OESF Portables Forum
Everything Else => Zaurus Distro Support and Discussion => Distros, Development, and Model Specific Forums => Archived Forums => Angstrom & OpenZaurus => Topic started by: Hrw on March 17, 2006, 07:50:36 am
-
Requests for packages which are in OE and need to be upgraded and added to the (upgrades) feed.
Rules the same as in previous versions:
1. package MUST already exist in OpenEmbedded
2. it has to be package - we won't build whole OPIE
Thread will get open after release.
List of packages which was available without upgrades. (http://ewi546.ewi.utwente.nl/tmp/hrw/t/oz354-packages-list.txt)
Please do not start offtopic discussions here - I'm going to clean from time to time.
-
I moved some stuff from feed/x11/ to feed/base/
Added:
- keymap-locales by CoreDump
This package show how to modify kernel keymap to get localized characters on collie and c7x0.
-
The rsync ipk seems to be missing, or am I missing a feed? thks
Added:
- keymap-locales by CoreDump
This package show how to modify kernel keymap to get localized characters on collie and c7x0.[div align=\"right\"][{POST_SNAPBACK}][/a][/div] (http://index.php?act=findpost&pid=119274\")
I'd really love to be able to figure out some missing keys on my poodle under GPE (ctrl-c comes to mind). What do I do?
Any chance of getting [a href=\"http://ipkgfind.handhelds.org/details.phtml?package=greader&official=&format=]greader[/url] to work under GPE? I'm tring to get it running, but I may be mistaken that currently GPE doesn't use GTK2?
Otherwise, if anybody could PLEASE recomend a GPE book reader?
thks
-
I have a couple of requests...
gnupg - versions older than 1.4.2.2 are susceptible to a signature spoofing attack.
otpkeygen - Also mentioned in an earlier thread. I checked the 3.5.4 feeds and didn't see it anywhere in the 3.5.4 directories.
Thanks and great job...
--Storm
-
Added:
- gnupg 1.4.2.2 (security fix)
- otpkeygen 1.3.0 (readded after fixing packaging)
- rsync 2.6.7
- iqnotes 2.1.0rc1 (as 2.0.99-2.1.0rc1)
- gnumeric 1.6.2
- abiword 2.4.2
- mplayer-atty 1.1.5 (for c7x0)
- alsa 1.0.10 stuff (mplayer-atty needs libasound)
- gdb 6.3
After using otpkeygen few times I'm thinking about removing it from feed. It looks like shit (hardcoded font names & sizes), removed qpe.conf on my Z so I had to configure appearance again...
Or one day I will look inside of it and patch it to behave correctly.
grog: provide sources for greader first..
-
Added:
- gnupg 1.4.2.2 (security fix)
- otpkeygen 1.3.0 (readded after fixing packaging)
- rsync 2.6.7
- iqnotes 2.1.0rc1 (as 2.0.99-2.1.0rc1)
After using otpkeygen few times I'm thinking about removing it from feed. It looks like shit (hardcoded font names & sizes), removed qpe.conf on my Z so I had to configure appearance again...
Or one day I will look inside of it and patch it to behave correctly.
[div align=\"right\"][a href=\"index.php?act=findpost&pid=119436\"][{POST_SNAPBACK}][/a][/div]
So thats what the problem is... I emailed the author just prior to my posting the original request, and he told me that he didn't have anything with OZ, but that "just recompiling" should fix the wiped-out appearance problem.
I agree that it looks terrible, but in spite of its problems, its the only app that I have found that fills its particular niche. And I do use one-time passwords fairly extensively.
Thanks again, HRW.
--Storm
-
grog: provide sources for greader first..[div align=\"right\"][{POST_SNAPBACK}][/a][/div] (http://index.php?act=findpost&pid=119465\")
Thanks hrw. I've emailed the maintainer (Greg Berenfield) to see if he can provide it.
Is there any way that I can see what packages are available in OE, short of checking out the whole source tree?
[a href=\"http://ewi546.ewi.utwente.nl/tmp/hrw/t/oz354-packages-list.txt]http://ewi546.ewi.utwente.nl/tmp/hrw/t/oz3...ckages-list.txt[/url]
[div align=\"right\"][a href=\"index.php?act=findpost&pid=119641\"][{POST_SNAPBACK}][/a][/div]
Actually, to confirm, I want a list of packages available in OE, so I could check to see if there's anything I'd like to request to have moved to OZ. Am I understanding correctly that not all OE packages are currently packaged in the OZ feeds, and is this the list I need? thks
-
http://ewi546.ewi.utwente.nl/tmp/viewmtn/ (http://ewi546.ewi.utwente.nl/tmp/viewmtn/) - .oz354x is branch used for 3.5.4 upgrades/3.5.4.1 and I can take stuff from .dev
guys: I removed some maemo related stuff from feeds and will rebuild parts of GPE - for example gpe-filemanager
-
Hi guys,
With ekiga 2.0 now released would it be feasible to run it on gpe ? If yes would it be something you could add to the gpe feed ?
Thanks again Hrw for your tremendeous job
-
15:29 koen would recommend minisip for VOIP till we get ekiga,tapioca or telepathy in
-
15:29 koen would recommend minisip for VOIP till we get ekiga,tapioca or telepathy in
Cool I didn't know this one. i will give it a try.
/me happy
Cheers !!
-
Requesting that Gaim include the following protocols by default:
Jabber
Yahoo
Oscar
MSN
IRC
Currently, only Jabber and IRC are enabled by default. The others require manual install.
Suggest that alert sounds be enabled by default.
Also, suggest that Gaim include an encryption plugin like OTR, or gaim-encryption.
Thanks,
Randall.
-
The sudo package (http://ewi546.ewi.utwente.nl/mirror/www.openzaurus.org/official/unstable/3.5.4//feed/base/sudo_1.6.8p12-r4_arm.ipk) seems to have lost it's suid bit on the binary. thks
-
rrnwexec: gaim will stay as it is - we prefer to not force too much deps.
grog: submit bug for that sudo thing
---------------------------------
Changes in feeds:
- removed all maemo related stuff
- rebuilded all packages which found broken
- firefox is instalable now
- thunderbird is instalable now
Tosa got "keymaps" package in newer version - with fixed numbers problem.
-
My two main PDA applications on PDAXROM are dillo and korganizer / kopi. Is there a version of korganizer for gpe/oz.
Sorry if I am missing something
-
My two main PDA applications on PDAXROM are dillo and korganizer / kopi. Is there a version of korganizer for gpe/oz.
[div align=\"right\"][a href=\"index.php?act=findpost&pid=119947\"][{POST_SNAPBACK}][/a][/div]
Try using gpe-mini-browser instead of dillo, it's faster and supports more stuff (css, javascript, AJAX, etc)
-
My two main PDA applications on PDAXROM are dillo and korganizer / kopi. Is there a version of korganizer for gpe/oz.
[div align=\"right\"][a href=\"index.php?act=findpost&pid=119947\"][{POST_SNAPBACK}][/a][/div]
Try using gpe-mini-browser instead of dillo, it's faster and supports more stuff (css, javascript, AJAX, etc)[div align=\"right\"][a href=\"index.php?act=findpost&pid=119969\"][{POST_SNAPBACK}][/a][/div]
I actually just installed dillo 'cause I couldn't get gpe-mini-browser to open local files. Maybe you can stear me back of the right path . In dillo there's a menu option to open a local file with a file browser. Not much to offer in mini other than the url box, & no matter what I typed in it wouldn't open a page that dillo or even links has no problems with.
As well, mini didn't recognize simple href tags pointing within the same page that work fine in all other browsers I've seen. Any idea about that?
thks
-
grog: submit bug for that sudo thing[div align=\"right\"][{POST_SNAPBACK}][/a][/div] (http://index.php?act=findpost&pid=119883\")
done - [a href=\"http://bugs.openembedded.org/show_bug.cgi?id=773]#773[/url]
-
The man package (http://ewi546.ewi.utwente.nl/mirror/www.openzaurus.org/official/unstable/3.5.4//feed/base/man_1.5p-r1_arm.ipk) understandably depends on groff, which is nowhere to be found (even on ipkgfind). Is it available to be added? I'd love to be able to have the man pages installed on my sd card!
-
Added groff
-
mpc and ncmpc are in the feed but not the daemon mpd, tried compiling it, using binaries fom other pakages and other such unspeakable things and couldnt get it to work
do you want this as a bug report, or just leave it as it is?
-
Added:
- mpd
Changed:
- updater.sh for tosa (in images/tosa) which will use also zImage.bin as kernel (like it is on clamshells)
-
Added:
- fbvncserver-kmodule for collie and poodle
-
I think xoscope,
http://xoscope.sourceforge.net/ (http://xoscope.sourceforge.net/)
or something like it would be interesting on a Collie.
