpost&pid=124469\"][{POST_SNAPBACK}][/a][/div]
Note:
In this state I am not able to connect or reset the card and I have to reboot to fix it. It only happens when I have swap enabled on the hard disk.
The icon just reports "failed to eject card." I guess you haven't had this problem. It's very strange.
Oh, and relinking that libfloat didn't correct the problem I am having with console apps.
-
Is the ShowDesktopIcons option disabled in the included version of Fluxbox?
At least when I click it it doesn't seem to be doing anything...
-
Is the ShowDesktopIcons option disabled in the included version of Fluxbox?
At least when I click it it doesn't seem to be doing anything...
[div align=\"right\"][a href=\"index.php?act=findpost&pid=124912\"][{POST_SNAPBACK}][/a][/div]
yeah, it is not implemented yet
xamindar: did you run ldconfig to refresh the cache? otherwise you will still be using the old cached version of libfloat
-
xamindar: did you run ldconfig to refresh the cache? otherwise you will still be using the old cached version of libfloat
[div align=\"right\"][a href=\"index.php?act=findpost&pid=124917\"][{POST_SNAPBACK}][/a][/div]
Yeah, it still does it.
EDIT: A few console apps continued to give me "undefined symbol: __umodsi3" so I decided to remove pdaxqtrom for the moment. When it is removed, a few libraries under /usr/lib.rom/ are not relinked so I had to do it manually. libcrypto and libssl so far. There might be more. Also, when I reboot now, the big blue cacko splash screen no longer shows right before I enter qtoopia.
-
Hi Meanie
well, first, thanks for all your work
I'm running cacko on 860 and I have few problems with pdaXqtrom
I'm running the last version of your squashfs image (base and apps), and I can't run gnumeric or firefox 1.5
When I try to open them through qtopia i don't see the error, so I do open Xqt throught the icon your instalation did create "Start X"
Then, when I try to run firefox or gnumeric, I get this error :
/usr/lib/firefox/lib/firefox-1.5/firefox-bin: error while loading shared libraries: /home/QtPalmtop/lib/libpangoft2-1.0.so.0: undefined symbol: g_type_class_add_private
(replace with gnumeric-1.6.0 for the error with gnumeric)
I manage to run few xqt apps, including XMMS and firefox 0.9...
Hope i can run gnumeric soon
-
Hi Meanie
well, first, thanks for all your work
I'm running cacko on 860 and I have few problems with pdaXqtrom
I'm running the last version of your squashfs image (base and apps), and I can't run gnumeric or firefox 1.5
When I try to open them through qtopia i don't see the error, so I do open Xqt throught the icon your instalation did create "Start X"
Then, when I try to run firefox or gnumeric, I get this error :
/usr/lib/firefox/lib/firefox-1.5/firefox-bin: error while loading shared libraries: /home/QtPalmtop/lib/libpangoft2-1.0.so.0: undefined symbol: g_type_class_add_private
(replace with gnumeric-1.6.0 for the error with gnumeric)
I manage to run few xqt apps, including XMMS and firefox 0.9...
Hope i can run gnumeric soon
[div align=\"right\"][a href=\"index.php?act=findpost&pid=126061\"][{POST_SNAPBACK}][/a][/div]
it seems like a lot of people using Cacko have glib problems whereas Sharp ROM users don't. Can someone who has problems give me the output for
ls -la /usr/lib/libglib*
ls -la /opt/QtPalmtop/lib/libglib*
-
it seems like a lot of people using Cacko have glib problems whereas Sharp ROM users don't. Can someone who has problems give me the output for
ls -la /usr/lib/libglib*
ls -la /opt/QtPalmtop/lib/libglib*[div align=\"right\"][a href=\"index.php?act=findpost&pid=126072\"][{POST_SNAPBACK}][/a][/div]
Hello MEANIE
Yes it seems to be the same problem for me,thurifer13, Dreyman
and We all are using cacko 1.23 lite (not sharp rom), i also installed cacko 1.23full maybe some files are missing in the light version but the results was the same
gdkbixbuf and local c warnings even after adding
export LC_ALL=C
export LANGUAGE=C
and i did also what you asked thurifer13 to do (launching xqt cleanup, removing all libglib* files, and launching again the setup scripts
no thing happen
and the only thing that i have when launching abiword is blank screen
some other applications such as SciTE and dia are also not working but it seems to be the same problem than abiword
any way here is the outpout you asked, after installing the second release of pdaXqtrom
#ls -la /usr/lib/libglib*
lrwxrwxrwx 1 root root 21 May 4 13:54
/usr/lib/libglib-1.2.so.0 -> libglib-1.2.so.0.0.10
lrwxrwxrwx 1 root root 34 May 4 13:54
/usr/lib/libglib-1.2.so.0.0.10 -> /usr/lib.rom/libglib-1.2.so.0.0.10
# ls -la /opt/QtPalmtop/lib/libglib*
lrwxrwxrwx 1 root root 63 May 4 14:07
/opt/QtPalmtop/lib/libglib-2.0.so ->
/usr/mnt.rom/cf/pdaXqtrom-base/opt/QtPalmtop/lib/libglib-2.0.so
lrwxrwxrwx 1 root root 65 May 4 14:07
/opt/QtPalmtop/lib/libglib-2.0.so.0 ->
/usr/mnt.rom/cf/pdaXqtrom-base/opt/QtPalmtop/lib/libglib-2.0.so.0
lrwxrwxrwx 1 root root 71 May 4 14:07
/opt/QtPalmtop/lib/libglib-2.0.so.0.800.1 ->
/usr/mnt.rom/cf/pdaXqtrom-base/opt/QtPalmtop/lib/libglib-2.0.so.0.800.1hope this can help
i will post some more information later
freebird
-
it seems like a lot of people using Cacko have glib problems whereas Sharp ROM users don't. Can someone who has problems give me the output for
ls -la /usr/lib/libglib*
ls -la /opt/QtPalmtop/lib/libglib*[div align=\"right\"][a href=\"index.php?act=findpost&pid=126072\"][{POST_SNAPBACK}][/a][/div]
Hello MEANIE
Yes it seems to be the same problem for me,thurifer13, Dreyman
and We all are using cacko 1.23 lite (not sharp rom), i also installed cacko 1.23full maybe some files are missing in the light version but the results was the same
gdkbixbuf and local c warnings even after adding
export LC_ALL=C
export LANGUAGE=C
and i did also what you asked thurifer13 to do (launching xqt cleanup, removing all libglib* files, and launching again the setup scripts
no thing happen
and the only thing that i have when launching abiword is blank screen
some other applications such as SciTE and dia are also not working but it seems to be the same problem than abiword
any way here is the outpout you asked, after installing the second release of pdaXqtrom
#ls -la /usr/lib/libglib*
lrwxrwxrwx 1 root root 21 May 4 13:54
/usr/lib/libglib-1.2.so.0 -> libglib-1.2.so.0.0.10
lrwxrwxrwx 1 root root 34 May 4 13:54
/usr/lib/libglib-1.2.so.0.0.10 -> /usr/lib.rom/libglib-1.2.so.0.0.10
# ls -la /opt/QtPalmtop/lib/libglib*
lrwxrwxrwx 1 root root 63 May 4 14:07
/opt/QtPalmtop/lib/libglib-2.0.so ->
/usr/mnt.rom/cf/pdaXqtrom-base/opt/QtPalmtop/lib/libglib-2.0.so
lrwxrwxrwx 1 root root 65 May 4 14:07
/opt/QtPalmtop/lib/libglib-2.0.so.0 ->
/usr/mnt.rom/cf/pdaXqtrom-base/opt/QtPalmtop/lib/libglib-2.0.so.0
lrwxrwxrwx 1 root root 71 May 4 14:07
/opt/QtPalmtop/lib/libglib-2.0.so.0.800.1 ->
/usr/mnt.rom/cf/pdaXqtrom-base/opt/QtPalmtop/lib/libglib-2.0.so.0.800.1hope this can help
i will post some more information later
freebird
[div align=\"right\"][a href=\"index.php?act=findpost&pid=126099\"][{POST_SNAPBACK}][/a][/div]
hmm, do you have a file /usr/lib/libgcc_s.so.1 ?
if so, try renaming it to libgcc_so.bak and then do a ldconfig and see if that fixes it.
-
hmm, do you have a file /usr/lib/libgcc_s.so.1 ?
if so, try renaming it to libgcc_so.bak and then do a ldconfig and see if that fixes it.
[div align=\"right\"][a href=\"index.php?act=findpost&pid=126122\"][{POST_SNAPBACK}][/a][/div]
yes i do have
renamed ok
if do ldconfig means type on the consolde ldconfig: done ok
same warning after launching abiword !!!
reinstalled pdaXqtrom-base an apps
same warning after launching abiword !!!
freebird
-
hmm, do you have a file /usr/lib/libgcc_s.so.1 ?
if so, try renaming it to libgcc_so.bak and then do a ldconfig and see if that fixes it.
[div align=\"right\"][a href=\"index.php?act=findpost&pid=126122\"][{POST_SNAPBACK}][/a][/div]
yes i do have
renamed ok
if do ldconfig means type on the consolde ldconfig: done ok
same warning after launching abiword !!!
reinstalled pdaXqtrom-base an apps
same warning after launching abiword !!!
freebird
[div align=\"right\"][a href=\"index.php?act=findpost&pid=126136\"][{POST_SNAPBACK}][/a][/div]
can you paste the error message you are getting now?
