OESF Portables Forum

Everything Else => General Support and Discussion => Zaurus General Forums => Archived Forums => Security and Networking => Topic started by: YourEconProf on February 10, 2004, 04:51:33 pm

Title: Linksys 802.11 CF card and SD both /mnt/card
Post by: YourEconProf on February 10, 2004, 04:51:33 pm

I\'m sure that this has been asked before, but I can\'t find any references. I have an SL-5500 using Sharp 3.10. I have a Linksys WCF12 CF 802.11b card that works great, as well as a SanDisk 16MB SD memory card. The problem is that I can\'t use them simultaneously. Both are mounted as /mnt/card.

I edited /etc/fstab and /etc/sdcontrol to mount the SD card as /mnt/sd, which it does, but now its not visible to HancomWord or Excel open/save dialogs.

Surely there must be some way to simultaneously use a CF network card and an SD card?

TIA,
matt.

Title: Linksys 802.11 CF card and SD both /mnt/card
Post by: dawest on February 10, 2004, 11:13:04 pm

Wow that is kind of not what I see... my CF card and other devices that plug into that slot are mounted as /mnt/cf and the SD slot is /mnt/card I am not sure how that would get changed... you could umount the cf card and use the mount command to #mount /dev/cf /mnt/cf or something like that to change the CF slot back to the default so you can have the storage on the sd and your network at the same time

Be Well
DW

Title: Linksys 802.11 CF card and SD both /mnt/card
Post by: jchung on February 18, 2004, 02:41:34 pm

can you print the contents of your fstab file

Title: Linksys 802.11 CF card and SD both /mnt/card
Post by: superbondbond on February 18, 2004, 03:39:16 pm

I\'m very confused by your problem as the WCF12 is a network device and thus would have no filesystem to mount.  What is getting mounted when your network card is inserted? My guess is nothing....

insert both cards and then post the output of mount