I have used it on my powerbook in combination with
a homemade electromagnetic field detector that I plug
into my audio in port.
The screen on the Collie is a little small, and may pose
a problem in porting xoscope, but if sound in is working
(is it? I have not been able to record memo on GPE yet,
but that may be just my problem) this would be a great
device for acquiering all sorts of interesting low voltage
signals.
(EMF meter: some inductors, an opamp (optional if you
have enough inductors or big enough coil), germanium
diodes to keep voltage swing close to half a volt, an audio
transformer (also optional), a 1/8 miniplug jack, and
male-male cable.)
-
<snip>
- firefox is instalable now
- thunderbird is instalable now
Tosa got "keymaps" package in newer version - with fixed numbers problem.
[div align=\"right\"][a href=\"index.php?act=findpost&pid=119883\"][{POST_SNAPBACK}][/a][/div]
I tried installing firefox and thunderbird to the SD card. Neither work.
During the install, the dependency issues seem to be fixed however cannot run the programs as neither knows where to find libraries... Is there a way to fix the paths in the ipk so that everything can find what it needs in order to run?
Thanks.
-
For local files with gpe-mini-browser, try file:///path/to/your/file.html.
That's three slashes: two for the file:// (like ftp:// or any other protocol), and then one to begin the path to the file. So, if you wanted to view the configuration of your local samba server in gpe-mini-browser (don't ask me why you'd want to do that), it'd be file:///etc/samba/smb.conf .
-
installing to sd.. One day I have to check it - but first my SD cards must be supported by linux-2.6 ;( Currently my biggest working card is 16M MMC one which I use to flash kernels.
Or I will install to CF card (256M) but this makes me to choice.. cf mem or cf wifi - what for install firefox when there is no net ;(
-
Added groff[div align=\"right\"][a href=\"index.php?act=findpost&pid=120052\"][{POST_SNAPBACK}][/a][/div]
Thanks! [div align=\"right\"][a href=\"index.php?act=findpost&pid=120073\"][{POST_SNAPBACK}][/a][/div]
I had to make this wrapper script in /usr/local/bin/man to set some variables for it to work properly. Can these be fixed in the packages build?
grog@grond[pts/0][/home/local/bin]$ cat man
#!/bin/sh
# man wrapper
export GROFF_FONT_PATH='/usr/share/groff/1.19.1/font'
export GROFF_TMAC_PATH='/usr/share/groff/1.19.1/tmac:/usr/share/groff/site-tmac'
unset PAGER
exec /usr/bin/man $@
-
Added:
- zbedic 1.0
-
installing to sd.. One day I have to check it - but first my SD cards must be supported by linux-2.6 ;( Currently my biggest working card is 16M MMC one which I use to flash kernels.
Or I will install to CF card (256M) but this makes me to choice.. cf mem or cf wifi - what for install firefox when there is no net ;(
[div align=\"right\"][a href=\"index.php?act=findpost&pid=120301\"][{POST_SNAPBACK}][/a][/div]
HRW, I can send you a larger SD card if that would help. I have one that I'm not using... Is there a specific type of SD that works with the 2.6 kernel?
-
rrnwexec: working/non working it depends on something but I do not know yet what it is.. Best way is checking on Zaurus with 2.6 kernel ofcourse but not everyone have this possibility. I've seen cards which looked identical but one worked, second gave timeouts and other errors. Supporting closed specs things in Linux is a problem - there are many cards which does not work and noone has specs to check why ;(
-
I will provide hostap update for OZ 3.5.4 soon.
Details:
- all modules version will be the same
- /etc/pcmcia/hostap_cs.conf moved into hostap-conf package
this is how we have it done in 3.5.4.1 - I got Pretec WiFi card today which works nice with hostap but 3.5.4 machines could try to use it with orinoco driver instead.
-
Please add matchbox-applet-cards . thks
-
... gpe-mini-browser didn't recognize simple href tags pointing within the same page that work fine in all other browsers I've seen. Any idea about that?[div align=\"right\"][{POST_SNAPBACK}][/a][/div] (http://index.php?act=findpost&pid=119971\")
[a href=\"http://bugs.openembedded.org/show_bug.cgi?id=800]bug #800 posted[/url]
-
Is there any way that I can see what packages are available in OE, short of checking out the whole source tree?
http://ewi546.ewi.utwente.nl/tmp/hrw/t/oz3...ckages-list.txt (http://ewi546.ewi.utwente.nl/tmp/hrw/t/oz354-packages-list.txt)
[div align=\"right\"][a href=\"index.php?act=findpost&pid=119641\"][{POST_SNAPBACK}][/a][/div]
Actually, to confirm, I want a list of packages available in OE, so I could check to see if there's anything I'd like to request to have moved to OZ. Am I understanding correctly that not all OE packages are currently packaged in the OZ feeds, and is this the list I need? thks
[div align=\"right\"][a href=\"index.php?act=findpost&pid=119604\"][{POST_SNAPBACK}][/a][/div]
According to this list, minimo isn't available in OE. Am I looking at the right list? thks
-
That's not the correct list, try
http://ewi546.ewi.utwente.nl/tmp/viewmtn/m...8&path=packages (http://ewi546.ewi.utwente.nl/tmp/viewmtn/manifest.psp?id=673bca9251529537e80eaed829b3fd18917250e8&path=packages)
for the list of package dirs or
http://ewi546.ewi.utwente.nl/tmp/viewmtn/m...ackages/mozilla (http://ewi546.ewi.utwente.nl/tmp/viewmtn/manifest.psp?id=673bca9251529537e80eaed829b3fd18917250e8&path=packages/mozilla)
for the mozilla dir.
-
That's what I'm talkin' about!! Thanks Koen
Could we have minimo added to the feed please? thks
-
I think this kind of information should be added to the docs somewhere... but where... ?
I've come up with that : http://oe.handhelds.org/cgi-bin/moin.cgi/H...xistingPackages (http://oe.handhelds.org/cgi-bin/moin.cgi/HowToCheckForExistingPackages) ... tell me what you think.
-
altboot for Poodle please (it seems to be missing).
thx,
radioz
-
Could we have minimo added to the feed please? thks
[div align=\"right\"][a href=\"index.php?act=findpost&pid=121297\"][{POST_SNAPBACK}][/a][/div]
First it would need some hacking, because it won't compile in current state of the .oz354x OE repository (http://bugs.treke.net/show_bug.cgi?id=692)
-
added:
- matchbox-applet-cards
- matchbox-applet-tasks
- altboot for poodle
- altboot 1.0.6-rc1 for tosa
- gimp 2.3.3
updated:
- iqnotes 2.0.2
- iqnotes 2.1.0-rc1
-
Could dosbox be added? thks
-
Hey guys,
What happened to the scumvm-qpe package ? It seems to have disappear from the X11 feed...
Could you put it back online please ?
Thanks in advance !
-
Please add the tarball-e-image for tosa with the right kernel. It is expecting 3.4rc kernel. gpe-tarball works well.
I am facinated by your work, especially altboot is fine.
Thank you!
Sebastian
-
grog: I was able to dosbox 0.63 and 0.65 but both segfaults on my Z ;(
mislurel: thx for noticing - will rebuild it on days.
letic: 3.5.4/feed/base/scummvm-qpe_0.6.1b-r0_arm.ipk you mean?
-
grog: I was able to dosbox 0.63 and 0.65 but both segfaults on my Z ;([div align=\"right\"][a href=\"index.php?act=findpost&pid=122176\"][{POST_SNAPBACK}][/a][/div]
Thanks for trying.
-
Can the qte package be modified to include codecs (i.e. remove the QT_NO_CODECS flag), or perhaps could an alternative package (qte-with-codecs) be created?
I am currently trying to port a Japanese input method (qpobox), something that is currently missing from Opie and, I believe, has prevented a lot of Japanese users from switching over to OZ. However, it, as well as a lot of other Japanese Qtopia-based software, depends on QTextCodec (in this case, QTextCodec("EUC-JP")).
In the meantime, is there any simple way that I can build it myself? The QT_NO_CODECS flag doesn't seem to be coming from the .bb file.
- ashikase
- anpachi, gifu, japan
-
To make Qt/Embedded fit with our new KDE 3.5 Konqueror, we need to touch the qte configuration anyway. We will consider enabling the codecs.
