OESF Portables Forum

Everything Else => Zaurus Distro Support and Discussion => Distros, Development, and Model Specific Forums => Archived Forums => Sharp ROMs => Topic started by: wrc4 on July 16, 2006, 03:53:30 am

Title: Usb Bluetooh Dongle With Cacko 1.23
Post by: wrc4 on July 16, 2006, 03:53:30 am

I am trying to use my Bluetooth 2.0 USB dongle (CSR BlueCore4 chip) with my C1000. The dongle can be recognized and the Bluetooth service is up.

So I ran:
    hcitool scan
and my Nokia N70 was discovered. I was able to use 'sdptool browse' to see the services of my N70.

Then I ran
   hcitool cc <bdaddr of my N70>
The phone was shown as connected for about 10 second and then it disconnected silently. But I think it should stay connected until I run 'hcitool dc'. So what could be wrong with this step?

BTW, I modified the /etc/bluetooth/rfcomm.conf file to add the following lines (it was empty originally):

rfcomm0 {
        # Automatically bind the device at startup
        bind yes;
      
        # Bluetooth address of the device
        device <bdaddr of my N70>;
      
        # RFCOMM channel for the connection
        channel 10; # OBEX File Transfer of N70
      
        # Description of the connection
        comment "N70";
}

Also, when I browse the services from a desktop (also using a BT dongle), the only service I can find on my Zaurus is the OBEX service. But I think I have added all the services with:

sdptool add DID SP DUN LAN FAX OPUSH FTP HS HF SAP NAP GN PANU HID CIP CTP A2SRC A2SNK SYNCML NOKID PCSUITE SR1

Can anyone give me some hints?

Title: Usb Bluetooh Dongle With Cacko 1.23
Post by: bolbit on July 26, 2006, 06:47:07 pm

Hi, not sure it will work but you may be need to "unpair" your Z and your phone : delete the Z from the known BT terminal in your phone.
The connection between my Z and my Siemens S55 works only if the Z is not in the known bluetooth list of the phone.
I have a C1000 and use the BT connection with a USB dongle and a CF card, same thing for the both device.

Title: Usb Bluetooh Dongle With Cacko 1.23
Post by: wrc4 on July 29, 2006, 12:20:44 pm

Quote

Hi, not sure it will work but you may be need to "unpair" your Z and your phone : delete the Z from the known BT terminal in your phone.
The connection between my Z and my Siemens S55 works only if the Z is not in the known bluetooth list of the phone.
I have a C1000 and use the BT connection with a USB dongle and a CF card, same thing for the both device.
[div align=\"right\"][a href=\"index.php?act=findpost&pid=136542\"][{POST_SNAPBACK}][/a][/div]

Thanks.

I actually can use BT DUN and BT PAN provided with Cacko Network Bluetooth applets. But I would like to use something like Gammu or Gnokii so I need to connect to other services.

When I use other channels the connection just work several second and then disconnected automatically. I'm trying this on desktop Linux to see if the behavior is the same.