OESF Portables Forum

Everything Else => Zaurus - Everything Development => Distros, Development, and Model Specific Forums => Archived Forums => Python => Topic started by: zedkatuf2 on May 22, 2006, 02:12:33 pm

Title: Porting Pyfits To Oz 3.54
Post by: zedkatuf2 on May 22, 2006, 02:12:33 pm
Hi

I'm wondering how to go about converting pyfits so it will work with an ARM processor; I have a Collie with OZ 3.5.4.1 (Hentges) installed & the latest version of python for OZ.

Pyfits can be found here:

http://www.stsci.edu/resources/software_ha...pyfits/Download (http://www.stsci.edu/resources/software_hardware/pyfits/Download)

Could anyone point me in the right direction as to how to go about this process?

Or, perhaps someone would be willing to do it?

Thanks!
Title: Porting Pyfits To Oz 3.54
Post by: koen on May 22, 2006, 03:18:35 pm
Quote
Hi

I'm wondering how to go about converting pyfits so it will work with an ARM processor; I have a Collie with OZ 3.5.4.1 (Hentges) installed & the latest version of python for OZ.

Pyfits can be found here:

http://www.stsci.edu/resources/software_ha...pyfits/Download (http://www.stsci.edu/resources/software_hardware/pyfits/Download)

Could anyone point me in the right direction as to how to go about this process?

[div align=\"right\"][a href=\"index.php?act=findpost&pid=128090\"][{POST_SNAPBACK}][/a][/div]

Install OE and write a .bb file for it. I suspect it wouldn't be too hard if you do 'inherit distutils' inside the .bb
Title: Porting Pyfits To Oz 3.54
Post by: Mickeyl on May 23, 2006, 04:27:28 am
Did I hear anything Python?

Ok.

I have just added python-pyfits and python-pyraf to .dev.

If you ask hrw in the upgrade thread nicely, he may compile it for the upgrades feed.
Title: Porting Pyfits To Oz 3.54
Post by: Hrw on May 23, 2006, 10:17:48 am
added both into 3.5.4x upgrades
Title: Porting Pyfits To Oz 3.54
Post by: zedkatuf2 on July 11, 2006, 04:41:44 pm
Quote
added both into 3.5.4x upgrades
[div align=\"right\"][{POST_SNAPBACK}][/a][/div] (http://index.php?act=findpost&pid=128188\")

MANY thanks hrw - & apologies for responding sooo long after my initial request; I've just been too busy at work to give it a look  

I've dnloaded pyfits & ptkinter too & will try as soon as I get a moment.

I don't suppose you could knock up pyephem too, (please!):

[a href=\"http://www.rhodesmill.org/brandon/projects/pyephem.html]http://www.rhodesmill.org/brandon/projects/pyephem.html[/url]

?

I'm just RTFM'ing how to set up a development environemnt so I can start rolling my own ipks, but not sure if I'll succeed in digging out the time needed to do it.

Thanks again,

zedkatuf.
Title: Porting Pyfits To Oz 3.54
Post by: Mickeyl on July 11, 2006, 06:20:02 pm
At your service  Added python-pyephem into OE.
Title: Porting Pyfits To Oz 3.54
Post by: zedkatuf2 on July 12, 2006, 02:07:22 am
Quote
At your service  Added python-pyephem into OE.
[div align=\"right\"][a href=\"index.php?act=findpost&pid=134754\"][{POST_SNAPBACK}][/a][/div]

Many thanks Mickeyl; let me know when it's 'cooked' & I'll try it out

Cheers,

zedkatuf.
Title: Porting Pyfits To Oz 3.54
Post by: Hrw on July 12, 2006, 03:15:28 am
added into 3.5.4.1 upgrades, building for 3.5.4
Title: Porting Pyfits To Oz 3.54
Post by: zedkatuf2 on July 12, 2006, 04:45:36 am
Quote
added into 3.5.4.1 upgrades, building for 3.5.4
[div align=\"right\"][a href=\"index.php?act=findpost&pid=134796\"][{POST_SNAPBACK}][/a][/div]

  Tnx hrw.  I'll have to get into this building-for-OZ-stuff myself sometime!

Cheers,

zedkatuf
Title: Porting Pyfits To Oz 3.54
Post by: Hrw on July 12, 2006, 05:53:19 am
added into 3.5.4 upgrades too