-
Big pack landed in upgrades:
- rdesktop 1.4.1
- libmatchbox 1.8
- matchbox-wm 1.0
- udev 0.84
- zsh 4.1.1
- util-linux 2.12q
- ttf-gentium 1.02
- xserver-common
- xprint
- twin 0.4.6
- quilt 0.39
- guards 0.39
- nfs-utils 1.0.6
- netpbm 10.28
- microwindows 0.90
- libfakekey
- inputpipe-client
- ifupdown 0.6.4
- espgs 7.07
- dhcp 3.0.2
- libx11 6.2.1 with XIM
- cyrus-imapd
- devlabel 0.45.01
- pmacct 0.7.9
- octave 2.1.63
- nsd 2.0.0
- ghostscript 8.16
- gqview 2.1.1
- ffmpeg 0.4.9-pre1
- mplayer 1.0pre7 with config
- cups 1.1.23
- cpufreqd 1.1.2
- gammu 1.05.00
lot of stuff in other words
E17 images for tosa was also rebuilt
-
Added cpufreqd 1.1.2
I presume this only works with 2.4 kernels?
Any news on 2.6 cpu scaling?
-
c7x0 has cpu scaling under 2.6 kernel
cxx00 does not have it yet
-
Added:
- hostap-modules 0.4.7 for collie/poodle/tosa
- hostap-utils 0.4.7
- hostap-conf 1.0
-
I have a feeling this isn't the proper thread for this request, since it's not currently implemented, but...
I, of course, request BVDD driver support. It should increase the framebuffer performance greatly for apps that support it such as mplayer.
Here's the driver zipped up, ripped from mplayer-bvdd release:
http://www.friggingames.com/bvdd.zip (http://www.friggingames.com/bvdd.zip)
Just edit the two lines in the Makefile so it points to the cross-compile gcc and the kernel sources directory. Hopefully it's not much more work than that. Not sure if it should be a module/kernel patch. But it would be nice to see this supported any possible way.
I'd give it a compile but the kernel source's don't seem to be available publicly.
Thanks.
-
letic: 3.5.4/feed/base/scummvm-qpe_0.6.1b-r0_arm.ipk you mean?
oops sorry I thought it was in X11
My apologies
Thanks for the tosa e17 new build !
-
Can someone add a build of fbreader, there is a .bb file attached to this bug report
http://bugs.openembedded.org/show_bug.cgi?id=720 (http://bugs.openembedded.org/show_bug.cgi?id=720)
However I have been unable to complile it, it seems to be missing a .h file.
Thanks,
darmou
-
Fixed initscripts are in upgrades - everyone who got "wrong kernel" message on boot should upgrade.
Sorry for that.
-
Added:
- fbreader 0.7.3b (thx goes to John 'JohnX' Bloom for making recipes for it)
Updated:
- ipkg-link
-
how about cd burning tools, had a problem with windows and the only machine that was capable of burning was my c3k, unfortunattly i couldnt find any packages
-
Da_blitz: no cdrecord in OpenEmbedded.
Changes:
- some packages get PR bumped
- irk-belkin/irk-targus are installable now without problems
- ipkg-link updated
-
Added:
- gpe-windowlist
13 11:16 < hrw|work> koen: btw - what it is?
13 11:16 < koen> hrw|work: a windowlist applet like mb-applet-windows
13 11:16 < koen> but without the libwnck dependency
-
Could we have minimo added to the feed please? thks[div align=\"right\"][{POST_SNAPBACK}][/a][/div] (http://index.php?act=findpost&pid=121297\")
Is there anyone working on [a href=\"http://bugs.treke.net/show_bug.cgi?id=692]bug 692[/url]? I'd still like to give minimo a try. thks
-
Updated:
- hostap-conf (added few cards)
- keymaps for c7x0
now all clamshells has working LCD Softkeys - We have extra 11 keys due to this (spaces are also keys)
-
To make Qt/Embedded fit with our new KDE 3.5 Konqueror, we need to touch the qte configuration anyway. We will consider enabling the codecs.
[div align=\"right\"][a href=\"index.php?act=findpost&pid=122334\"][{POST_SNAPBACK}][/a][/div]
Just as a note, I was able to enable the codecs myself by removing the QT_NO_CODECS flag from packages/qte/qte-2.3.10/qpe.patch and recompiling. With this fixed library in-hand and a bit of coding, I was able to get QPobox (Japanese input method) working with Opie.
Thus, it would certainly be a great help if the codecs could be enabled by default.
- ashikase
- anpachi, gifu, japan
-
Upgraded:
- gpe-bootsplash (will not try to write to ReadOnly filesystem)
- wpa-supplicant 0.4.8 (should get WPA working)
More info: https://www.oesf.org/forums/index.php?showtopic=18848 (https://www.oesf.org/forums/index.php?showtopic=18848)
-
Added:
- abiword 2.4.2
[div align=\"right\"][a href=\"index.php?act=findpost&pid=119436\"][{POST_SNAPBACK}][/a][/div]
Abiword 2.4.4 is now available in the .oz354x branch, as well as abiword-plugins. The most notable features:
* opendocument support
* hancom documents support
* working spellcheck (although it's missing wordlists)
hrw: could you add abiword 2.4.4, abiword-plugins 2.4.4, poppler 0.5.1, enchant 1.2.5, libwpd 0.8.1 and gtkmathview 0.7.6 to the upgrades feed (bitbake abiword-plugins should build them all)?
-
To make Qt/Embedded fit with our new KDE 3.5 Konqueror, we need to touch the qte configuration anyway. We will consider enabling the codecs.
[div align=\"right\"][a href=\"index.php?act=findpost&pid=122334\"][{POST_SNAPBACK}][/a][/div]
Just as a note, I was able to enable the codecs myself by removing the QT_NO_CODECS flag from packages/qte/qte-2.3.10/qpe.patch and recompiling. With this fixed library in-hand and a bit of coding, I was able to get QPobox (Japanese input method) working with Opie.
Thus, it would certainly be a great help if the codecs could be enabled by default.
Excellent. Can you release that "bit of coding" somewhere?
-
Added:
- opie-stumbler (tool to search for open wireless networks and join them)
-
Just wondering if you can add jamvm, it's in openembedded but not in the feed.
Thanks,
darmou
-
Excellent. Can you release that "bit of coding" somewhere?
[div align=\"right\"][a href=\"index.php?act=findpost&pid=123170\"][{POST_SNAPBACK}][/a][/div]
I submitted the necessary info to the OE bugtracker (bugs #842, #843).
- ashikase
- anpachi, gifu, japan (soon to be osaka)
-
Please add evince to the upgrades feed: A discussion about this is here:
https://www.oesf.org/forums/index.php?act=S...t=0#entry123612 (https://www.oesf.org/forums/index.php?act=ST&f=147&t=18907&st=0#entry123612)
Thanks muchly,
darmou
-
I just added epdfview to the branch, which is a lightweight gtk+ pdf reader.
Hrw: could you add it to the feeds?
-
I just added epdfview to the branch, which is a lightweight gtk+ pdf reader.
Hrw: could you add it to the feeds?
[div align=\"right\"][a href=\"index.php?act=findpost&pid=123618\"][{POST_SNAPBACK}][/a][/div]
Thank Koen, you rock! what happened to your feed btw. When I got asked about evince and xpdf they were only avaliable from your feed.
darmou
-
Please add lynx to the feeds!
- And: I cannot install ipkg-utils because of missing dependencies to "python", what exactly is the relevant package? I have installed some pythons but no result.
- And: Does ipkg-utils include the programms to re-compile arm.deb to .ipk?
Thank you for your help!
Sebastian
-
Please add lynx to the feeds![div align=\"right\"][a href=\"index.php?act=findpost&pid=123673\"][{POST_SNAPBACK}][/a][/div]
I'm not saying that adding lynx isn't a good idea, but give 'links' a try (it's already there). I like it better (it does frames too!!).
-
I'm not saying that adding lynx isn't a good idea, but give 'links' a try (it's already there). I like it better (it does frames too!!).
[div align=\"right\"][a href=\"index.php?act=findpost&pid=123680\"][{POST_SNAPBACK}][/a][/div]
I tried to give it a try, but: "libncurses.so.5 not found, no such directory". Sorry!
-
I tried to give it a try, but: "libncurses.so.5 not found, no such directory". Sorry!
Install ncurses, submit a bug if this was not in the depends for the program in question.
Si
-
I tried to give it a try, but: "libncurses.so.5 not found, no such directory". Sorry!
Install ncurses, submit a bug if this was not in the depends for the program in question.
[div align=\"right\"][a href=\"index.php?act=findpost&pid=123738\"][{POST_SNAPBACK}][/a][/div]
Correct, libcurses is not listed as a depends for links. I already had it installed from other stuff, that's why it wasn't a problem for me.