-
hmm, do you have a file /usr/lib/libgcc_s.so.1 ?
if so, try renaming it to libgcc_so.bak and then do a ldconfig and see if that fixes it.
[div align=\"right\"][a href=\"index.php?act=findpost&pid=126122\"][{POST_SNAPBACK}][/a][/div]
yes i do have
renamed ok
if do ldconfig means type on the consolde ldconfig: done ok
same warning after launching abiword !!!
reinstalled pdaXqtrom-base an apps
same warning after launching abiword !!!
freebird
[div align=\"right\"][a href=\"index.php?act=findpost&pid=126136\"][{POST_SNAPBACK}][/a][/div]
can you paste the error message you are getting now?
[div align=\"right\"][a href=\"index.php?act=findpost&pid=126138\"][{POST_SNAPBACK}][/a][/div]
i am getting these messages the same than before you add the two export commands
$xlauncher abiword
launching abiword - please wait a moment...
(process:1734): Gdk-WARNING **: locale not supported by C library
(abiword:1734): Gtk-WARNING **: locale not supported by C library.
Using the fallback 'C' locale.
(abiword:1734):GdkPixbuf-WARNING **: Error loading XPM image loader: image type 'xpm' is not supported
(abiword:1734):Gtk-CRITICAL **: gtk_icon_set_new_from_pixbuf: assertion 'pixbuf !=NULL' failed
(abiword:1734):Gtk-CRITICAL **: gtk_icon_factory_add: assertion 'icon_set != NULL' failed
(abiword:1734):Gtk-CRITICAL **: gtk_icon_set_unref: assertion 'icon_set != NULL' failed
-
hmm, do you have a file /usr/lib/libgcc_s.so.1 ?
if so, try renaming it to libgcc_so.bak and then do a ldconfig and see if that fixes it.
[div align=\"right\"][a href=\"index.php?act=findpost&pid=126122\"][{POST_SNAPBACK}][/a][/div]
yes i do have
renamed ok
if do ldconfig means type on the consolde ldconfig: done ok
same warning after launching abiword !!!
reinstalled pdaXqtrom-base an apps
same warning after launching abiword !!!
freebird
[div align=\"right\"][a href=\"index.php?act=findpost&pid=126136\"][{POST_SNAPBACK}][/a][/div]
can you paste the error message you are getting now?
[div align=\"right\"][a href=\"index.php?act=findpost&pid=126138\"][{POST_SNAPBACK}][/a][/div]
i am getting these messages the same than before you add the two export commands
$xlauncher abiword
launching abiword - please wait a moment...
(process:1734): Gdk-WARNING **: locale not supported by C library
(abiword:1734): Gtk-WARNING **: locale not supported by C library.
Using the fallback 'C' locale.
(abiword:1734):GdkPixbuf-WARNING **: Error loading XPM image loader: image type 'xpm' is not supported
(abiword:1734):Gtk-CRITICAL **: gtk_icon_set_new_from_pixbuf: assertion 'pixbuf !=NULL' failed
(abiword:1734):Gtk-CRITICAL **: gtk_icon_factory_add: assertion 'icon_set != NULL' failed
(abiword:1734):Gtk-CRITICAL **: gtk_icon_set_unref: assertion 'icon_set != NULL' failed[div align=\"right\"][a href=\"index.php?act=findpost&pid=126144\"][{POST_SNAPBACK}][/a][/div]
can you provide the output for
env
-
can you provide the output for
env[div align=\"right\"][a href=\"index.php?act=findpost&pid=126210\"][{POST_SNAPBACK}][/a][/div]
as i am newbie in linux world
i don't knew what this instruction mea, i have type it in both terminals xqt and cacko
here are the outpouts
from pdaXqtrom console
LAUNCH=aterm
CONSOLE=/dev/console
SHELL=/bin/bash
TERM=xterm
WINDOWID=4194306
QTDIR=/home/QtPalmtop
RES_OPTIONS=insecure1
QPEGROUP=qpe
LOGO=1
UNICODEMAP=cp866
USER=zaurus
LD_LIBRARY_PATH=/home/QtPalmtop/lib
INIT_VERSION=sysvinit-2.85
PATH=/home/QtPalmtop/bin:/root/bin:/bin:/sbin:/usr/bin:/usr/sbin:/usr/local/bin
RUNLEVEL=5
PWD=/home/zaurus
XMODIFIERS=@im=SCIM
LANG=en_US
TZ=America/New_York
PREVLEVEL=N
SHLVL=1
COLORFGBG=0;15
HOME=/home/zaurus
G_FILENAME_ENCODING=@locale
LOGNAME=zaurus
CRL_DIC_PATH=/home/QtPalmtop/dic
QPEDIR=/home/QtPalmtop
DISPLAY=:0.0
QWS_DISPLAY=Transformed:Rot270:Vga:0
QPEUSER=zaurus
XAUTHORITY=/home/zaurus/.Xauthority
COLORTERM=rxvt
_=/usr/bin/envfrom cacko console
LAUNCH=q
CONSOLE=/dev/console
SHELL=/bin/bash
TERM=vt100
QTDIR=/home/QtPalmtop
QPEGROUP=qpe
LOGO=1
LC_ALL=C
USER=zaurus
UNICODEMAP=cp866
INIT_VERSION=sysvinit-2.85
PATH=/root/bin:/bin:/sbin:/usr/bin:/usr/sbin:/usr/local/bin:/home/QtPalmtop/bin
RUNLEVEL=5
PWD=/usr/lib
LANG=en
TZ=America/New_York
PREVLEVEL=N
PS1=\[\033]2;\w\007\]\$
SHLVL=3
HOME=/home/root
LANGUAGE=C
LOGNAME=zaurus
OPERA_DIR=/home/QtPalmtop/opera
CRL_DIC_PATH=/home/QtPalmtop/dic
QPEDIR=/home/QtPalmtop
QWS_DISPLAY=Transformed:Rot270:Vga:0
QPEUSER=zaurus
HISTFILE=/home/zaurus/.bash_history
COLORTERM=0
_=/usr/bin/envhope this can help
Freebird
-
yes, that was helpful. thanks.
i think i know what is wrong. can you tell me what is inside the file /etc/gtk-2.0/gdk-pixbuf.loaders ?
-
yes, that was helpful. thanks.
i think i know what is wrong. can you tell me what is inside the file /etc/gtk-2.0/gdk-pixbuf.loaders ?
[div align=\"right\"][a href=\"index.php?act=findpost&pid=126255\"][{POST_SNAPBACK}][/a][/div]
this what is inside
# GdkPixbuf Image Loader Modules file
# Automatically generated file, do not edit
# Created by gdk-pixbuf-query-loaders from gtk+-2.6.2
#
# LoaderDir = /usr/lib/gtk-2.0/2.4.0/loaders
#
-
yes, that was helpful. thanks.
i think i know what is wrong. can you tell me what is inside the file /etc/gtk-2.0/gdk-pixbuf.loaders ?
[div align=\"right\"][a href=\"index.php?act=findpost&pid=126255\"][{POST_SNAPBACK}][/a][/div]
this what is inside
# GdkPixbuf Image Loader Modules file
# Automatically generated file, do not edit
# Created by gdk-pixbuf-query-loaders from gtk+-2.6.2
#
# LoaderDir = /usr/lib/gtk-2.0/2.4.0/loaders
#[div align=\"right\"][a href=\"index.php?act=findpost&pid=126260\"][{POST_SNAPBACK}][/a][/div]
good. that's what I thought.
here is how you can fix it, in a console type the following:
su
ln -sf /opt/QtPalmtop/lib/gtk-2.0 /usr/lib/gtk-2.0
gdk-pixbuf-query-loaders > /etc/gtk-2.0/gdk-pixbuf.loaders
-
yes, that was helpful. thanks.
i think i know what is wrong. can you tell me what is inside the file /etc/gtk-2.0/gdk-pixbuf.loaders ?
[div align=\"right\"][a href=\"index.php?act=findpost&pid=126255\"][{POST_SNAPBACK}][/a][/div]
this what is inside
# GdkPixbuf Image Loader Modules file
# Automatically generated file, do not edit
# Created by gdk-pixbuf-query-loaders from gtk+-2.6.2
#
# LoaderDir = /usr/lib/gtk-2.0/2.4.0/loaders
#[div align=\"right\"][a href=\"index.php?act=findpost&pid=126260\"][{POST_SNAPBACK}][/a][/div]
good. that's what I thought.
here is how you can fix it, in a console type the following:
su
ln -sf /opt/QtPalmtop/lib/gtk-2.0 /usr/lib/gtk-2.0
gdk-pixbuf-query-loaders > /etc/gtk-2.0/gdk-pixbuf.loaders[div align=\"right\"][a href=\"index.php?act=findpost&pid=126265\"][{POST_SNAPBACK}][/a][/div]
MEANIE you are close to the solution
Now in stead of blank screen abiword goes till opening untitled document, shows
some icons then closes
noticed that have still the language C warning
then i have closed xqt, to launch it again
but now i can't open xqt
and cacko takes too much time to reboot
-
yes, that was helpful. thanks.
i think i know what is wrong. can you tell me what is inside the file /etc/gtk-2.0/gdk-pixbuf.loaders ?
