OESF Portables Forum

Everything Else => Zaurus Distro Support and Discussion => Distros, Development, and Model Specific Forums => Archived Forums => Angstrom & OpenZaurus => Topic started by: kellyharding on October 05, 2006, 10:03:55 pm

Title: Wifi Problems On Oz 3.5.4.1
Post by: kellyharding on October 05, 2006, 10:03:55 pm

Hi,

I've just put OpenZaurus 3.5.4.1/Opie on my SL-C860.

It seems my wifi card won't work at all.

I get the following error output in dmesg:

Code: [Select]

pccard: card ejected from slot 0
pccard: PCMCIA card inserted into slot 0
pcmcia: registering new device pcmcia0.0
orinoco 0.15rc3 (David Gibson , Pavel Roskin , et al)
spectrum_cs 0.15rc3 (Pavel Roskin , David Gibson , et al)
eth0: Hardware identity 8000:0001:0000:0000
eth0: Station identity  0021:0002:0002:0001
eth0: Firmware determined as Symbol F3.91-71
eth0: Ad-hoc demo mode supported
eth0: IEEE standard IBSS ad-hoc mode supported
eth0: WEP supported, 104-bit key
eth0: MAC address 00:A0:F8:A1:73:73
eth0: Station name "Prism  I"
eth0: ready
eth0: index 0x01: Vcc 3.3, irq 40, io 0xc4820000-0xc4820047
hermes @ c4820000: Truncating LTV record from 8 to 6 bytes. (rid=0xfd43, len=0x0005)
ADDRCONF(NETDEV_UP): eth0: link is not ready
pccard: card ejected from slot 0
pccard: PCMCIA card inserted into slot 0
pcmcia: registering new device pcmcia0.0
eth0: Hardware identity 8000:0001:0000:0000
eth0: Station identity  0021:0002:0002:0001
eth0: Firmware determined as Symbol F3.91-71
eth0: Ad-hoc demo mode supported
eth0: IEEE standard IBSS ad-hoc mode supported
eth0: WEP supported, 104-bit key
eth0: MAC address 00:A0:F8:A1:73:73
eth0: Station name "Prism  I"
eth0: ready
eth0: index 0x01: Vcc 3.3, irq 40, io 0xc4820000-0xc4820047
hermes @ c4820000: Truncating LTV record from 8 to 6 bytes. (rid=0xfd43, len=0x0005)
ADDRCONF(NETDEV_UP): eth0: link is not ready
hermes @ c4820000: Truncating LTV record from 8 to 6 bytes. (rid=0xfd43, len=0x0005)
ADDRCONF(NETDEV_UP): eth0: link is not ready
cardctl ident output:

Code: [Select]

Socket 0:
  product info: "Socket", "CF+ LP WLAN Card Rev A", "1.00"
  manfid: 0x0104, 0x0001
  function: 6 (network)
Any ideas?

Card is a Socket LP CF wifi card.

Thanks,

Kelly

Title: Wifi Problems On Oz 3.5.4.1
Post by: kellyharding on October 07, 2006, 11:37:27 am

Bug report filed on OE bugtracker.

Title: Wifi Problems On Oz 3.5.4.1
Post by: Hrw on October 09, 2006, 09:45:16 am

ipkg remove -recursive *orinoco*

reboot

Title: Wifi Problems On Oz 3.5.4.1
Post by: kellyharding on October 09, 2006, 10:43:00 am

Quote

ipkg remove -recursive *orinoco*

reboot
[div align=\"right\"][a href=\"index.php?act=findpost&pid=143517\"][{POST_SNAPBACK}][/a][/div]

Thanks hrw, will restore the NAND backup and give it a try.

Kelly

Title: Wifi Problems On Oz 3.5.4.1
Post by: kellyharding on October 12, 2006, 06:27:31 pm

Quote

ipkg remove -recursive *orinoco*

reboot
[div align=\"right\"][a href=\"index.php?act=findpost&pid=143517\"][{POST_SNAPBACK}][/a][/div]

Tried this just now. Didn;'t solve/work, made things worse it seems.

Don't get any wifi devices in the opie network tool now.

Kelly