-
ERROR: Cannot satisfy the following dependencies for fbvncserver:
fbvncserver-kmodule
Seems it's not in the feed. I've manually checked the sub directories on the feed sites except for ../locale
Can this be added to the feed? fbvncserver depends on it.
-
ERROR: Cannot satisfy the following dependencies for fbvncserver:
fbvncserver-kmodule
Seems it's not in the feed. I've manually checked the sub directories on the feed sites except for ../locale
Can this be added to the feed? fbvncserver depends on it.
[div align=\"right\"][a href=\"index.php?act=findpost&pid=123839\"][{POST_SNAPBACK}][/a][/div]
I second that request, I'm trying to get the pocketop irda keyboard working and the drives require vncserver.
darmou
-
I guess I should have added my request here. I would like to use the FUSE kernel module in 3.5.4.1
Source code here: http://sourceforge.net/project/showfiles.p...ckage_id=132802 (http://sourceforge.net/project/showfiles.php?group_id=121684&package_id=132802)
-
Added:
- abiword 2.4.4
- abiword-plugins 2.4.4 (some can stop abiword loading)
- enchant 1.2.5
- libwpd 0.8.4
- poppler 0.5.1
- epdfview 0.1.2
- xmame 0.100
Updated:
- opie-bluepin 1.2.1-r2 with wrapper (so it should work now)
Info:
- fbvncserver-kmodule for collie/poodle is already available in upgrades/machine/ feeds
Fuse: request it in OE bugtracker as it need kernel modules AND userspace apps.
Links does not need libncurses - it need gpm which need ncurses. And all those libs are installed when "ipkg install links" is used (just checked).
-
Can you add the option to zaurusd so that closing the lid to the clamshells only turns off the backlight, not suspend?
Thanks,
Jerry
-
Fuse: request it in OE bugtracker as it need kernel modules AND userspace apps.
[div align=\"right\"][{POST_SNAPBACK}][/a][/div] (http://index.php?act=findpost&pid=123901\")
Done: [a href=\"http://bugs.openembedded.org/show_bug.cgi?id=884]oe bugtracker[/url]
Thanks Hrw!
-
I'm tired of being an OZ heathen.
Please implement gnome-sword in the 3.5.4.x upgrades.
Thank you.
-
Thanx hrw and others for help. links now works, I had ncurses installed as well, after re-installation of ncurses links works fine - thank you. I am just experimenting ...
Sebastian
-
Can we please enable hostap driver in wpa_supplicant? it is as easy as uncommenting single line in defconfig CONFIG_DRIVER_HOSTAP=y
Wpa_supplicant tends to work best with hostap driver in native mode, especially when authenticating with 802.11x networks. Using 0.4.8 with hostap driver disabled I cannot connect to wireless network at my workplace.
I tried to build wpa_supplicant myself but I think I didnt configure the tree properly because it used gcc 4
Thanks.
-
0xDEADBEEF: will do it (now I have it building but with hacks)
Antikx: gnome-sword is building
jerrybme: report it as a bug in OE bugtracker so RP will notice that not only I do not like this option
Added:
- wpa-supplicant 0.4.8 with Hostap and Hermes support
- evince 0.5.2
- gnomesword 2.1.2
- libgtkhml 3.6.2
-
jerrybme: report it as a bug in OE bugtracker so RP will notice that not only I do not like this option
[div align=\"right\"][a href=\"index.php?act=findpost&pid=123998\"][{POST_SNAPBACK}][/a][/div]
-
jerrybme: report it as a bug in OE bugtracker so RP will notice that not only I do not like this option
[div align=\"right\"][a href=\"index.php?act=findpost&pid=123998\"][{POST_SNAPBACK}][/a][/div]
Done, thanks
-
I can't find any good RSS reader for OPIE. Hrw, do you know one to put in update feed?
-
enodr: I do not know any good RSS reader.. I only know about corsair.
Added:
- corsair 0.2.0 (with patch from 'mistermix' https://www.oesf.org/forums/index.php?showtopic=14661) (https://www.oesf.org/forums/index.php?showtopic=14661))
- kexec-tools 0.101 (will be useful for 3.5.4.1 machines)
-
Thanks for corsair. Btw I have added a bug on opiebugtracker for opie-stumbler. It's crashing on my C3200 with hostap.
-
Added:
- altboot 1.0.6 for collie/poodle/tosa
- x/qt
Rebuilt:
- xserver-kdrive
- bootlogd
-
Marcin,
with alpha1-2 and rc1 releases I see in the logs some quirks:
- mount: sysfs cannot be mounted
- gpe system info : df has problem reading ./dev/static
- ipaq-sleep :needs bl but then bl doesn't find /dev/touchscreen0
I think ipaq-sleep and bl need to be rebuilt.
TIA
Ant
-
the one on the slidrulez homepage is for the older, compat libs. tried to complie it for native OZ and i get software vs. hardware FP compile time errors.
-
I found that xmame produced an error on runtime on my 3100. Has anyone got it working?
darmou
-
fsck.. merged topics in wrong way ;(
Added:
- sliderulez
Updated:
- gammu 1.06.00
- bluez-utils (now with hid2hci and usb support)
- nfs-utils
Fixed:
- openttd 0.4.0
-
Marcin,
with alpha1-2 and rc1 releases I see in the logs some quirks:
- mount: sysfs cannot be mounted
- gpe system info : df has problem reading ./dev/static
- ipaq-sleep :needs bl but then bl doesn't find /dev/touchscreen0
I think ipaq-sleep and bl need to be rebuilt.
TIA
Ant
[div align=\"right\"][a href=\"index.php?act=findpost&pid=124612\"][{POST_SNAPBACK}][/a][/div]
You may want to add bug reports un bugs.treke.net eventually ?
-
XMMS, since beep-media-player doesn't work on 3100
-
Request:
3.5.4 cardfs for Poodle to use with altboot.
Thanks for all the work!
radioz
-
hola!
could you please recompile totem without lirc support or add lirc package ?
totem is only installable with -force-depends, but then complains about missing liblirc.
would be quite nice to have a _gui_ media player for gpe (i know there's mplayer...)
btw: where went gxine ?
thanks a lot !
-
Updated:
- hostap-conf
- orinoco-conf
some wifi cards should move from eth0 to wlan0 (orinoco -> hostap) after this upgrade
-
You may want to add bug reports un bugs.treke.net eventually ?
[div align=\"right\"][a href=\"index.php?act=findpost&pid=125090\"][{POST_SNAPBACK}][/a][/div]
I haven't yet full understood the bug(s)...I'll do it later on.
I'll wait for the rc-2, then I'll install root-filesystem in order to check the /dev thing.
The problem could be missing devices or, more probably, some SUID bugs so that the permissions are wrong.
I got ppp working by manually adding /dev/rfcomm0 and /dev/ppp in "/lib/udev/devices/.
/etc/init.d/udev
# I hate this hack. -- Md
make_extra_nodes() {
if [ "$(echo /lib/udev/devices/*)" != /lib/udev/devices/*" ]; then
cp -a /lib/udev/devices/* /dev/
fi
-
ant: if bug was not reported then it was not probably fixed.
-
Updated:
- sylpheed 2.2.4
- vlc-gpe 0.8.4
- gpe-clock 0.25
- gpe-filemanager 0.25
- gpe-plucker 0.2
-
Added:
- wpa-gui 0.4.8 (QT3/X11 gui to scan/discover/configure WiFi networks with WEP/WPA/WPA2 support)
- irdadump 0.9.16
Upgraded:
- mysql 4.1.18
- visiscript 0.4.3
I also want to give pregenerated locales for OZ 3.5.4 but this will need more testing as it upgrade libc6 so it has to be done properly or system will broke. Probably I will give it in final 3.5.4.1 images and some time after will release 3.5.4.2 for collie/tosa/poodle (3.5.4.2 will be 3.5.4 + upgrades basically - any 3.5.4 user should be able to upgrade via 'ipkg update;ipkg upgrade').