[div align=\"right\"][a href=\"index.php?act=findpost&pid=126255\"][{POST_SNAPBACK}][/a][/div]
this what is inside
# GdkPixbuf Image Loader Modules file
# Automatically generated file, do not edit
# Created by gdk-pixbuf-query-loaders from gtk+-2.6.2
#
# LoaderDir = /usr/lib/gtk-2.0/2.4.0/loaders
#[div align=\"right\"][a href=\"index.php?act=findpost&pid=126260\"][{POST_SNAPBACK}][/a][/div]
good. that's what I thought.
here is how you can fix it, in a console type the following:
su
ln -sf /opt/QtPalmtop/lib/gtk-2.0 /usr/lib/gtk-2.0
gdk-pixbuf-query-loaders > /etc/gtk-2.0/gdk-pixbuf.loaders[div align=\"right\"][a href=\"index.php?act=findpost&pid=126265\"][{POST_SNAPBACK}][/a][/div]
MEANIE your close to the solution
Now in stead of blank screen abiword goes till opening untitled document, shows
some icons then closes
noticed that have still the language C warning
then i have closed xqt, to try to launch it again
but now i can't open xqt
and cacko takes too much time to reboot
may be i have lauch pdaxqtrom setup again and if yes shall i do the above tweking one more time
[div align=\"right\"][a href=\"index.php?act=findpost&pid=126277\"][{POST_SNAPBACK}][/a][/div]
as a temporary workaround, you can try the following before running xlauncher
export LANG=ja
it will be properly fixed in the next version, ie I will add an english locale
-
i compiled jamvm 1.4.2 for xqt which means you will be able to run Java 1.4.x apps!
-
i compiled jamvm 1.4.2 for xqt which means you will be able to run Java 1.4.x apps!
[div align=\"right\"][a href=\"index.php?act=findpost&pid=126618\"][{POST_SNAPBACK}][/a][/div]
Wow one more success
BRAVO
-
I also recompiled libstd++so.6.0.3 with statically linked math libraries so there shoud be no more missing floating stuff like missing __udiv errors etc... so Cacko users should have no more problems
-
yes, that was helpful. thanks.
i think i know what is wrong. can you tell me what is inside the file /etc/gtk-2.0/gdk-pixbuf.loaders ?
[div align=\"right\"][a href=\"index.php?act=findpost&pid=126255\"][{POST_SNAPBACK}][/a][/div]
this what is inside
# GdkPixbuf Image Loader Modules file
# Automatically generated file, do not edit
# Created by gdk-pixbuf-query-loaders from gtk+-2.6.2
#
# LoaderDir = /usr/lib/gtk-2.0/2.4.0/loaders
#[div align=\"right\"][a href=\"index.php?act=findpost&pid=126260\"][{POST_SNAPBACK}][/a][/div]
good. that's what I thought.
here is how you can fix it, in a console type the following:
su
ln -sf /opt/QtPalmtop/lib/gtk-2.0 /usr/lib/gtk-2.0
gdk-pixbuf-query-loaders > /etc/gtk-2.0/gdk-pixbuf.loaders[div align=\"right\"][a href=\"index.php?act=findpost&pid=126265\"][{POST_SNAPBACK}][/a][/div]
MEANIE your close to the solution
Now in stead of blank screen abiword goes till opening untitled document, shows
some icons then closes
noticed that have still the language C warning
then i have closed xqt, to try to launch it again
but now i can't open xqt
and cacko takes too much time to reboot
may be i have lauch pdaxqtrom setup again and if yes shall i do the above tweking one more time
[div align=\"right\"][a href=\"index.php?act=findpost&pid=126277\"][{POST_SNAPBACK}][/a][/div]
as a temporary workaround, you can try the following before running xlauncher
export LANG=ja
it will be properly fixed in the next version, ie I will add an english locale
[div align=\"right\"][a href=\"index.php?act=findpost&pid=126279\"][{POST_SNAPBACK}][/a][/div]
HI ALL
MEANIE when do you expect to release the new pdaXqtrom version with english local supported ?
-
It's ready for testing. I uploaded the cramfs version first this time. The squashfs version will be available shortly once it has finished uploading...
http://www.thegrinder.ws/Meanies_XQT/pdaxq.../pdaxqtrom.html (http://www.thegrinder.ws/Meanies_XQT/pdaxqtrom/pdaxqtrom.html)
For those who only want English create a file called monolingual under /etc/X11 so it will load faster
-
It's ready for testing. I uploaded the cramfs version first this time. The squashfs version will be available shortly once it has finished uploading...
http://www.thegrinder.ws/Meanies_XQT/pdaxq.../pdaxqtrom.html (http://www.thegrinder.ws/Meanies_XQT/pdaxqtrom/pdaxqtrom.html)
For those who only want English create a file called monolingual under /etc/X11 so it will load faster
[div align=\"right\"][a href=\"index.php?act=findpost&pid=126997\"][{POST_SNAPBACK}][/a][/div]
You are amazing meanie. I'm curious, what is the difference between squashfs of cramfs? Is one smaller and slower than the other?
-
It's ready for testing. I uploaded the cramfs version first this time. The squashfs version will be available shortly once it has finished uploading...
http://www.thegrinder.ws/Meanies_XQT/pdaxq.../pdaxqtrom.html (http://www.thegrinder.ws/Meanies_XQT/pdaxqtrom/pdaxqtrom.html)
For those who only want English create a file called monolingual under /etc/X11 so it will load faster
[div align=\"right\"][{POST_SNAPBACK}][/a][/div] (http://index.php?act=findpost&pid=126997\")
You are amazing meanie. I'm curious, what is the difference between squashfs of cramfs? Is one smaller and slower than the other?
[div align=\"right\"][a href=\"index.php?act=findpost&pid=127008\"][{POST_SNAPBACK}][/a][/div]
Hello xamindar
here is the answer to you question
[a href=\"https://www.oesf.org/forums/index.php?showtopic=19084&view=findpost&p=125662]https://www.oesf.org/forums/index.php?showt...ndpost&p=125662[/url]
cheers
freebird
-
Hello xamindar
here is the answer to you question
https://www.oesf.org/forums/index.php?showt...ndpost&p=125662 (https://www.oesf.org/forums/index.php?showtopic=19084&view=findpost&p=125662)
cheers
freebird
[div align=\"right\"][a href=\"index.php?act=findpost&pid=127014\"][{POST_SNAPBACK}][/a][/div]
Thanks freebird, I guess I should have searched before posting.
-
I get an error when I try to run gaim. I haven't tried any other apps yet, I'll edit this post if the other apps have the same problem. Error is as follows:
bash-3.00$ gaim
Gaim has segfaulted and attempted to dump a core file.
This is a bug in the software and has happened through
no fault of your own.
It is possible that this bug is already fixed in CVS.
If you can reproduce the crash, please notify the gaim
maintainers by reporting a bug at
http://gaim.sourceforge.net/bug.php
Please make sure to specify what you were doing at the time,
and post the backtrace from the core file. If you do not know
how to get the backtrace, please get instructions at
http://gaim.sourceforge.net/gdb.php. If you need further
assistance, please IM either SeanEgn or LSchiere and
they can help you.
Aborted
bash-3.00$
Also, I get two messages when I open up a normal terminal:
sourcing compiler environment at /mnt/zgcc
sourcing compiler environment at /mnt/zgcc
Shouldn't there only be one? What do I edit to fix that?
EDIT: ok, so far other programs are working just fine. I didn't find a core dump anywhere. If there is anything else I can provide please let me know.
-
It's ready for testing. I uploaded the cramfs version first this time. The squashfs version will be available shortly once it has finished uploading...
http://www.thegrinder.ws/Meanies_XQT/pdaxq.../pdaxqtrom.html (http://www.thegrinder.ws/Meanies_XQT/pdaxqtrom/pdaxqtrom.html)
For those who only want English create a file called monolingual under /etc/X11 so it will load faster
[div align=\"right\"][a href=\"index.php?act=findpost&pid=126997\"][{POST_SNAPBACK}][/a][/div]
Hello Meanie
Well have tested the new cramfs release
after installing the following apps was not working gimp,gnumeric,sctie,abiword,xarchiver...
but all had the same warning something like error while loading shared libraries /opt/QtPalmtop/lib/gtk-2.0/2.4.0
so i have typed the following, to see what will happen
su
ln -sf /opt/QtPalmtop/lib/gtk-2.0 /usr/lib/gtk-2.0
gdk-pixbuf-query-loaders > /etc/gtk-2.0/gdk-pixbuf.loaderswith the second command line i had some warning but do not remember what it was
anyway after that have launched those applications all are working now
but things go slow even after creating monolingual file
btw: what do you mean by swap file of 64M minimum is required, as i am runing pdaxtrom (uncompressed) from 1g cf ext2 formatted ?
-
is there an automounter update? so far, automounter-c3000_0.4.7_arm.zip
-
man this is so sweeeeeett!!!!!!!!!!
I cannot believe the amount of programs you put into this thing. This is amazing. Now I can throw away my pc!
For newbies, you if you have problems like i did with the qt tabs icons, just startx icon and then when its fully loaded, use fn+ stylus on screen and you can highlight x applications and launch em through there. also, if you want to go full screen, hit menu on the keyboard and click on fullscreen.
meanie...I am speechless. ohh god i can't put this thing down...too cool!
