OESF Portables Forum

Everything Else => Zaurus Distro Support and Discussion => Distros, Development, and Model Specific Forums => Archived Forums => Angstrom & OpenZaurus => Topic started by: pcombe01_SL5500 on July 01, 2006, 11:49:39 am

Title: Installed Oz To Sl5500 Now Will Not Save
Post by: pcombe01_SL5500 on July 01, 2006, 11:49:39 am
I have installed Open Zaurus to an SL 5500. Now I show the following.

Total Memory 62412 kB

Used 10124 kB

Buffers kB

Cached 12256 kB

Free 40004 kB

Internal Storage /dev/root

Used 14352 kB Available 112 kB

SD Card

Used 12368 kB Available 226822

Inspite of showing free memory when I try to save data to the device it says no memory left. I have tried creating a local user account but it will not write to /home.

Can someone please describe the procedure for moving /home to the SD card?

Hope this is not to basic a question. Thanks in advance for any suggestions.

PMC
Title: Installed Oz To Sl5500 Now Will Not Save
Post by: chrisl on July 02, 2006, 02:04:21 pm
Quote
I have installed Open Zaurus to an SL 5500. Now I show the following.

Total Memory 62412 kB

Used 10124 kB

Buffers kB

Cached 12256 kB

Free 40004 kB

Internal Storage /dev/root

Used 14352 kB Available 112 kB

SD Card

Used 12368 kB Available 226822

Inspite of showing free memory when I try to save data to the device it says no memory left. I have tried creating a local user account but it will not write to /home.

Can someone please describe the procedure for moving /home to the SD card?

Hope this is not to basic a question. Thanks in advance for any suggestions.

PMC
[div align=\"right\"][a href=\"index.php?act=findpost&pid=133604\"][{POST_SNAPBACK}][/a][/div]

Use the Hentges ROMS and the cfs. It prompts you if you want root on the sd card. I did have a similar problem, even with the Hentges ROM (http://hentges.net/index.html). The problem turned out to be my sd card. After replacing my card all went well.

Chris--
Title: Installed Oz To Sl5500 Now Will Not Save
Post by: miskinis on July 03, 2006, 02:35:13 am
FYI  - Be careful, the cross-posting-police can be nasty!    
Title: Installed Oz To Sl5500 Now Will Not Save
Post by: Hrw on July 03, 2006, 04:06:26 am
miskinis: Hentges 'ROM' is also OpenZaurus - just changed in some places.
Title: Installed Oz To Sl5500 Now Will Not Save
Post by: miskinis on July 03, 2006, 04:50:43 am
Quote
miskinis: Hentges 'ROM' is also OpenZaurus - just changed in some places.
[div align=\"right\"][{POST_SNAPBACK}][/a][/div] (http://index.php?act=findpost&pid=133723\")

Hi, I was referring to:

[a href=\"https://www.oesf.org/forums/index.php?showtopic=20251]https://www.oesf.org/forums/index.php?showtopic=20251[/url]

I might be partially to blame, as I pointed the user to the OZ forums, in order
to "find" additional information/posts...  

Perhaps an AI-based post watcher/mover/notifier would be useful for situations
like this.
Title: Installed Oz To Sl5500 Now Will Not Save
Post by: lardman on July 03, 2006, 07:44:47 am
Quote
Internal Storage /dev/root

Used 14352 kB Available 112 kB

SD Card

Used 12368 kB Available 226822

Assuming you tried to save on /, you don't have much space - only 112kb in fact, and this is not enough for the jffs2 filesystem to work its magic.


Si
Title: Installed Oz To Sl5500 Now Will Not Save
Post by: pcombe01_SL5500 on July 05, 2006, 10:16:57 pm
Thanks for the advice. Would rather check the appropriate forum to see if someone has solved a similar problem without a ROM switch. Any advice on where I should go next?

The Forum Wanderer

Quote
Quote
miskinis: Hentges 'ROM' is also OpenZaurus - just changed in some places.
[div align=\"right\"][{POST_SNAPBACK}][/a][/div] (http://index.php?act=findpost&pid=133723\")

Hi, I was referring to:

[a href=\"https://www.oesf.org/forums/index.php?showtopic=20251]https://www.oesf.org/forums/index.php?showtopic=20251[/url]

I might be partially to blame, as I pointed the user to the OZ forums, in order
to "find" additional information/posts...  

Perhaps an AI-based post watcher/mover/notifier would be useful for situations
like this.
[div align=\"right\"][a href=\"index.php?act=findpost&pid=133728\"][{POST_SNAPBACK}][/a][/div]
Title: Installed Oz To Sl5500 Now Will Not Save
Post by: pcombe01_SL5500 on October 01, 2006, 08:25:13 pm
Sending out a thank you to everyone who helped me with my problem. After a few false starts I have installed hentges rom and cfs and everything is working the way I want it to.


Quote
Quote
I have installed Open Zaurus to an SL 5500. Now I show the following.

Total Memory 62412 kB

Used 10124 kB

Buffers kB

Cached 12256 kB

Free 40004 kB

Internal Storage /dev/root

Used 14352 kB Available 112 kB

SD Card

Used 12368 kB Available 226822

Inspite of showing free memory when I try to save data to the device it says no memory left. I have tried creating a local user account but it will not write to /home.

Can someone please describe the procedure for moving /home to the SD card?

Hope this is not to basic a question. Thanks in advance for any suggestions.

PMC
[div align=\"right\"][a href=\"index.php?act=findpost&pid=133604\"][{POST_SNAPBACK}][/a][/div]

Use the Hentges ROMS and the cfs. It prompts you if you want root on the sd card. I did have a similar problem, even with the Hentges ROM (http://hentges.net/index.html). The problem turned out to be my sd card. After replacing my card all went well.

Chris--
[div align=\"right\"][a href=\"index.php?act=findpost&pid=133671\"][{POST_SNAPBACK}][/a][/div]
Title: Installed Oz To Sl5500 Now Will Not Save
Post by: mimeca on October 08, 2006, 07:27:42 am
Root system must have free space (112 KB is a very low space). The easier solution is install the system on SD (you have some scripts on the latest release of OZ).