-
just some things i would like:
usb-audio (kernel module)
zkbdd
and some bug fixes
man still broken "invalid device 'latin1'"
zsh symlink /usr/bin/zsh incorectly points to Hrw's home dir (which dosent exsist on my machine)
mpd has no universal init script (thogh some people like to run it as thier own user)
mpd dosent ship with /etc/mpd.conf file and dir structure is messed up (/var/lib/mpd, requires files and folders to be added)
/tmp (symlink to /var/tmp) has no stikybit set
running the bootstrap image and had to change TERM varible to linux to get color (not really a problem but IMHO if its running on a linux FB with the kernel doing term emulation then it should be set to t"linux)
no perl (automake fails as it is listed as a dependency
sorry for the list i have been caching these for awhile and never did get around to looking for that bugtracker, mabey could we get a program to auto submit bug reports? somithng quick whiped up in sh
-
1. report bugs to bugtracker
2. patches are welcome
3. perl is in feed/perl/ - I will take care of it being in preconfigured feeds
zkbdd is in my experimental: http://ewi546.ewi.utwente.nl/tmp/hrw/3.5.4x-experimental/ (http://ewi546.ewi.utwente.nl/tmp/hrw/3.5.4x-experimental/)
-
Thanks alot, the one thing i have noticed about OZ is that the pakages dont seem to have the same level and intergration as some of the PC distros, id say its about 95% there but things like default PAM rules and other such stuff are not installed by default or config files being left off
i guess its time for me to have another look at OE and update some pakages by hand (i really want to add htop, rtorrent and some other utility packages)
-
Upgraded:
- gtk 2.6.10 - close #990 (http://bugs.openembedded.org/show_bug.cgi?id=990)
- pango 1.8.1 - close #989 (http://bugs.openembedded.org/show_bug.cgi?id=989)
- totem 1.0.4 - close #964 (http://bugs.openembedded.org/show_bug.cgi?id=964)
- libmimedir 0.3.1
- gxine 0.4.1 (without LIRC support)
Added:
- qpphoto 1.0.2 - close #985 (http://bugs.openembedded.org/show_bug.cgi?id=985)
- x/qt 2 - close #986 (http://bugs.openembedded.org/show_bug.cgi?id=986)
- zkbdd 0.2
- pipepanic 0.1.1
-
I would like to request: grisbi for X11 -- a decent relatively light-weight personal finance manager.
http://www.grisbi.org/download.en.html (http://www.grisbi.org/download.en.html)
Thanks!
-
Thanks alot, the one thing i have noticed about OZ is that the pakages dont seem to have the same level and intergration as some of the PC distros, id say its about 95% there but things like default PAM rules and other such stuff are not installed by default or config files being left off
Well, the obvious reason for this is that OZ is not a PC distro.
Always keep in mind that we are talking about PDAs with (usually) a very small rootfs.
Think Collies ~14Mb, or Poodles ~20Mb.
The SL-Cxx00 with 64 to 4000Mb are the exception, not the norm
When we create a package, all the superflous stuff gets thrown out due to space / RAM / CPU constraints.
Please try to do something like that (http://hentges.net/tmp/screenshots/Zaurus/Akita/Misc/essential-to-boot+wifi.jpg) with $RANDOM_PC_DISTRO
i guess its time for me to have another look at OE and update some pakages by hand (i really want to add htop, rtorrent and some other utility packages)
[div align=\"right\"][a href=\"index.php?act=findpost&pid=126342\"][{POST_SNAPBACK}][/a][/div]
-
Added:
-snip-
- pipepanic 0.1.1
I'm sorry Hrw, but your ipk in the upgrades feed is broken. It's missing the pics, data(bmp files), and the desktop files.
Greg
-
Greg2: good to know - will rebuild it and recheck.
-
Greg2: good to know - will rebuild it and recheck.
[div align=\"right\"][a href=\"index.php?act=findpost&pid=127176\"][{POST_SNAPBACK}][/a][/div]
You probably need the new sdl stuff mickeyl added to .dev a while ago. The opie .desktop file isn't supposed to be in that .ipk but in a seperate ipk that depends on the main .ipk
-
I'd like dump_cis etc. to help me diagnose why a card that should be supported by pcmcia card services doesn't work on OZ.
-
True about the small space but why not just make $pakage_name-conf.ipkg like we have for the man pages so they can be installed, this is how ipkg was intended to be used (pacakages broken down to the smallest usable component to install what you need)
i still belive that OE "feels" messy to use, i dont know how others fell it just seems to me to be a bit inonsistent thogh that might just be due to the fact that i tend to concentrate on the cmd line more, i havet used gpe or opie but it seems to me that the people who do havent needed to do nearly as many hacks by hand to get things running nicly
while im on about it the display-brightness ipkg has a bug, uses head -1 instead of head -n 1 (somewhere in the first 10 lines), bug trackers are nice but i dont like having to do the entire email thing, i would rather just report it and move on, im still willing to whip up that auto bug tracking program if you want it
Bugs being submitted now
your right thogh when you have 4G its easy to forget
-
Added:
- zsh 4.1.1 (fixed)
zsh 4.3.2 in my experimental: http://ewi546.ewi.utwente.nl/tmp/hrw/3.5.4x-experimental/ (http://ewi546.ewi.utwente.nl/tmp/hrw/3.5.4x-experimental/)
-
Plenty of little puzzle games (including sudoku) just waiting to be compiled and packaged for GPE : http://www.chiark.greenend.org.uk/~sgtatham/puzzles/ (http://www.chiark.greenend.org.uk/~sgtatham/puzzles/)
-
Thanks, cant live on the command line without it
-
Added:
- xmms 1.2.10 (that crappy gtk1 one)
- wifi-radar 1.9.6
- freenote 1.12.0
- puzzles r6712
- python-pyfits 1.0.1
- python-pyraf 1.2.1
Updated:
- pipepanic 0.1.1
-
Updated:
- samba 3.0.14a - after CoreDump fixes it should work ok
Downgraded:
- binutils 2.15.94.0.1 - removed version which was in feed.
if someone had binutils installed then please remove them and install 2.15.94.0.1 - otherwise no warranty that your soft will work.
-
Updated:
- samba 3.0.14a - after CoreDump fixes it should work ok
The Samba fix was provided by v8jlene @ #oe, many thanks!
-
CoreDump: thats the power of OpenEmbedded - fix from one platform help on other.
-
CoreDump: thats the power of OpenEmbedded - fix from one platform help on other.
[div align=\"right\"][a href=\"index.php?act=findpost&pid=128391\"][{POST_SNAPBACK}][/a][/div]
I couldn't agree more. For anyone interested, the original fix was for SH4 based devices
-
Added:
- bl 0.1 by Lardman
-
Upgraded:
- kdepim/pi 2.2.7
- mysql 4.1.18 (splitted into mysql-client and mysql-server)
- wpa-supplicant 0.4.8-r5 (script to autostart if needed was taken from OZ wiki (http://wiki.openzaurus.org/))
- xmame 0.100
-
I've got some packages I'd love to see added to 3.5.4 Hrw, most importantly
fltdj
which I'm surprised isn't in OZ already, and another fltk prog
zynaddsubfx
But will even an overclocked PXA270 have enough cpu horsepower to be able to handle zyn? I suppose we'll soon find out!
Two of my other fave Linux progs I really want to see in oe/oz, both dependant upon wxgtk, are
audacity
amule
EDIT:.
rox-filer please! Thats my fave GUI file manager now
British English dictionary for aspell
I couldn't run xmms under rc4 because it claimed libgtkstylus.so was missing
Thanks Hrw!
-
I've got some packages I'd love to see added to 3.5.4 Hrw, most importantly
fltdj
Gotta say I'm surprised fltdj hasn't been requested already. That will require fltk be added to oe if it hasn't been done so already, so I'd also like to see
zynaddsubfx
But will even an overclocked PXA270 have enough cpu horsepower to be able to handle zyn? I suppose we'll soon find out!
Two of my other fave Linux progs I really want to see in oe/oz, both dependant upon wxgtk, are
audacity
amule
EDIT:
Is dgen or generator in oe? That'd be cool too.
rox-filer please! Thats my fave GUI file manager now
I couldn't run xmms under rc4 because it claimed libgtkstylus.so was missing
Thanks Hrw!
[div align=\"right\"][{POST_SNAPBACK}][/a][/div] (http://index.php?act=findpost&pid=129640\")
Please read [a href=\"https://www.oesf.org/forums/index.php?showtopic=19095&view=findpost&p=119002]https://www.oesf.org/forums/index.php?showt...ndpost&p=119002[/url] before posting
-
Thanks for the link koen- I've updated my last posting after searching the package list.
-
I've got some packages I'd love to see added to 3.5.4 Hrw
rule #1: package must be in OpenEmbedded
fltdj - which I'm surprised isn't in OZ already, and another fltk prog
zynaddsubfx - But will even an overclocked PXA270 have enough cpu horsepower to be able to handle zyn? I suppose we'll soon find out!
Two of my other fave Linux progs I really want to see in oe/oz, both dependant upon wxgtk, are
audacity
amule
Those 4 are not in OE so will not be in OZ (until someone add them).
rox-filer please! Thats my fave GUI file manager now
same rule as previous (I do not like that filemanager btw - AppDir idea is sick)
British English dictionary for aspell
probably can be done
I couldn't run xmms under rc4 because it claimed libgtkstylus.so was missing
This is something to check - my c760 run opie currently..