-
Hey,
I did the following:
1. Installed Cacko 1.23 on a C-1000.
2. Formatted the SD card with mkfs.msdos /dev/mmcda1. Made a 128 mb swap file on the card.
3. Copied the base, apps, and install script to the SD card through a USB connection w/ the zaurus
4. Ran the said install script, they both installed to root of the SD card
5. Ran the ln fs and gdk-pixbuf command from previous reply.
6. Ran my first X program w/ "xlauncher gaim"
7. Ran other programs through the menu and through "xlauncher [prgm name]"
Things that didn't work:
GAIM (segfault error)
Things that worked super-slowly:
Gimp
Free42
FireFox
Dillo
That's all I've tested. I don't have a graphical menu for X/QT - only a menu option in the main bottom left menu. I'm going to try restarting my z and seeing what happens.
Louis
-
I get an error when I try to run gaim. I haven't tried any other apps yet, I'll edit this post if the other apps have the same problem. Error is as follows:
bash-3.00$ gaim
Gaim has segfaulted and attempted to dump a core file.
This is a bug in the software and has happened through
no fault of your own.
It is possible that this bug is already fixed in CVS.
If you can reproduce the crash, please notify the gaim
maintainers by reporting a bug at
http://gaim.sourceforge.net/bug.php
Please make sure to specify what you were doing at the time,
and post the backtrace from the core file. If you do not know
how to get the backtrace, please get instructions at
http://gaim.sourceforge.net/gdb.php. If you need further
assistance, please IM either SeanEgn or LSchiere and
they can help you.
Aborted
bash-3.00$
Also, I get two messages when I open up a normal terminal:
sourcing compiler environment at /mnt/zgcc
sourcing compiler environment at /mnt/zgcc
Shouldn't there only be one? What do I edit to fix that?
EDIT: ok, so far other programs are working just fine. I didn't find a core dump anywhere. If there is anything else I can provide please let me know.
[div align=\"right\"][a href=\"index.php?act=findpost&pid=127033\"][{POST_SNAPBACK}][/a][/div]
try in /home/zaurus/.profile
not sure how you got duplicate ones, but just remove one and you should be fine. but even then, it does not hurt since it is just setting up the environment variables twice
well, if gaim is the only problem, then that's quite positive. i was planning to compile gaim 2.0 anyway later on, so I am not going to worry about 1.5 not working but replace it with 2.0 instead.
-
I restarted my Z. Now I need to remount the cramfs images. How do I do that? I know I do it with automounter, but I'm not sure what the protocol is. Can someone give step by step instructions or link to them?
Thanks,
Louis
-
well, so far, there seems to be problems with gaim and gimp for some people while it works for others.
a swapfile is really needed for better speed. also, it seems that running off SD card is slower than running off CF/internal MicroDrive. also note that this is never going to be as fast as pdaXrom, so if you want speed, go use pdaXrom instead. this package is intended to allow you to run apps available in pdaXrom while retaining Sharp/Cacko ROM.
the very first load of X/Qt is very slow, but with a swapfile, subsequent launches are much faster.
by default, the scim subsystem is loaded when X/Qt is loaded. scim allows you to input other languages such a Chinese and Japanese. if the file monolingual exists, then scim won't be loaded and X/Qt will load faster.
also, the icons on the X/Q tab launch the apps in rootless/embedded mode by default. This feature is experimental and might not always work. but if it works, then the app is launched in a shrink down version of X/Qt on the qtopia desktop. I have limited the number of apps launched in this way to 2. to turn off this feature and make those icons behave as before and just launch the apps into the full X/Qt environment, remove the file /etc/X11/app-defaults/Xembed
the installer will not remove /home/zaurus/.fluxbox so if you had pdaXrom installed previously, the old settings will remain untouched. to get the latest menus and keymappings, remove this directory before installing pdaXqtrom, ie rm -r /home/zaurus/.fluxbox
manually mounting the cramfs files is done as follows:
su
mount /mnt/card/pdaXqtrom-base.cramfs
mount /mnt/card/pdaXqtrom-apps.cramfs
ldconfig
If you see that you may have an older automounter installed but you have 0.4.7 installed, just ignore it. seems like it says that on Cacko ROM.
with Cacko, there is a memory applet on the Qt taskbar. use it to create a swapfile and make sure to enable the swapfile when using X/Qt. For Sharp ROM users, you can install the memory applet or just do it manually from the console.
-
i get an error:
Can't find /mnt/card/pdaXqtrom-base.cramfs in /etc/fstab
Louis
-
The axyftp works but i do encounter a problem when looking through 200 folders. When I try and highlight one, it shoots/scrolls down to the bottom. Is there a work around for this? So far, i use the directorynavigation display to type in the locations on where I want to go. I can browse the directories but i can't highlight with stylus.
-
2 minutes 30 seconds to start FireFox after X/QT has loaded on a C-1000 running cramfs from SD w/ 64 mb swap. What are other peoples launch times?
~1 minute to load http://www.cnn.com/ (http://www.cnn.com/)
1 minute 20 seconds to load X/QT from hitting the StartX button.
Is there a QT version of Links or can the X version be included in this package?
I am happy to report that the C-3000 automounter is working beautifully on my C-1000. After install I just had to eject/re-insert the SD card. After rebooting it did the mounting that I could not do manually. Yay!
Slowness aside, this is really really cool. Thanks Meanie!! It has been relatively painless in comparison to other Zaurus things...
Louis
-
well, so far, there seems to be problems with gaim and gimp for some people while it works for others.
While gaim doesn't work for me the gimp will spit out all kinds of errors in the console but it will still load.
-
Gimp has a font issue. Gaim needs ssl
-
2 minutes 30 seconds to start FireFox after X/QT has loaded on a C-1000 running cramfs from SD w/ 64 mb swap. What are other peoples launch times?
~1 minute to load http://www.cnn.com/ (http://www.cnn.com/)
1 minute 20 seconds to load X/QT from hitting the StartX button.
First impression is this is magnificent. Slowness is the main issue for me.
Running from mounted cramfs on a CF card with 64mb swap and monolingual set, Firefox started to a blank screen in a minute and 30 seconds. X/Qt ranged from 45 seconds to one and a half minutes. On the other hand, dillo launched in 30 seconds. My CNN.com results with Firefox were similar, but dillo could load Slashdot and LWN in a few seconds. So who needs CNN anyway?
I can adjust to long startups, but Firefox was fairly sluggish even after it was loaded. Most other apps seemed okay once they were loaded. If the apps are stable through multiple suspensions, the load time won't matter that much. After giving this a little time to get solid, I am hoping that expanding it and running uncompressed will give a reasonable speed boost.
-
Hello Meanie
a swapfile is really needed for better speed. also, it seems that running off SD card is slower than running off CF/internal MicroDrive. also note that this is never going to be as fast as pdaXrom, so if you want speed, go use pdaXrom instead.
while waiting this new release of pdaXqtrom, i flashed my zaurus with pdaxrom,
to test your gtk2 hacked file it seems it is a corrupted file cause i get crc error
with Cacko, there is a memory applet on the Qt taskbar. use it to create a swapfile and make sure to enable the swapfile when using X/Qt. For Sharp ROM users, you can install the memory applet or just do it manually from the console.
But how to enable swapfile when using X/Qt ??
EDIT: ok i found the following in your website
enabling Swap
The following demonstrates how to configure a 128MB swap file on the C3000's harddisk. Normally a swap file is not required unless you are running many X/Qt applications and doing onboard development. Most users with X/Qt will probably only require 32MB - 64MB swapfile.
# su
# dd if=/dev/zero of=/hdd3/swapfile bs=1048576 count=128
# mkswap /hdd3/swapfile
# swapon /hdd3/swapfile
# echo "/hdd3/swapfile swap defaults 0 0" >> /etc/fstabTo enable swap:
# su
# swapon /hdd3/swapfileTo disable swap:
# su
# swapoff /hdd3/swapfile
To check swap status:
# cat /proc/swaps
As i am using c860 should i only replace /hdd3/swapfile with /home/swapfile (with /mnt/cf/swapfile for CF) ??
and to enable swapfile on xqt should i type the command line from xqt terminal ??
thanks
freebird
-
it does not matter how or where you enble swap from as long as you do it. xqt is just one huge app from the OS point of view , ie Sharp/Cacko ROM.
Firefox is the biggest and slowest app. It's slow even on pdaXrom because it loads so many little files and needs lots of memory. you can speed it up by disabling some of the features like automatically checking for updates, etc.. which it does on startup. also, specifying a location for tmp files and increasing the cache will also help. just use dillo as a lightweight and fast browser.
btw, I updated the cramfs images. it is version 0.7.8 now
fixed gimp a bit, ie no more error messages, and the installer should warn you if you have a conflicting version of freetype installed.
upgraded gaim to the latest 2.0 beta3. fixed ssl support also.
fixed link for /usr/lib/gtk-2.0 to be done automatically in the setup script
-
it does not matter how or where you enble swap from as long as you do it. xqt is just one huge app from the OS point of view , ie Sharp/Cacko ROM.
