OESF Portables Forum

Everything Else => Sharp Zaurus => Model Specific Forums => Distros, Development, and Model Specific Forums => Archived Forums => C1000/3x00 Hardware => Topic started by: jalismak on December 24, 2006, 10:08:31 am

Title: My Zaurus Not Recognize The Card [fixed]
Post by: jalismak on December 24, 2006, 10:08:31 am: Hi, I´m a new user with zaurus. When i´m purchased it already comes with cacko rom, all goes good but it doesn't recognize my sd or mmc card.

My model is the c3200.

I tried to mount it ( mount /dev/mmcda1 /mnt/card) but nothing happends.Also i have formated it in fat 32 and fat 16.

Thanks in advance for your help
Title: My Zaurus Not Recognize The Card [fixed]
Post by: harvell on December 24, 2006, 01:12:33 pm: Quote
Hi, I´m a new user with zaurus. When i´m purchased it already comes with cacko rom, all goes good but it doesn't recognize my sd or mmc card.

My model is the c3200.

I tried to mount it ( mount /dev/mmcda1 /mnt/card) but nothing happends.Also i have formated it in fat 32 and fat 16.

Thanks in advance for your help
[div align=\"right\"][a href=\"index.php?act=findpost&pid=148981\"][{POST_SNAPBACK}][/a][/div]

What's the size of your card? Is it bigger than 1Gb? If thats the case you would have to upgrade the drivers for it.
Title: My Zaurus Not Recognize The Card [fixed]
Post by: jalismak on December 24, 2006, 01:33:07 pm: it's a 1 gb SD card.

Also i tried with a mini MMC with adapter ( 256 MB) and nothing.

I have installed the driver for bigger cards, automounter and others. I don´t know what to do.
Title: My Zaurus Not Recognize The Card [fixed]
Post by: harvell on December 24, 2006, 06:41:54 pm: Quote
it's a 1 gb SD card.

Also i tried with a mini MMC with adapter ( 256 MB) and nothing.

I have installed the driver for bigger cards, automounter and others. I don´t know what to do.
[div align=\"right\"][a href=\"index.php?act=findpost&pid=149004\"][{POST_SNAPBACK}][/a][/div]

What do you get when you type

dmesg

from the console? Make sure to type it in right after you insert the card.
Title: My Zaurus Not Recognize The Card [fixed]
Post by: jalismak on December 24, 2006, 07:36:00 pm: thx harvell for the tip, I don´t know this command :-)

I introduced demsg just after insert the SD card and here is the result:

