OESF Portables Forum

Everything Else => Zaurus Distro Support and Discussion => Distros, Development, and Model Specific Forums => Archived Forums => Angstrom & OpenZaurus => Topic started by: sconfrms on April 04, 2006, 06:24:16 pm

Title: Libsdl Applications Not Working With Oz 3.5.4
Post by: sconfrms on April 04, 2006, 06:24:16 pm

Both e-uae and Frodo (4.2-r1) do not work straight from package installation from the 3.5.4 feed.  I believe that it is a libSDL problem.  I see mentions to this problem in earlier posts, but not concerning 3.5.4...

Here is a detailed account of my problems with Frodo:

The icon for Frodo under Games doesn't do anything.

Upon further inspection, when I type `frodo` at the command prompt, I get this:
-sh: frodo: Permission denied

`which frodo` reveals:
/opt/QtPalmtop/bin/frodo

which is a directory...

if I attempt to run frodostart under /opt/QtPalmtop/bin/frodo, I get:

error: CmdPipe: unable to execute child process wish
~CmdPipe child process returned error
QT_GetMachine: /proc/cpuinfo is Processor       : Intel StrongARM-1110 rev 9 (v4l)
BogoMIPS        : 137.21
Features        : swp half 26bit fastmult
CPU implementor : 0x69
CPU architecture: 4
CPU variant     : 0x0
CPU part        : 0xb11
CPU revision    : 9

Hardware        : Sharp-Collie
Revision        : 0000
Serial          : 0000000000000000

 detected machine is 'Sharp SL-5500'
QT_GetRotation: Read spec from '/tmp/qtembedded-root/QtEmbedded-0.spec'
 Rot=0, Qvga=0
Fatal signal: Segmentation Fault (SDL Parachute Deployed)

I installed the package by using `ipkg install frodo -dest sd` and then
`ipkg-link add frodo`

This is with the SL-5500 or collie.

--

Title: Libsdl Applications Not Working With Oz 3.5.4
Post by: fooman on August 03, 2006, 10:50:23 am

For Frodo, did you install the C64 ROMs?  You must get them from somewhere and install them into /opt/QtPalmtop/bin/frodo as described on the Frodo homepage.  Be sure to give them the exact same names, i.e. "Kernal ROM", "Char ROM", "1541 ROM" and "Basic ROM".

Quote

Both e-uae and Frodo (4.2-r1) do not work straight from package installation from the 3.5.4 feed.  I believe that it is a libSDL problem.  I see mentions to this problem in earlier posts, but not concerning 3.5.4...

Here is a detailed account of my problems with Frodo:

The icon for Frodo under Games doesn't do anything.

Upon further inspection, when I type `frodo` at the command prompt, I get this:
-sh: frodo: Permission denied

`which frodo` reveals:
/opt/QtPalmtop/bin/frodo

which is a directory...

if I attempt to run frodostart under /opt/QtPalmtop/bin/frodo, I get:

error: CmdPipe: unable to execute child process wish
~CmdPipe child process returned error
QT_GetMachine: /proc/cpuinfo is Processor       : Intel StrongARM-1110 rev 9 (v4l)
BogoMIPS        : 137.21
Features        : swp half 26bit fastmult
CPU implementor : 0x69
CPU architecture: 4
CPU variant     : 0x0
CPU part        : 0xb11
CPU revision    : 9

Hardware        : Sharp-Collie
Revision        : 0000
Serial          : 0000000000000000

 detected machine is 'Sharp SL-5500'
QT_GetRotation: Read spec from '/tmp/qtembedded-root/QtEmbedded-0.spec'
 Rot=0, Qvga=0
Fatal signal: Segmentation Fault (SDL Parachute Deployed)

I installed the package by using `ipkg install frodo -dest sd` and then
`ipkg-link add frodo`

This is with the SL-5500 or collie.

--
[div align=\"right\"][a href=\"index.php?act=findpost&pid=121795\"][{POST_SNAPBACK}][/a][/div]