Firefox is the biggest and slowest app. It's slow even on pdaXrom because it loads so many little files and needs lots of memory. you can speed it up by disabling some of the features like automatically checking for updates, etc.. which it does on startup. also, specifying a location for tmp files and increasing the cache will also help. just use dillo as a lightweight and fast browser.
btw, I updated the cramfs images. it is version 0.7.8 now
fixed gimp a bit, ie no more error messages, and the installer should warn you if you have a conflicting version of freetype installed.
upgraded gaim to the latest 2.0 beta3. fixed ssl support also.
fixed link for /usr/lib/gtk-2.0 to be done automatically in the setup script
[div align=\"right\"][a href=\"index.php?act=findpost&pid=127196\"][{POST_SNAPBACK}][/a][/div]
Well
have downloaded qtopia-memoryapplet_1.0.3_arm.ipk
from the GUI created a .swapfile of 128M on my CF
then enabled it as follow
su
swapon /mnt/cf/.swapfileseems could be done from the GUI too
Now things are going much better
i am using in the same time rox, firefox, gimp and abiword and switching bettween them
No memory warnings now such as "system is becoming slow please close some apps"
and i think also that is is not slower than pdaxrom
as i have already tested firefox on pdaxrom
and i think that it is enought smooth for working
thanks MEANIE
btw: ROX seems having some problems with windows maximazing i will test more later
-
hmm, gaim still segfaults in the new one.
-
btw, I updated the cramfs images. it is version 0.7.8 now
fixed gimp a bit, ie no more error messages, and the installer should warn you if you have a conflicting version of freetype installed.
upgraded gaim to the latest 2.0 beta3. fixed ssl support also.
fixed link for /usr/lib/gtk-2.0 to be done automatically in the setup script
[div align=\"right\"][a href=\"index.php?act=findpost&pid=127196\"][{POST_SNAPBACK}][/a][/div]
Hi all
Have just installed the new cramfs on my CF (so pdaXqtrom-install.sh not used)
then launched abiword here are the terminal inputs and outputs #xlauncher abiword
launching abiword please wait a moment....
abiword:error while loading shared libraries: /opt/QtPalmtop/lib/gtk-2.0/2.4.0/loaders/libpixbufloader-png.so: undefined symbol: png_create_read_struct_2then#su
#ln -sf /opt/QtPalmtop/lib/gtk-2.0 /usr/lib/gtk-2.0
#gdk-pixbuf-query-loaders > /etc/gtk-2.0/gdk-pixbuf.loaders
g_module_open() failed for /opt/QtPalmtop/lib/gtk-2.0/2.4.0/loaders/libpixbufloader-png.so: /opt/QtPalmtop/lib/gtk-2.0/2.4.0/loaders/libpixbufloader-png.so: undefined symbol: png_create_read_struct_2and finaly#xlauncher abiwordand abiword works
but planner doesn't work
here are the warninigs i had#xlauncher planner
(planner:2269): Gtk-WARNING **: Error loading icon from file '/usr/share/pixmaps/gnome-planner.png':
Couldn't recognize the image file format for file '/usr/share/pixmaps/gnome-planner.png'
(planner:2269): Gtk-CRITICAL **: gtk_icon_set_new_from_pixbuf: assertion 'pixbuf !=NULL ' failed
dia works but starts totaly minimized
rox works but
1-the window doesn't keep the same size it changes in each refresh depending on the quantity of files on the directory
2-the icones such as eye and folders are not displayed but a
-
hey freebird, can you test gaim? I am trying to figure out if it is a problem with my Zaurus. I haven't flashed it in a long time and I have done a lot to it so I'm curious. Mine might be dure for a reflash.
-
btw, I updated the cramfs images. it is version 0.7.8 now
fixed gimp a bit, ie no more error messages, and the installer should warn you if you have a conflicting version of freetype installed.
upgraded gaim to the latest 2.0 beta3. fixed ssl support also.
fixed link for /usr/lib/gtk-2.0 to be done automatically in the setup script
[div align=\"right\"][a href=\"index.php?act=findpost&pid=127196\"][{POST_SNAPBACK}][/a][/div]
Hi all
Have just installed the new cramfs on my CF (so pdaXqtrom-install.sh not used)
then launched abiword here are the terminal inputs and outputs #xlauncher abiword
launching abiword please wait a moment....
abiword:error while loading shared libraries: /opt/QtPalmtop/lib/gtk-2.0/2.4.0/loaders/libpixbufloader-png.so: undefined symbol: png_create_read_struct_2then#su
#ln -sf /opt/QtPalmtop/lib/gtk-2.0 /usr/lib/gtk-2.0
#gdk-pixbuf-query-loaders > /etc/gtk-2.0/gdk-pixbuf.loaders
g_module_open() failed for /opt/QtPalmtop/lib/gtk-2.0/2.4.0/loaders/libpixbufloader-png.so: /opt/QtPalmtop/lib/gtk-2.0/2.4.0/loaders/libpixbufloader-png.so: undefined symbol: png_create_read_struct_2and finaly#xlauncher abiwordand abiword works
but planner doesn't work
here are the warninigs i had#xlauncher planner
(planner:2269): Gtk-WARNING **: Error loading icon from file '/usr/share/pixmaps/gnome-planner.png':
Couldn't recognize the image file format for file '/usr/share/pixmaps/gnome-planner.png'
(planner:2269): Gtk-CRITICAL **: gtk_icon_set_new_from_pixbuf: assertion 'pixbuf !=NULL ' failed
dia works but starts totaly minimized
rox works but
1-the window doesn't keep the same size it changes in each refresh depending on the quantity of files on the directory
2-the icones such as eye and folders are not displayed but a
[div align=\"right\"][a href=\"index.php?act=findpost&pid=127322\"][{POST_SNAPBACK}][/a][/div]
?????
why didnt you use the install/setup scripts?
all you problems is because you didnt run the setup scripts
installing to SD and CF is exactly the same (except for speed of those devices). what are you trying to accomplish?
xamindar: i could reproduce the crash with gaim 1.5, but with gaim 2.0 it works fine on my machine. does it work for other people? did you reinstall or just replace the images?
you can replace the images and not run the install script but you have to run each of the setup script from the mounted images
-
btw, I updated the cramfs images. it is version 0.7.8 now
fixed gimp a bit, ie no more error messages, and the installer should warn you if you have a conflicting version of freetype installed.
upgraded gaim to the latest 2.0 beta3. fixed ssl support also.
fixed link for /usr/lib/gtk-2.0 to be done automatically in the setup script
[div align=\"right\"][a href=\"index.php?act=findpost&pid=127196\"][{POST_SNAPBACK}][/a][/div]
Hi all
Have just installed the new cramfs on my CF (so pdaXqtrom-install.sh not used)
then launched abiword here are the terminal inputs and outputs #xlauncher abiword
launching abiword please wait a moment....
abiword:error while loading shared libraries: /opt/QtPalmtop/lib/gtk-2.0/2.4.0/loaders/libpixbufloader-png.so: undefined symbol: png_create_read_struct_2then#su
#ln -sf /opt/QtPalmtop/lib/gtk-2.0 /usr/lib/gtk-2.0
#gdk-pixbuf-query-loaders > /etc/gtk-2.0/gdk-pixbuf.loaders
g_module_open() failed for /opt/QtPalmtop/lib/gtk-2.0/2.4.0/loaders/libpixbufloader-png.so: /opt/QtPalmtop/lib/gtk-2.0/2.4.0/loaders/libpixbufloader-png.so: undefined symbol: png_create_read_struct_2and finaly#xlauncher abiwordand abiword works
but planner doesn't work
here are the warninigs i had#xlauncher planner
(planner:2269): Gtk-WARNING **: Error loading icon from file '/usr/share/pixmaps/gnome-planner.png':
Couldn't recognize the image file format for file '/usr/share/pixmaps/gnome-planner.png'
(planner:2269): Gtk-CRITICAL **: gtk_icon_set_new_from_pixbuf: assertion 'pixbuf !=NULL ' failed
dia works but starts totaly minimized
rox works but
1-the window doesn't keep the same size it changes in each refresh depending on the quantity of files on the directory
2-the icones such as eye and folders are not displayed but a
[div align=\"right\"][a href=\"index.php?act=findpost&pid=127322\"][{POST_SNAPBACK}][/a][/div]
?????
why didnt you use the install/setup scripts?
all you problems is because you didnt run the setup scripts
installing to SD and CF is exactly the same (except for speed of those devices). what are you trying to accomplish?
xamindar: i could reproduce the crash with gaim 1.5, but with gaim 2.0 it works fine on my machine. does it work for other people? did you reinstall or just replace the images?
you can replace the images and not run the install script but you have to run each of the setup script from the mounted images
[div align=\"right\"][a href=\"index.php?act=findpost&pid=127341\"][{POST_SNAPBACK}][/a][/div]
Meanie
have not run pdaxqtrom-install.sh but have run the two scripts from the mounted images pdaXqtrom-base.sh and pdaXqtApps.sh
mean i proceed as follow
#mkdir /mnt/cf/pdaXqtrom-base
#mount -o loop pdaXqtrom-base.cramfs /mnt
#cp -R /mnt/* /usr/mnt.rom/cf/pdaXqtrom-base
#umount /mnt
# cd /mnt/cf/pdaXqtrom-base
#./pdaXqtrom-base-setupi do same for the pdaXqtrom-apps
Xamindar
i will test and let you knew
cheers
freebird
-
if you do that then the CF card has to be ext2 or ext3 and you need to use cp -a, not cp -R
-
xamindar: i could reproduce the crash with gaim 1.5, but with gaim 2.0 it works fine on my machine. does it work for other people? did you reinstall or just replace the images?
you can replace the images and not run the install script but you have to run each of the setup script from the mounted images
[div align=\"right\"][a href=\"index.php?act=findpost&pid=127341\"][{POST_SNAPBACK}][/a][/div]
I removed the old ones from the package manager and then edited fstab and removed the entries in there. Then rebooted. Then I installed the new ones with the install script and rebooted.
hmm, I'll fiddle around with it a little more. Figures the only app I want doesn't work. I have tested gimp, dillo, firefox and they all work great!
