OESF Portables Forum
Model Specific Forums => Sharp Zaurus => Zaurus - pdaXrom => Topic started by: Andmann on December 06, 2006, 09:02:47 pm
-
Hi all,
I have reinstalled r121 from scratch and so far I have many things working that I had troubles with before.
I do have some issues that I would like to get fixed, I have looked the site up and down for the answers but no luck.
One thing is I would like to get keyboard mapping corrected.
The zoom, brightness don't work long with some other buttons all of which have been mentioned before.
The other is that the CPU over clocking doesn't stay if you suspend. My time is ok if I suspend that issue I don't have.
The volume is very very low and it's set to max.
The other big issue is that I would like to get my ambicom card ( WPA-PSK )working, right now I use my symbol card.
Thanks for any help in advance.
Andmann
-
Hi,
I had to reinstall r121 because I tried OZ/GPE and a NAND-Backup of R121 is not restoreable. Btw: I found pdaXrom better than OZ/GPE for my needs. Anyway, For future use I wrote a script to do the nessecary fixes to r121 and to install the extra packages I need.
Here is what I wrote in https://www.oesf.org/forums/index.php?showtopic=22119 (https://www.oesf.org/forums/index.php?showtopic=22119)
Here are the Fixes that I had to do:
- wpa_supplicant script: Line 26 of /etc/rc.d/init.d/wpa_supplicant file. There is a double hyphen -- in the middle of the line that calls wpa_supplicant in daemon mode. This causes the wpa_supplicant not to load.
- The default install does not have the [Fn] + [1,2,3,4] hot keys correctly set-up. You need to change the line in /usr/X11R6/bin/startx from ->
defaultserverargs=" -nolisten tcp"
to ->
defaultserverargs=" -nolisten tcp -kb"
For my WPA-PSK-configuration see
https://www.oesf.org/forums/index.php?showtopic=22285 (https://www.oesf.org/forums/index.php?showtopic=22285)
I don't have an ambicom-card, but I saw many posts about that card. Is it somehow special? My D-Link card works well with WPA-PSK.
I changed my keyboard-mapping to support german keys. What exactly do you want to change?
I don't use overclocking so I can't help there, sorry.
Cheers, Jan
-
Hi,
I had to reinstall r121 because I tried OZ/GPE and a NAND-Backup of R121 is not restoreable. Btw: I found pdaXrom better than OZ/GPE for my needs. Anyway, For future use I wrote a script to do the nessecary fixes to r121 and to install the extra packages I need.
Here is what I wrote in https://www.oesf.org/forums/index.php?showtopic=22119 (https://www.oesf.org/forums/index.php?showtopic=22119)
Here are the Fixes that I had to do:
- wpa_supplicant script: Line 26 of /etc/rc.d/init.d/wpa_supplicant file. There is a double hyphen -- in the middle of the line that calls wpa_supplicant in daemon mode. This causes the wpa_supplicant not to load.
- The default install does not have the [Fn] + [1,2,3,4] hot keys correctly set-up. You need to change the line in /usr/X11R6/bin/startx from ->
defaultserverargs=" -nolisten tcp"
to ->
defaultserverargs=" -nolisten tcp -kb"
For my WPA-PSK-configuration see
https://www.oesf.org/forums/index.php?showtopic=22285 (https://www.oesf.org/forums/index.php?showtopic=22285)
I don't have an ambicom-card, but I saw many posts about that card. Is it somehow special? My D-Link card works well with WPA-PSK.
I changed my keyboard-mapping to support german keys. What exactly do you want to change?
I don't use overclocking so I can't help there, sorry.
Cheers, Jan
[div align=\"right\"][a href=\"index.php?act=findpost&pid=148354\"][{POST_SNAPBACK}][/a][/div]
Thanks for your help. I got the keyboard thing fixed. So that's one down.
I am looking for one of the DLink cards so I can get the WPA working.
thanks again.
Andmann