UPDATE: Booted GPE on c7x0, installed XMMS from feed. It complain about lack of gtkstylus.so but run.
-
Upgraded:
- speex 1.1.12
-
rule #1: of OpenEmbedded package club, no one talks about OpenEmbedded package club
sorry just had to say it as these things get drowned out in noise and very few people will read 10+ pages unless they were there when it started
-
Upgraded:
- vim 7.0
Added:
- libqpe-dev
- libopie-dev
- libqte-dev
So next step into native compiling done.
-
Marcin,
would you care to compile for GPE this two packages (badly requested by my wife...otherwise I'm obliged to stick with Cacko... )?
ZMAHJONGG
http://only.mawhrin.net/~geometer/zaurus/z...hjongg-1.01.tgz (http://only.mawhrin.net/~geometer/zaurus/zmahjongg/zmahjongg-1.01.tgz)
ZSOLITAIRE
http://only.mawhrin.net/~geometer/zaurus/z...itaire-1.02.tgz (http://only.mawhrin.net/~geometer/zaurus/zsolitaire/zsolitaire-1.02.tgz)
TIA
-
ant: I will not because:
1. They are NOT in OpenEmbedded.
2. They are NOT maintained
3. They are hardcoded too much get them built (tried in past).
And they are for Qtopia so only for OPIE not GPE it be possible..
-
Updated:
- gpe-conf
- gpe-login
- ipaq-sleep
- zaurusd
- sylpheed
all into same versions but with dependencies fixed (sylpheed without openssl but with gnutls) or extra patches
-
Updated:
- gpe-conf
- gpe-login
- ipaq-sleep
- zaurusd
- sylpheed
all into same versions but with dependencies fixed (sylpheed without openssl but with gnutls) or extra patches
[div align=\"right\"][a href=\"index.php?act=findpost&pid=131013\"][{POST_SNAPBACK}][/a][/div]
Hrw, would I be right in that the above gpe-login fixes the repeated loggin in and logging out issue that seem to affect couple of us?
-
ant: I will not because:
1. They are NOT in OpenEmbedded.
2. They are NOT maintained
3. They are hardcoded too much get them built (tried in past).
And they are for Qtopia so only for OPIE not GPE it be possible..
[div align=\"right\"][a href=\"index.php?act=findpost&pid=131005\"][{POST_SNAPBACK}][/a][/div]
Zmahjongg: there are Kmahjongg for KDE and Gmahjongg for Gnome.
One of them?
Forget about Qtopia Solitaire...sorry
-
ant: rule #1 still apply anyway
-
Marcin,
I'm really busy this month, but hope to be able to contribute with some packages.
I never find time to compare Gentoo-portage and bitbake...
There are 4 versions in portage:
http://www.gentoo-portage.com/Search?search=mahjongg (http://www.gentoo-portage.com/Search?search=mahjongg)
Two for KDE , one for plane X11 and one (3D) unfortunately for KDE/QT/opengl.
I'd try with
xmahjongg-3.7 (no dependencies from QT):
Runtime Dependencies
xmahjongg-3.7
||
(
( x11-libs/libSM x11-libs/libX11 )
virtual/x11 )
media-libs/libpng
sys-libs/zlib
-
any chance of getting twin working, i the tdm prog seems to be seg faulting but i have used it before on my z sucsessfully
-
Updated:
- gammu 1.07.00
-
hrw,
Could you add spca5xx for the c7x0 please?
Thanks,
Simon
Edit: Looks like the source may have moved, I'll take a look at this.
-
Lardman,
spca source is at http://mxhaard.free.fr/spca50x/Download/sp...20060501.tar.gz (http://mxhaard.free.fr/spca50x/Download/spca5xx-20060501.tar.gz)
There is also a notice about an upcoming change in the spca project here (http://mxhaard.free.fr/download.html) and here (http://lists.zerezo.com/spca50x-devs/msg00644.html)
I have recently been looking at getting a small webcam for my Z. I hoped to have all the necessary bits in place for vacation next week, so even with the spca changes coming soon I would be greatful to be able to use it in the meantime.
-
Hrw,
You mentioned in a previous thread that Zydas zd1211 (USB Wireless-G) is in OE. Could you please add it to an appropriate feed (spitz or upgrades?)
Thank you!
-
Lurker,
I'd already submitted a bug and patches for it, but thanks,
Si
-
Hi hrw,
Could you add links-x11? Current version of links in the feeds won't run in graphics mode on gpe because it's compiled for the fb driver. Afaik XorA added it to oe.
thanks,
hQuin
-
can we get the usb-audio module compiled with the kernel and included in the extra modules pack
-
Hrw, could you please add tinymail to the OZ/GPE package list? I'm still hunting for the holy grail - a fast light graphical MUA with IMAP/SSL and GPG support.
-
Added/upgraded:
- mc 4.6.1
- samba-essential 3.0.20 (minimal Samba server)
- fluxbox 1.0rc
- fbreader 0.7.3d
- icecast 2.2.0
- debianutils 2.16.1
- sword 1.5.8
- nano 1.3.12
- wireless-tools 29pre10 (will be needed for 2.6.17+ kernels)
- dosbox 0.65 (Thx goes to raduga)
- jamvm 1.4.2
- classpath 0.20
- mplayer 1.0pre8
- zip 2.32
- groff 1.19.2 (should fix problems with man pages)
- links-x11 2.1pre22
About other stuff which was requested in last weeks - I will look at it but rather not before end on July - going to vacations.
-
tinymail will not be included as it needs newer dbus that OZ 3.5.4x use and upgrading dbus will require many rebuilds.
usb-audio is enabled in 3.5.4.1 kernel - we do not add anything other without reason. Spending lot of time on building kernel modules is not something which we like to do often.
-
Thanks for that, i am aware of how tricky kerenl modules can be (when they dont compile and crash the build process)
-
Fixed:
- mplayer 1.0pre8 - now installable under opie - close #1147
-
Updated:
- corsair 0.2.5
Added:
- python-pyephem 3.7b
-
UPDATE: Booted GPE on c7x0, installed XMMS from feed. It complain about lack of gtkstylus.so but run.
[div align=\"right\"][{POST_SNAPBACK}][/a][/div] (http://index.php?act=findpost&pid=129708\")
Hrw:
I too would like to use xmms in OZ/GPE however I see it is only in the Opie feed . I enabled the Opie feed and installed it but wasn't successful as you were last month (see bug [a href=\"http://bugs.openembedded.org/show_bug.cgi?id=1164]http://bugs.openembedded.org/show_bug.cgi?id=1164[/url] ). What's the reason it's in the Opie feed & not in base if it will suposedly work in both?
Thanks,
Jerry
**EDIT**
OK, after some digging around I found the x11 version of xmms in the 3.5.4/upgrade feed. It looks like some of the upgrades Hrw is doing are placed in there. My mistake was to assume that 3.5.4.X upgrades would be placed in the 3.5.4.1 feeds. Putting that feed in my ipkg.conf resulted in several other apps being upgraded too
-
I know you hate fiddleing withthe kernel however fbsplash (http://gentoo-wiki.com/HOWTO_fbsplash) could be nice for having a bitmap on each VT in the background.
im not sure what you use for your current splash stuff if it is this or somthing diffrent but if it isnt this then it may come in handy
-
I hope this request qualifies in this upgrades thread.
I would like an already upgraded program (cups) upgraded one more step. The current edition in the upgrades feed is cups_1.1.23-r0 but in the "Angstrom" section there is a cups_1.1.23-r1 (but this won't run on my OZ 3.5.4.1 because of older libraries).
I can't get the r0 edition to work with the internet configuration (localhost:631) and I don't think it is something I am doing wrong. If you could upgrade the package to r1, I believe Koen said it had the internet configuration protocol (localhost:631).
If it is just something I am doing wrong with r0 please let me know.
-
Could you please add Irssi 0.8.10 from the .dev branch? I have built it and it works.
Thanks
-
Ok i know you hate adding things to the kernel but i tried to mount a dvd form my z and had a couple of complaints about the udf file system
also is mplayer updated with the iwmmxt patches? and would it be posible to compile it with libdvdread support
i should really get OE up and running
-
also is mplayer updated with the iwmmxt patches?
[div align=\"right\"][a href=\"index.php?act=findpost&pid=136291\"][{POST_SNAPBACK}][/a][/div]
Yes, but that doesn't work with softfpa, since the instructions overlap. It does work with EABI
-
Mrxvt 0.5.1 please,
Thanks,
Jerry
-
i would be nice to have bluefish, i think it is in oe... sorry if it doesn't,
I use bluefish a lot on my desktop.