-
if you do that then the CF card has to be ext2 or ext3 and you need to use cp -a, not cp -R
[div align=\"right\"][a href=\"index.php?act=findpost&pid=127393\"][{POST_SNAPBACK}][/a][/div]
Yes
my CF is ext2, but have always used cp -R should i reinstall with cp -a
have also created a swapfile of 128M on my cf
and finaly have installed openoffice cramfs from xqtcramfs and it works great with pdaXqtrom
but noticed that openoffice displays text documents faster than abiword specially when scrolling !!!
-
abiword gives me
abiword
(abiword:4673): GdkPixbuf-WARNING **: Error loading XPM image loader: Image type 'xpm' is not supported
(abiword:4673): Gtk-CRITICAL **: gtk_icon_set_new_from_pixbuf: assertion `pixbuf != NULL' failed
(abiword:4673): Gtk-CRITICAL **: gtk_icon_factory_add: assertion `icon_set != NULL' failed
(abiword:4673): Gtk-CRITICAL **: gtk_icon_set_unref: assertion `icon_set != NULL' failed
Aborted
bash-3.00#
-
abiword gives me
abiword
(abiword:4673): GdkPixbuf-WARNING **: Error loading XPM image loader: Image type 'xpm' is not supported
(abiword:4673): Gtk-CRITICAL **: gtk_icon_set_new_from_pixbuf: assertion `pixbuf != NULL' failed
(abiword:4673): Gtk-CRITICAL **: gtk_icon_factory_add: assertion `icon_set != NULL' failed
(abiword:4673): Gtk-CRITICAL **: gtk_icon_set_unref: assertion `icon_set != NULL' failed
Aborted
bash-3.00#[div align=\"right\"][a href=\"index.php?act=findpost&pid=127426\"][{POST_SNAPBACK}][/a][/div]
Xaminder try typing this on the console
#su
#ln -sf /opt/QtPalmtop/lib/gtk-2.0 /usr/lib/gtk-2.0
#gdk-pixbuf-query-loaders > /etc/gtk-2.0/gdk-pixbuf.loadersfreebird
-
?????
why didnt you use the install/setup scripts?
all you problems is because you didnt run the setup scripts
installing to SD and CF is exactly the same (except for speed of those devices). what are you trying to accomplish?
xamindar: i could reproduce the crash with gaim 1.5, but with gaim 2.0 it works fine on my machine. does it work for other people? did you reinstall or just replace the images?
you can replace the images and not run the install script but you have to run each of the setup script from the mounted images
[div align=\"right\"][a href=\"index.php?act=findpost&pid=127341\"][{POST_SNAPBACK}][/a][/div]
Ok Meanie
have removed my ext2 CF
flashed my Z with cakco1.23 light
formatted the user partition
installed visudo
copied pdaXqtrom-install.sh, pdaXqtrom-apps.cramfs pdaXqtrom-base.cramfs to my fat16 sd card
typed
./pdaXqtrom-install.shstarted testing the mounted cramfs
i had the same warnings as when installed on the ext2 CF abiword, gnumeric.. not working
typed
#su
#ln -sf /opt/QtPalmtop/lib/gtk-2.0 /usr/lib/gtk-2.0
#gdk-pixbuf-query-loaders > /etc/gtk-2.0/gdk-pixbuf.loadersthen abiword, gnumeric works
but stardict and planner still not working
and i have the same warning too
for planner:#xlauncher planner
launching planner - please wait a moment....
(planner:2269): Gtk-WARNING **: Error loading icon from file '/usr/share/pixmaps/gnome-planner.png':
Couldn't recognize the image file format for file '/usr/share/pixmaps/gnome-planner.png'
(planner:2269): Gtk-CRITICAL **: gtk_icon_set_new_from_pixbuf: assertion 'pixbuf !=NULL ' failedfor stardict:
i had a a blank square in the middle of the screen and these warning on the terminal
#xlauncher stardict
launching startdict - please wait a momoent....
(startdict:2717): Gdk-pixbuf-CRITICAL **: gdk_pixbuf_get_width: assertion 'pixbuf !=NULL' failed
(startdict:2717): Gdk-pixbuf-CRITICAL **: gdk_pixbuf_get_height: assertion 'pixbuf !=NULL' failed
(startdict:2717): Gdk-pixbuf-CRITICAL **: gdk_draw_pixbuf: assertion 'GDK_IS_PIXBUF (pixbuf)' failedand finally
for gaim:
i had same segfault warnings as Xamindar
cheers
freebird
-
?????
why didnt you use the install/setup scripts?
all you problems is because you didnt run the setup scripts
installing to SD and CF is exactly the same (except for speed of those devices). what are you trying to accomplish?
xamindar: i could reproduce the crash with gaim 1.5, but with gaim 2.0 it works fine on my machine. does it work for other people? did you reinstall or just replace the images?
you can replace the images and not run the install script but you have to run each of the setup script from the mounted images
[div align=\"right\"][a href=\"index.php?act=findpost&pid=127341\"][{POST_SNAPBACK}][/a][/div]
Ok Meanie
have removed my ext2 CF
flashed my Z with cakco1.23 light
formatted the user partition
installed visudo
copied pdaXqtrom-install.sh, pdaXqtrom-apps.cramfs pdaXqtrom-base.cramfs to my fat16 sd card
typed
./pdaXqtrom-install.shstarted testing the mounted cramfs
i had the same warnings as when installed on the ext2 CF abiword, gnumeric.. not working
typed
#su
#ln -sf /opt/QtPalmtop/lib/gtk-2.0 /usr/lib/gtk-2.0
#gdk-pixbuf-query-loaders > /etc/gtk-2.0/gdk-pixbuf.loadersthen abiword, gnumeric works
but stardict and planner still not working
and i have the same warning too
for planner:#xlauncher planner
launching planner - please wait a moment....
(planner:2269): Gtk-WARNING **: Error loading icon from file '/usr/share/pixmaps/gnome-planner.png':
Couldn't recognize the image file format for file '/usr/share/pixmaps/gnome-planner.png'
(planner:2269): Gtk-CRITICAL **: gtk_icon_set_new_from_pixbuf: assertion 'pixbuf !=NULL ' failedfor stardict:
i had a a blank square in the middle of the screen and these warning on the terminal
#xlauncher stardict
launching startdict - please wait a momoent....
(startdict:2717): Gdk-pixbuf-CRITICAL **: gdk_pixbuf_get_width: assertion 'pixbuf !=NULL' failed
(startdict:2717): Gdk-pixbuf-CRITICAL **: gdk_pixbuf_get_height: assertion 'pixbuf !=NULL' failed
(startdict:2717): Gdk-pixbuf-CRITICAL **: gdk_draw_pixbuf: assertion 'GDK_IS_PIXBUF (pixbuf)' failedand finally
for gaim:
i had same segfault warnings as Xamindar
cheers
freebird
[div align=\"right\"][a href=\"index.php?act=findpost&pid=127489\"][{POST_SNAPBACK}][/a][/div]
what does
ls -la /opt/QtPalmtop/lib/libpng*show?
also. what is inside /etc/gtk-2.0/gdk-pixbuf.loaders ?
running gdk-pixbuf-query-loaders should not give you any errors unless you are missing some libraries.
what does
gaim --versionsay?
can you run gaim with debug enabled, ie
gaim --debug
-
Xaminder try typing this on the console
plugins: probing /home/system/var/mnt/pdaXqtrom-apps/usr/lib/gaim/autorecon.so
plugins: /home/system/var/mnt/pdaXqtrom-apps/usr/lib/gaim/autorecon.so is unloadable: undefined symbol: serv_set_away
plugins: /home/system/var/mnt/pdaXqtrom-apps/usr/lib/gaim/autorecon.so is unloadable: ABI version mismatch 1.5.x (need 2.0.x)
plugins: probing /home/system/var/mnt/pdaXqtrom-apps/usr/lib/gaim/docklet.so
plugins: probing /home/system/var/mnt/pdaXqtrom-apps/usr/lib/gaim/extplacement.so
plugins: probing /home/system/var/mnt/pdaXqtrom-apps/usr/lib/gaim/gaim-remote.so
plugins: /home/system/var/mnt/pdaXqtrom-apps/usr/lib/gaim/gaim-remote.so is unloadable: undefined symbol: away_messages
plugins: probing /home/system/var/mnt/pdaXqtrom-apps/usr/lib/gaim/gaimrc.so
plugins: probing /home/system/var/mnt/pdaXqtrom-apps/usr/lib/gaim/gestures.so
plugins: probing /home/system/var/mnt/pdaXqtrom-apps/usr/lib/gaim/history.so
plugins: probing /home/system/var/mnt/pdaXqtrom-apps/usr/lib/gaim/iconaway.so
plugins: probing /home/system/var/mnt/pdaXqtrom-apps/usr/lib/gaim/idle.so
plugins: probing /home/system/var/mnt/pdaXqtrom-apps/usr/lib/gaim/libgg.so
plugins: /home/system/var/mnt/pdaXqtrom-apps/usr/lib/gaim/libgg.so is unloadable: undefined symbol: gaim_escape_html
plugins: /home/system/var/mnt/pdaXqtrom-apps/usr/lib/gaim/libgg.so is unloadable: ABI version mismatch 1.5.x (need 2.0.x)
plugins: probing /home/system/var/mnt/pdaXqtrom-apps/usr/lib/gaim/libirc.so
plugins: probing /home/system/var/mnt/pdaXqtrom-apps/usr/lib/gaim/libjabber.so
plugins: probing /home/system/var/mnt/pdaXqtrom-apps/usr/lib/gaim/libmsn.so
plugins: probing /home/system/var/mnt/pdaXqtrom-apps/usr/lib/gaim/libnapster.so
plugins: /home/system/var/mnt/pdaXqtrom-apps/usr/lib/gaim/libnapster.so is unloadable: undefined symbol: gaim_escape_html
plugins: /home/system/var/mnt/pdaXqtrom-apps/usr/lib/gaim/libnapster.so is unloadable: ABI version mismatch 1.5.x (need 2.0.x)
plugins: probing /home/system/var/mnt/pdaXqtrom-apps/usr/lib/gaim/libnovell.so
plugins: probing /home/system/var/mnt/pdaXqtrom-apps/usr/lib/gaim/liboscar.so
plugins: probing /home/system/var/mnt/pdaXqtrom-apps/usr/lib/gaim/libsimple.so
plugins: probing /home/system/var/mnt/pdaXqtrom-apps/usr/lib/gaim/libyahoo.so
plugins: probing /home/system/var/mnt/pdaXqtrom-apps/usr/lib/gaim/libzephyr.so
plugins: probing /home/system/var/mnt/pdaXqtrom-apps/usr/lib/gaim/notify.so
plugins: probing /home/system/var/mnt/pdaXqtrom-apps/usr/lib/gaim/psychic.so
plugins: probing /home/system/var/mnt/pdaXqtrom-apps/usr/lib/gaim/relnot.so
plugins: probing /home/system/var/mnt/pdaXqtrom-apps/usr/lib/gaim/spellchk.so
plugins: probing /home/system/var/mnt/pdaXqtrom-apps/usr/lib/gaim/ssl-gnutls.so
plugins: probing /home/system/var/mnt/pdaXqtrom-apps/usr/lib/gaim/ssl-nss.so
plugins: probing /home/system/var/mnt/pdaXqtrom-apps/usr/lib/gaim/ssl.so
plugins: probing /home/system/var/mnt/pdaXqtrom-apps/usr/lib/gaim/statenotify.so
plugins: probing /home/system/var/mnt/pdaXqtrom-apps/usr/lib/gaim/ticker.so
plugins: probing /home/system/var/mnt/pdaXqtrom-apps/usr/lib/gaim/timestamp.so
plugins: probing /home/system/var/mnt/pdaXqtrom-apps/usr/lib/gaim/timestamp_format.so
util: Reading file accounts.xml from directory /home/zaurus/.gaim
util: Reading file status.xml from directory /home/zaurus/.gaim
stun: using server
stun: using server
sound: Initializing sound output drivers.
util: Reading file blist.xml from directory /home/zaurus/.gaim
util: File /home/zaurus/.gaim/blist.xml does not exist (this is not necessarily an error)
prefs: Reading /home/zaurus/.gaim/prefs.xml
prefs: Finished reading /home/zaurus/.gaim/prefs.xml
prefs: removing pref /plugins/core/autorecon/hide_connected_error
prefs: removing pref /plugins/core/autorecon/hide_connecting_error
prefs: removing pref /plugins/core/autorecon/restore_state
prefs: removing pref /plugins/core/autorecon
pounce: Error reading pounces: Failed to open file '/home/zaurus/.gaim/pounces.xml': No such file or directory
Session Management: No SESSION_MANAGER found, aborting.
Gaim has segfaulted and attempted to dump a core file.
This is a bug in the software and has happened through
no fault of your own.
If you can reproduce the crash, please notify the gaim
developers by reporting a bug at
http://gaim.sourceforge.net/bug.php
Please make sure to specify what you were doing at the time
and post the backtrace from the core file. If you do not know
how to get the backtrace, please read the instructions at
http://gaim.sourceforge.net/gdb.php
If you need further assistance, please IM either SeanEgn or
LSchiere (via AIM). Contact information for Sean and Luke
on other protocols is at
http://gaim.sourceforge.net/contactinfo.php
Also, if I try to run gaim as root I get the following and it doesn't even load:
gaim: error while loading shared libraries: libgtk-x11-2.0.so.0: cannot load shared object file: No such file or directory
I hope this stuff helps in any way.
-
what does
ls -la /opt/QtPalmtop/lib/libpng*show?
also. what is inside /etc/gtk-2.0/gdk-pixbuf.loaders ?
running gdk-pixbuf-query-loaders should not give you any errors unless you are missing some libraries.
what does
gaim --versionsay?
can you run gaim with debug enabled, ie
gaim --debug[div align=\"right\"][a href=\"index.php?act=findpost&pid=127514\"][{POST_SNAPBACK}][/a][/div]
here you are
ls -la /opt/QtPalmtop/lib/libpng* output:
lrwxrwxrwx 1 root root 47 May 17 17:55 /opt/QtPalmtop/lib/libpng.so -> /mnt/pdaXqtrom-base/opt/QtPalmtop/lib/libpng.so
lrwxrwxrwx 1 root qpe 15 May 17 17:21 /opt/QtPalmtop/lib/libpng.so.2 -> libqte.so.2.3.2
lrwxrwxrwx 1 root qpe 15 May 17 17:21 /opt/QtPalmtop/lib/libpng.so.2.1.0.9 -> libqte.so.2.3.2
lrwxrwxrwx 1 root root 49 May 17 17:55 /opt/QtPalmtop/lib/libpng.so.3 -> /mnt/pdaXqtrom-base/opt/QtPalmtop/lib/libpng.so.3
lrwxrwxrwx 1 root root 55 May 17 17:55 /opt/QtPalmtop/lib/libpng.so.3.1.2.7 -> /mnt/pdaXqtrom-base/opt/QtPalmtop/lib/libpng.so.3.1.2.7
lrwxrwxrwx 1 root qpe 15 May 17 17:21 /opt/QtPalmtop/lib/libpng12.so -> libqte.so.2.3.2
lrwxrwxrwx 1 root qpe 15 May 17 17:21 /opt/QtPalmtop/lib/libpng12.so.0 -> libqte.so.2.3.2
lrwxrwxrwx 1 root qpe 15 May 17 17:21 /opt/QtPalmtop/lib/libpng12.so.0.1.2.5 -> libqte.so.2.3.2
lrwxrwxrwx 1 root root 57 May 17 17:55 /opt/QtPalmtop/lib/libpng12.so.0.1.2.7 -> /mnt/pdaXqtrom-base/opt/QtPalmtop/lib/libpng12.so.0.1.2.7
what is inside /etc/gtk-2.0/gdk-pixbuf.loaders:
# GdkPixbuf Image Loader Modules file
# Automatically generated file, do not edit
# Created by gdk-pixbuf-query-loaders from gtk+-2.6.2
#
# LoaderDir = /opt/QtPalmtop/lib/gtk-2.0/2.4.0/loaders
#
"/opt/QtPalmtop/lib/gtk-2.0/2.4.0/loaders/libpixbufloader-ani.so"
"ani" 4 "gtk20" "The ANI image format"
"application/x-navi-animation" ""
"ani" ""
"RIFF ACON" " xxxx " 100
"/opt/QtPalmtop/lib/gtk-2.0/2.4.0/loaders/libpixbufloader-bmp.so"
"bmp" 4 "gtk20" "The BMP image format"
"image/bmp" "image/x-bmp" "image/x-MS-bmp" ""
"bmp" ""
"BM" "" 100
"/opt/QtPalmtop/lib/gtk-2.0/2.4.0/loaders/libpixbufloader-gif.so"
"gif" 4 "gtk20" "The GIF image format"
"image/gif" ""
"gif" ""
"GIF8" "" 100
"/opt/QtPalmtop/lib/gtk-2.0/2.4.0/loaders/libpixbufloader-ico.so"
"ico" 5 "gtk20" "The ICO image format"
"image/x-icon" ""
"ico" "cur" ""
" \001 " "zz znz" 100
" \002 " "zz znz" 100
"/opt/QtPalmtop/lib/gtk-2.0/2.4.0/loaders/libpixbufloader-jpeg.so"
"jpeg" 5 "gtk20" "The JPEG image format"
"image/jpeg" ""
"jpeg" "jpe" "jpg" ""
"\377\330" "" 100