-
Fixed:
- wpa-supplicant
-
Added:
- cherokee 0.5.3
- ruby 1.8.2
Upgraded:
- gpe-conf 0.2.0
- gpe-timesheet 0.31
- libgpewidget 0.114
-
Updated:
- cups
- wpa-gui
- qemu
Added:
- emacs (non-X11)
-
Updated:
- cups
[div align=\"right\"][a href=\"index.php?act=findpost&pid=137686\"][{POST_SNAPBACK}][/a][/div]
yay for a working webgui!
-
is there a SDL with a FB target, the only one i see in the feeds is for X11
-
is there a SDL with a FB target, the only one i see in the feeds is for X11
[div align=\"right\"][a href=\"index.php?act=findpost&pid=137761\"][{POST_SNAPBACK}][/a][/div]
The 'x11' version is a regular x11, it's only called 'x11' because it links to xlibs, and to distinguish it from that evil qte hack.
-
if you are impling that it will run under any X11 enviroment then i still have a problem (i dont run a window manager) hence the need for a FB target
-
if you are impling that it will run under any X11 enviroment then i still have a problem (i dont run a window manager) hence the need for a FB target
[div align=\"right\"][a href=\"index.php?act=findpost&pid=137888\"][{POST_SNAPBACK}][/a][/div]
It should behave like a normal sdl and fall back to framebuffer if no X is present. If it doesn't, it's a bug.
-
updated:
- gpe-conf 0.2.1 (fixed crash on date&time)
-
Couple of requests for inclusion into OZ please
pymp
http://jdolan.dyndns.org/jaydolan/pymp.html (http://jdolan.dyndns.org/jaydolan/pymp.html)
The only way I have been able to play oggs under OZ is with mplayer so now I need a GUI to manage mplayer playlists with and this was the best GTK one I could find.
dillo 0.8.6
Yes yes, its a GTK 1.x app I know but if we're going to have xmms in the feed then we should definately have dillo too as it is the best open source, light-weight GTK browser out there. When gpe-minibrowser is good enough to handle Yahoo! mail then we can ditch this I suppose.
Thanks!
dan
-
Couple of requests for inclusion into OZ please
pymp
http://jdolan.dyndns.org/jaydolan/pymp.html (http://jdolan.dyndns.org/jaydolan/pymp.html)
The only way I have been able to play oggs under OZ is with mplayer so now I need a GUI to manage mplayer playlists with and this was the best GTK one I could find.
dillo 0.8.6
Yes yes, its a GTK 1.x app I know but if we're going to have xmms in the feed then we should definately have dillo too as it is the best open source, light-weight GTK browser out there. When gpe-minibrowser is good enough to handle Yahoo! mail then we can ditch this I suppose.
Thanks!
dan
[div align=\"right\"][a href=\"index.php?act=findpost&pid=138408\"][{POST_SNAPBACK}][/a][/div]
Try reading the first post: Only request software that already is on OE.
-
Couple of requests for inclusion into OZ please
pymp
http://jdolan.dyndns.org/jaydolan/pymp.html (http://jdolan.dyndns.org/jaydolan/pymp.html)
The only way I have been able to play oggs under OZ is with mplayer so now I need a GUI to manage mplayer playlists with and this was the best GTK one I could find.
dillo 0.8.6
Yes yes, its a GTK 1.x app I know but if we're going to have xmms in the feed then we should definately have dillo too as it is the best open source, light-weight GTK browser out there. When gpe-minibrowser is good enough to handle Yahoo! mail then we can ditch this I suppose.
Thanks!
cann't you get the
dan
[div align=\"right\"][a href=\"index.php?act=findpost&pid=138408\"][{POST_SNAPBACK}][/a][/div]
Try reading the first post: Only request software that already is on OE.
[div align=\"right\"][a href=\"index.php?act=findpost&pid=138415\"][{POST_SNAPBACK}][/a][/div]
pymp just needs python, I thought. did you try install python then running pymp ?
-
Hmm, I can't see a python package in the OZ feeds, but there is one called python-pyethem ? Won't I also need the pygtk libs?
xmms for OZ has apparently been fixed so we should have a music player under OZ soon!
Have you got pymp to run under OZ adf?
-
Hmm, I can't see a python package in the OZ feeds
Add this feed:
http://ewi546.ewi.utwente.nl/mirror/www.op....1/feed/python/ (http://ewi546.ewi.utwente.nl/mirror/www.openzaurus.org/official/unstable/3.5.4.1/feed/python/)
@Hrw
Sorry we littered your upgrades thread.
-
Updated:
- xmms
- gpe-conf (should not segfault now)
- mikmod
- python-pysqlite2 (depend on python-datetime now)
Added:
- xmms-mad (MP3 playback)
- xmms-tremor (OGG playback)
- fakeroot
- sbrsh (for scratchbox users)
- gpe-theme-e17 (unify look of E17 and GPE apps)
- aspell-en
- aspell-pl
-
Added:
- slcalc 1.2.1
Updated:
- DejaVu font to 2.9 (ttf and qpf versions)
-
I just installed a virgin OZ/GPE on my collie 5500.
ipkg upgrade gives me
Collected errors:
ERROR: Cannot satisfy the following dependencies for gpe-conf:
libgpewidget1 (>= 0.114)there is also
gtk+: unsatisfied recommendation for gdk-pixbuf-loader-jpgi think the dep should be gdk-pixbuf-loader-jpeg
gammu misses its latest lib
Collected errors:
ERROR: Cannot satisfy the following dependencies for gammu:
libgammu0 (>= 1.07.00)other than that, everything seems to work
-
...
other than that, everything seems to work
...
Ah, shouldn't have wrote that early...
my wireless lan card (netgear ma701) which i used to do the update doesn't work anymore.
Going back to hostap modules 0.3.9 solves that.
Whatever... gaim and mini-browser tonight, the rest tomorrow
-
Can I get Mplayer bumped and compiled without executuable stack support? 1.0pre8 supports that.
-
Hiddenface: thx for info - I will fix it.
Added:
- libgpewidget 0.114
- gammu 1.07.00
gtk+ also fixed
-
Can I get Mplayer bumped and compiled without executuable stack support? 1.0pre8 supports that.
[div align=\"right\"][a href=\"index.php?act=findpost&pid=139614\"][{POST_SNAPBACK}][/a][/div]
Im not quite sure what you mean. Patches welcome.
-
Im not quite sure what you mean. Patches welcome.
[div align=\"right\"][a href=\"index.php?act=findpost&pid=139648\"][{POST_SNAPBACK}][/a][/div]
My SL5500 using the OZ/Opie stable (Not 3.5.4.2.rcX) has Mplayer on SD, plus the libs for it. However, every time I run mplayer I get a responce:
root@collie:~# mplayer
mplayer: error while loading shared libraries: libmad.so.0: cannot enable executable stack as shared object requires: Error 14
root@collie:~#
However, since this is mplayer 1.0pre8, and there's support for not using the exec stacks, all you need to do is pass a switch to ./configure. It's already patched.
-
Added:
- zsafe 2.1.3
- fbvncserver-module for Tosa/3.5.4
- ethereal 0.99
Updated:
- binutils 2.16 now native development should work
-
Can I request VIM 7.0 to be recompiled with VIM keymap support included? To someone who uses VIM a lot, this is the only sensible option for editing texts in foreign languages (like Russian in my case), as it solves the problem of having to constantly switch back to English keyboard layout to enter VIM commands to manipulate the text.
-
Hi,
Please add qmake to the repository.
Thanx,
YoG.
-
Updated:
- vim 7.0 with features=big
- opie-multikey with Italian and Hebrew keymap
- gpe-package
about qmake: we do not have it yet - I will pester Mickeyl for it.
-
Hrw can you add "qiv" ?
"Quick Image Viewer v2.0 (22.05.2004)
for Linux, Solaris(SunOS), FreeBSD and HP-UX
... is a very small and pretty fast gdk/Imlib image viewer."
http://www.klografx.net/qiv/index2.html (http://www.klografx.net/qiv/index2.html)
Thnx,
Tasos
-
Added:
- imlib 1.9.15
- qiv 1.9
- tcsh 6.14.00 (not ideal package but should help Koen with his OO.org build)
-
hrw, thnx for qiv!
What about xchm ( libchm,wxGTK)
http://xchm.sourceforge.net/download.html (http://xchm.sourceforge.net/download.html)
http://66.93.236.84/%7Ejedwin/projects/chmlib/ (http://66.93.236.84/%7Ejedwin/projects/chmlib/)
http://www.wxwidgets.org/ (http://www.wxwidgets.org/)
Tasos
-
I will probably stop OZ/OE work for some time - have to fix my home machine and this need two things: time and money.