"/opt/QtPalmtop/lib/gtk-2.0/2.4.0/loaders/libpixbufloader-pcx.so"
"pcx" 4 "gtk20" "The PCX image format"
"image/x-pcx" ""
"pcx" ""
"\n \001" "" 100
"\n\002\001" "" 100
"\n\003\001" "" 100
"\n\004\001" "" 100
"\n\005\001" "" 100
"/opt/QtPalmtop/lib/gtk-2.0/2.4.0/loaders/libpixbufloader-pnm.so"
"pnm" 4 "gtk20" "The PNM/PBM/PGM/PPM image format family"
"image/x-portable-anymap" "image/x-portable-bitmap" "image/x-portable-graymap" "image/x-portable-pixmap" ""
"pnm" "pbm" "pgm" "ppm" ""
"P1" "" 100
"P2" "" 100
"P3" "" 100
"P4" "" 100
"P5" "" 100
"P6" "" 100
"/opt/QtPalmtop/lib/gtk-2.0/2.4.0/loaders/libpixbufloader-ras.so"
"ras" 4 "gtk20" "The Sun raster image format"
"image/x-cmu-raster" "image/x-sun-raster" ""
"ras" ""
"Y\246j\225" "" 100
"/opt/QtPalmtop/lib/gtk-2.0/2.4.0/loaders/libpixbufloader-tga.so"
"tga" 4 "gtk20" "The Targa image format"
"image/x-tga" ""
"tga" "targa" ""
" \001\001" "x " 100
" \001\t" "x " 100
" \002" "xz " 99
" \003" "xz " 100
" \n" "xz " 100
" \013" "xz " 100
"/opt/QtPalmtop/lib/gtk-2.0/2.4.0/loaders/libpixbufloader-wbmp.so"
"wbmp" 4 "gtk20" "The WBMP image format"
"image/vnd.wap.wbmp" ""
"wbmp" ""
" " "z" 1
"/opt/QtPalmtop/lib/gtk-2.0/2.4.0/loaders/libpixbufloader-xbm.so"
"xbm" 4 "gtk20" "The XBM image format"
"image/x-xbitmap" ""
"xbm" ""
"#define " "" 100
"/*" "" 50
"/opt/QtPalmtop/lib/gtk-2.0/2.4.0/loaders/libpixbufloader-xpm.so"
"xpm" 4 "gtk20" "The XPM image format"
"image/x-xpixmap" ""
"xpm" ""
"/* XPM */" "" 100the gaim version is: Gaim 2.0.0beta3
gaim --debug output is:plugins: probing /home/system/var/mnt/pdaXqtrom-apps/usr/lib/gaim/autorecon.so
plugins: /home/system/var/mnt/pdaXqtrom-apps/usr/lib/gaim/autorecon.so is unloadable: undefined symbol: serv_set_away
plugins: /home/system/var/mnt/pdaXqtrom-apps/usr/lib/gaim/autorecon.so is unloadable: ABI version mismatch 1.5.x (need 2.0.x)
plugins: probing /home/system/var/mnt/pdaXqtrom-apps/usr/lib/gaim/docklet.so
plugins: probing /home/system/var/mnt/pdaXqtrom-apps/usr/lib/gaim/extplacement.so
plugins: probing /home/system/var/mnt/pdaXqtrom-apps/usr/lib/gaim/gaim-remote.so
plugins: /home/system/var/mnt/pdaXqtrom-apps/usr/lib/gaim/gaim-remote.so is unloadable: undefined symbol: away_messages
plugins: probing /home/system/var/mnt/pdaXqtrom-apps/usr/lib/gaim/gaimrc.so
plugins: probing /home/system/var/mnt/pdaXqtrom-apps/usr/lib/gaim/gestures.so
plugins: probing /home/system/var/mnt/pdaXqtrom-apps/usr/lib/gaim/history.so
plugins: probing /home/system/var/mnt/pdaXqtrom-apps/usr/lib/gaim/iconaway.so
plugins: probing /home/system/var/mnt/pdaXqtrom-apps/usr/lib/gaim/idle.so
plugins: probing /home/system/var/mnt/pdaXqtrom-apps/usr/lib/gaim/libgg.so
plugins: /home/system/var/mnt/pdaXqtrom-apps/usr/lib/gaim/libgg.so is unloadable: undefined symbol: gaim_escape_html
plugins: /home/system/var/mnt/pdaXqtrom-apps/usr/lib/gaim/libgg.so is unloadable: ABI version mismatch 1.5.x (need 2.0.x)
plugins: probing /home/system/var/mnt/pdaXqtrom-apps/usr/lib/gaim/libirc.so
plugins: probing /home/system/var/mnt/pdaXqtrom-apps/usr/lib/gaim/libjabber.so
plugins: probing /home/system/var/mnt/pdaXqtrom-apps/usr/lib/gaim/libmsn.so
plugins: probing /home/system/var/mnt/pdaXqtrom-apps/usr/lib/gaim/libnapster.so
plugins: /home/system/var/mnt/pdaXqtrom-apps/usr/lib/gaim/libnapster.so is unloadable: undefined symbol: gaim_escape_html
plugins: /home/system/var/mnt/pdaXqtrom-apps/usr/lib/gaim/libnapster.so is unloadable: ABI version mismatch 1.5.x (need 2.0.x)
plugins: probing /home/system/var/mnt/pdaXqtrom-apps/usr/lib/gaim/libnovell.so
plugins: probing /home/system/var/mnt/pdaXqtrom-apps/usr/lib/gaim/liboscar.so
plugins: probing /home/system/var/mnt/pdaXqtrom-apps/usr/lib/gaim/libsimple.so
plugins: probing /home/system/var/mnt/pdaXqtrom-apps/usr/lib/gaim/libyahoo.so
plugins: probing /home/system/var/mnt/pdaXqtrom-apps/usr/lib/gaim/libzephyr.so
plugins: probing /home/system/var/mnt/pdaXqtrom-apps/usr/lib/gaim/notify.so
plugins: probing /home/system/var/mnt/pdaXqtrom-apps/usr/lib/gaim/psychic.so
plugins: probing /home/system/var/mnt/pdaXqtrom-apps/usr/lib/gaim/relnot.so
plugins: probing /home/system/var/mnt/pdaXqtrom-apps/usr/lib/gaim/spellchk.so
plugins: probing /home/system/var/mnt/pdaXqtrom-apps/usr/lib/gaim/ssl-gnutls.so
plugins: probing /home/system/var/mnt/pdaXqtrom-apps/usr/lib/gaim/ssl-nss.so
plugins: probing /home/system/var/mnt/pdaXqtrom-apps/usr/lib/gaim/ssl.so
plugins: probing /home/system/var/mnt/pdaXqtrom-apps/usr/lib/gaim/statenotify.so
plugins: probing /home/system/var/mnt/pdaXqtrom-apps/usr/lib/gaim/ticker.so
plugins: probing /home/system/var/mnt/pdaXqtrom-apps/usr/lib/gaim/timestamp.so
plugins: probing /home/system/var/mnt/pdaXqtrom-apps/usr/lib/gaim/timestamp_format.so
util: Reading file accounts.xml from directory /home/zaurus/.gaim
util: File /home/zaurus/.gaim/accounts.xml does not exist (this is not necessarily an error)
util: Reading file status.xml from directory /home/zaurus/.gaim
util: File /home/zaurus/.gaim/status.xml does not exist (this is not necessarily an error)
stun: using server
stun: using server
sound: Initializing sound output drivers.
Gtk: gtk_icon_set_new_from_pixbuf: assertion `pixbuf != NULL' failed
Also here is screenshot of ROX with icons displaying problem
-
ok, that explains it.
for some reason your libpng is linked to libqte? how did that happen?
and because of that anything that needs to read png files will fail.
just remove them all and rerun the setup script, ie
rm /opt/QtPalmtop/libpng*
rm /etc/gtk-2.0/gdk-pixbuf.loaders
-
ok, that explains it.
for some reason your libpng is linked to libqte? how did that happen?
and because of that anything that needs to read png files will fail.
just remove them all and rerun the setup script, ie
rm /opt/QtPalmtop/lib/libpng*
rm /etc/gtk-2.0/gdk-pixbuf.loaders[div align=\"right\"][a href=\"index.php?act=findpost&pid=127589\"][{POST_SNAPBACK}][/a][/div]
AND BINGO !
All problems have gone
tested planner, gaim, and Rox
every thing is OK now
Thanks Meanie
-
Dang, I tried that and gaim still segfaults when I try to add an account.
Can I provide anything that may help?
-
i get a freetype error. older version and needs a newer version. This happens when launching game.
-
i get a freetype error. older version and needs a newer version. This happens when launching game.
[div align=\"right\"][a href=\"index.php?act=findpost&pid=127640\"][{POST_SNAPBACK}][/a][/div]
uninstall your old version of freetype
-
Hi Meanie
In addition to my questions on the other topic, I just wanted to talk about the speed:
it take me 20 seconde to launch firefox, but its version 0.9 btw...
still have problem to launch Firefox 1.5... I'm rebooting my Z to see if it do change anything
-
realy tired lol
-
Did we give up on gaim?
-
Just a little followup. I have reflashed my Zaurus back to the japanese rom. Gaim still crashes for me when I try to add an account. However, I copied my .gaim folder from my linux machine over to the zaurus and bypassed the account add screen. So now it works (as long as I don't have to add an account).
-
Just a little followup. I have reflashed my Zaurus back to the japanese rom. Gaim still crashes for me when I try to add an account. However, I copied my .gaim folder from my linux machine over to the zaurus and bypassed the account add screen. So now it works (as long as I don't have to add an account).
[div align=\"right\"][a href=\"index.php?act=findpost&pid=129544\"][{POST_SNAPBACK}][/a][/div]
well, that's good then maybe this problem will be fixed in the next gaim beta but at least we have something useable till then