Memtest86 passed so it is not memory, badblocks and S.M.A.R.T. tests passed so it is not hdd. CPU (AthlonXP 1.8GHz) has 45-60°C so it is not this. I have to find replacement PSU for this PC and test does it help. If this will not help then I will be out of ideas.
Until I resolve those problems I will not work on OZ as I do not like to have to use c760 as SSH terminal.
-
Updated:
- libmpeg2 (now does not depend on X11 libs)
- scummvm (depend on proper libmpeg2 packages)
- libsndfile
Added:
- rox-filer 2.5
-
Updated:
- vim 7.0 with features=big
- opie-multikey with Italian and Hebrew keymap
- gpe-package
about qmake: we do not have it yet - I will pester Mickeyl for it.
[div align=\"right\"][a href=\"index.php?act=findpost&pid=140441\"][{POST_SNAPBACK}][/a][/div]
please please please come up with qmake !!!!
in the meanwhile, can you let me know which sources it comes from and I will try to at least build it on
my zaurus
-
From the .bb files, it's probably in:
ftp://ftp.trolltech.com/pub/qt/source/qt-...e-3.3.5.tar.bz2 (http://ftp://ftp.trolltech.com/pub/qt/source/qt-embedded-free-3.3.5.tar.bz2)
+ a conf file from the OE metadata under the qmake directory.
See here: http://www.openembedded.org/repo/org.opene...native_1.07a.bb (http://www.openembedded.org/repo/org.openembedded.dev/packages/qmake/qmake-native_1.07a.bb)
Si
-
From the .bb files, it's probably in:
ftp://ftp.trolltech.com/pub/qt/source/qt-...e-3.3.5.tar.bz2 (http://ftp://ftp.trolltech.com/pub/qt/source/qt-embedded-free-3.3.5.tar.bz2)
+ a conf file from the OE metadata under the qmake directory.
See here: http://www.openembedded.org/repo/org.opene...native_1.07a.bb (http://www.openembedded.org/repo/org.openembedded.dev/packages/qmake/qmake-native_1.07a.bb)
Si
[div align=\"right\"][a href=\"index.php?act=findpost&pid=140826\"][{POST_SNAPBACK}][/a][/div]
if you want to build it natively, then the first thing it does is build qmake, followed by moc and then the qt-mt shared or static library. if you then further compile the tools, it will first compile uic and the rest of the tools. you probbaly want to compile designer, linguistics and assistant.
-
Hrw, Thanks for your great work. Can you also add the following to the feed:
fbvncserver-kmodule for tosa?
Thanks again!!
-
http://ewi546.ewi.utwente.nl/tmp/hrw/fb/?a...k7-pxa3-embedix (http://ewi546.ewi.utwente.nl/tmp/hrw/fb/?action=details&pnm=fbvncserver-kmodule-2.4.18-rmk7-pxa3-embedix) show that it is already provided for Tosa.
-
Updated:
- scummvm 0.9.0
- kismet 2006-04-R1
Added:
- xournal 0.3.1
- task-native-sdk - should be enough to build something
-
Please build spca5xx for C3000.
Thanks!
-
can you update the firefox package, please?
see here:
https://www.oesf.org/forums/index.php?showtopic=21570 (https://www.oesf.org/forums/index.php?showtopic=21570)
and here:
http://bugs.openembedded.org/show_bug.cgi?id=1436 (http://bugs.openembedded.org/show_bug.cgi?id=1436)
thanks for solving this!
-
Updated:
- scummvm 0.9.0
- kismet 2006-04-R1
hrw,
the kismet package from the upgrades feed is broken. won't start because the binaries are linked to libuclibc++0 _and_ libstdc++6.
here's what happens:
root@zoe:~# ./kismet_server
*** glibc detected *** ./kismet_server: double free or corruption (!prev): 0x000c2968 ***
======= Backtrace: =========
/lib/libc.so.6[0x40245f18]
./kismet_server[0x8cea4]
/lib/libc.so.6(__libc_start_main+0xbc)[0x401fbc10]
======= Memory map: ========
00008000-000ae000 r-xp 00000000 1f:03 13608 /home/root/kismet_server
000b6000-000b8000 rw-p 000a6000 1f:03 13608 /home/root/kismet_server
000b8000-000e3000 rwxp 000b8000 00:00 0 [heap]
40000000-40019000 r-xp 00000000 1f:02 712 /lib/ld-2.3.90.so
4001d000-4001f000 rw-p 4001d000 00:00 0
40020000-40022000 rw-p 00018000 1f:02 712 /lib/ld-2.3.90.so
40022000-4003b000 r-xp 00000000 1f:02 28870 /usr/lib/libuClibc++.so.0.1.9
4003b000-40042000 ---p 00019000 1f:02 28870 /usr/lib/libuClibc++.so.0.1.9
40042000-40044000 rw-p 00018000 1f:02 28870 /usr/lib/libuClibc++.so.0.1.9
40044000-40048000 rw-p 40044000 00:00 0
40048000-40114000 r-xp 00000000 1f:02 6572 /usr/lib/libstdc++.so.6.0.3
40114000-4011b000 ---p 000cc000 1f:02 6572 /usr/lib/libstdc++.so.6.0.3
4011b000-40121000 rw-p 000cb000 1f:02 6572 /usr/lib/libstdc++.so.6.0.3
40121000-40127000 rw-p 40121000 00:00 0
40127000-401cb000 r-xp 00000000 1f:02 725 /lib/libm-2.3.90.so
401cb000-401d2000 ---p 000a4000 1f:02 725 /lib/libm-2.3.90.so
401d2000-401d4000 rw-p 000a3000 1f:02 725 /lib/libm-2.3.90.so
401d4000-401dd000 r-xp 00000000 1f:02 724 /lib/libgcc_s.so.1
401dd000-401e4000 ---p 00009000 1f:02 724 /lib/libgcc_s.so.1
401e4000-401e5000 rw-p 00008000 1f:02 724 /lib/libgcc_s.so.1
401e5000-402e8000 r-xp 00000000 1f:02 718 /lib/libc-2.3.90.so
402e8000-402ef000 ---p 00103000 1f:02 718 /lib/libc-2.3.90.so
402ef000-402f0000 r--p 00102000 1f:02 718 /lib/libc-2.3.90.so
402f0000-402f4000 rw-p 00103000 1f:02 718 /lib/libc-2.3.90.so
402f4000-402f6000 rw-p 402f4000 00:00 0
bec47000-bec5c000 rwxp bec47000 00:00 0 [stack]
Aborted
i re-built the kismet package myself using the org.openembedded.oz354x branch (but had to add a dependency to ncurses to get it built...) and it works perfectly (since not being linked to two c++ libs).
so could you just rebuild the package, so that other users don't end up with a broken kismet package?
thanks...
-
Rebuilt:
- kismet (thx for info)
Updated:
- keymap for tosa (close #1500 and part of #1498)
-
Could you please update
libgsf to 1.14.2 as this fixes a bug in importing incorrectly formatted excel files (as produced by Psiwin) into Gnumeric
Thanks!
-
Updated:
- vim 7.0 with features=big
- opie-multikey with Italian and Hebrew keymap
- gpe-package
about qmake: we do not have it yet - I will pester Mickeyl for it.
[div align=\"right\"][a href=\"index.php?act=findpost&pid=140441\"][{POST_SNAPBACK}][/a][/div]
Has Mickeyl had any time to do qmake yet?
Cheers
-
Chris,
The latest update to SDL - what is it supposed to fix? Can you detail a bit about it or post a link about the change?
Any work on that is VERY appreciated... many things that I enjoy depend on SDL...
-
Still wondering about recompiling MPlayer to work on 2.4 kernel Collie in 3.5.4.
-
Still wondering about recompiling MPlayer to work on 2.4 kernel Collie in 3.5.4.
[div align=\"right\"][a href=\"index.php?act=findpost&pid=145065\"][{POST_SNAPBACK}][/a][/div]
A simple recompile doesn't do the trick as fresh images also show the libmad problem.
-
A request:
Can qpe-gaim be upgraded?
Thanx,
YoG
-
Can we get TightVNC for the GPE images? Just the viewer.
-
opie-tabmanager? I always found that a pretty convenient utility.
Albert
-
Okay, just an update to earlier requests:
* TightVNC on the GPE images
* Firefox upgraded to 2.0.0.1
I can try to compile it on my Akita if need be.
-
I'd like to see a newer version of ettercap
would it be possible to get a busybox with httpd enabled to go with the php in the feed?
-
Could Gnomesword be upgraded?
Thanks
-
JohnKiniston,
in order to have a http+php setup, just install 'cherokee' and 'php' packages.