Code: [Select]
zed mount option quiet mmcda: mmcda1 < mmcda5 > mmcda: mmcda1 < mmcda5 > cramfs: wrong magic mmcda: mmcda1 < mmcda5 > mmcda: mmcda1 < mmcda5 > attempt to access beyond end of device 3c:01: rw=0, want=2, limit=1 MINIX-fs: unable to read superblock mmcda: mmcda1 < mmcda5 > mmcda: mmcda1 < mmcda5 > MSDOS FS: IO charset utf8 FAT: bogus logical sector size 0 VFS: Can't find a valid FAT filesystem on dev 3c:01. FAT: freeing iocharset=utf8 mmcda: mmcda1 < mmcda5 > mmcda: mmcda1 < mmcda5 > jffs2: attempt to mount non-MTD device 3c:01 mmcda: mmcda1 < mmcda5 > mmcda: mmcda1 < mmcda5 > SQUASHFS error: Can't find a SQUASHFS superblock on mmcd(60,1) usbdcore: usbdcore 0.1 035 2002-06-12 20:00 (dbg="") mmcda: mmcda1 < mmcda5 > mmcda: mmcda1 < mmcda5 > attempt to access beyond end of device 3c:01: rw=0, want=2, limit=1 EXT3-fs: unable to read superblock mmcda: mmcda1 < mmcda5 > mmcda: mmcda1 < mmcda5 > attempt to access beyond end of device 3c:01: rw=0, want=2, limit=1 EXT2-fs: unable to read superblock mmcda: mmcda1 < mmcda5 > mmcda: mmcda1 < mmcda5 > cramfs: wrong magic mmcda: mmcda1 < mmcda5 > mmcda: mmcda1 < mmcda5 > attempt to access beyond end of device 3c:01: rw=0, want=2, limit=1 MINIX-fs: unable to read superblock mmcda: mmcda1 < mmcda5 > mmcda: mmcda1 < mmcda5 > FAT: bogus logical sector size 0 VFS: Can't find a valid FAT filesystem on dev 3c:01. mmcda: mmcda1 < mmcda5 > mmcda: mmcda1 < mmcda5 > jffs2: attempt to mount non-MTD device 3c:01 mmcda: mmcda1 < mmcda5 > mmcda: mmcda1 < mmcda5 > SQUASHFS error: Can't find a SQUASHFS superblock on mmcd(60,1) storage_fd: storage_fd 0.1 035 2002-06-12 20:00 (OUT=64,IN=64) storage_fd: vendorID: 4dd productID: 9050 pxa27x_bi 0.1-alpha 035 2002-06-12 20:00 (dbg="") bi_modinit: call udc_startup_events bi_device_event: call udc_enable bi_device_event: call udc_all_interrupts udc_connect: usb-device is not active. change resolution 240x320 => 480x640 pxa_sd_wait_response: responce time out (cmd=52 MMC_STAT=0x2142) pxa_sd_wait_response: responce time out (cmd=05 MMC_STAT=0x2142) [SD]-clustsize = 4000 mmcda: mmcda1 < mmcda5 > mmcda: mmcda1 < mmcda5 > EXT3-fs: Unrecognized mount option quiet mmcda: mmcda1 < mmcda5 > mmcda: mmcda1 < mmcda5 > EXT2-fs: Unrecognized mount option quiet mmcda: mmcda1 < mmcda5 > mmcda: mmcda1 < mmcda5 > cramfs: wrong magic mmcda: mmcda1 < mmcda5 > mmcda: mmcda1 < mmcda5 > attempt to access beyond end of device 3c:01: rw=0, want=2, limit=1 MINIX-fs: unable to read superblock mmcda: mmcda1 < mmcda5 > mmcda: mmcda1 < mmcda5 > MSDOS FS: IO charset utf8 FAT: bogus logical sector size 0 VFS: Can't find a valid FAT filesystem on dev 3c:01. FAT: freeing iocharset=utf8 mmcda: mmcda1 < mmcda5 > mmcda: mmcda1 < mmcda5 > jffs2: attempt to mount non-MTD device 3c:01 mmcda: mmcda1 < mmcda5 > mmcda: mmcda1 < mmcda5 > SQUASHFS error: Can't find a SQUASHFS superblock on mmcd(60,1) mmcda: mmcda1 < mmcda5 > mmcda: mmcda1 < mmcda5 > attempt to access beyond end of device 3c:01: rw=0, want=2, limit=1 EXT3-fs: unable to read superblock mmcda: mmcda1 < mmcda5 > mmcda: mmcda1 < mmcda5 > attempt to access beyond end of device 3c:01: rw=0, want=2, limit=1 EXT2-fs: unable to read superblock mmcda: mmcda1 < mmcda5 > mmcda: mmcda1 < mmcda5 > cramfs: wrong magic mmcda: mmcda1 < mmcda5 > mmcda: mmcda1 < mmcda5 > attempt to access beyond end of device 3c:01: rw=0, want=2, limit=1 MINIX-fs: unable to read superblock mmcda: mmcda1 < mmcda5 > mmcda: mmcda1 < mmcda5 > FAT: bogus logical sector size 0 VFS: Can't find a valid FAT filesystem on dev 3c:01. mmcda: mmcda1 < mmcda5 > mmcda: mmcda1 < mmcda5 > jffs2: attempt to mount non-MTD device 3c:01 mmcda: mmcda1 < mmcda5 > mmcda: mmcda1 < mmcda5 > SQUASHFS error: Can't find a SQUASHFS superblock on mmcd(60,1) pxa_sd_wait_response: responce time out (cmd=52 MMC_STAT=0x2142) pxa_sd_wait_response: responce time out (cmd=05 MMC_STAT=0x2142) [SD]-clustsize = 4000 mmcda: mmcda1 < mmcda5 > mmcda: mmcda1 < mmcda5 > EXT3-fs: Unrecognized mount option quiet mmcda: mmcda1 < mmcda5 > mmcda: mmcda1 < mmcda5 > EXT2-fs: Unrecognized mount option quiet mmcda: mmcda1 < mmcda5 > mmcda: mmcda1 < mmcda5 > cramfs: wrong magic mmcda: mmcda1 < mmcda5 > mmcda: mmcda1 < mmcda5 > attempt to access beyond end of device 3c:01: rw=0, want=2, limit=1 MINIX-fs: unable to read superblock mmcda: mmcda1 < mmcda5 > mmcda: mmcda1 < mmcda5 > MSDOS FS: IO charset utf8 FAT: bogus logical sector size 0 VFS: Can't find a valid FAT filesystem on dev 3c:01. FAT: freeing iocharset=utf8 mmcda: mmcda1 < mmcda5 > mmcda: mmcda1 < mmcda5 > jffs2: attempt to mount non-MTD device 3c:01 mmcda: mmcda1 < mmcda5 > mmcda: mmcda1 < mmcda5 > SQUASHFS error: Can't find a SQUASHFS superblock on mmcd(60,1) mmcda: mmcda1 < mmcda5 > mmcda: mmcda1 < mmcda5 > attempt to access beyond end of device 3c:01: rw=0, want=2, limit=1 EXT3-fs: unable to read superblock mmcda: mmcda1 < mmcda5 > mmcda: mmcda1 < mmcda5 > attempt to access beyond end of device 3c:01: rw=0, want=2, limit=1 EXT2-fs: unable to read superblock mmcda: mmcda1 < mmcda5 > mmcda: mmcda1 < mmcda5 > cramfs: wrong magic mmcda: mmcda1 < mmcda5 > mmcda: mmcda1 < mmcda5 > attempt to access beyond end of device 3c:01: rw=0, want=2, limit=1 MINIX-fs: unable to read superblock mmcda: mmcda1 < mmcda5 > mmcda: mmcda1 < mmcda5 > FAT: bogus logical sector size 0 VFS: Can't find a valid FAT filesystem on dev 3c:01. mmcda: mmcda1 < mmcda5 > mmcda: mmcda1 < mmcda5 > jffs2: attempt to mount non-MTD device 3c:01 mmcda: mmcda1 < mmcda5 > mmcda: mmcda1 < mmcda5 > SQUASHFS error: Can't find a SQUASHFS superblock on mmcd(60,1) pxa_sd_wait_response: responce time out (cmd=52 MMC_STAT=0x2142) pxa_sd_wait_response: responce time out (cmd=05 MMC_STAT=0x2142) [SD]-clustsize = 4000 mmcda: mmcda1 < mmcda5 > mmcda: mmcda1 < mmcda5 > EXT3-fs: Unrecognized mount option quiet mmcda: mmcda1 < mmcda5 > mmcda: mmcda1 < mmcda5 > EXT2-fs: Unrecognized mount option quiet mmcda: mmcda1 < mmcda5 > mmcda: mmcda1 < mmcda5 > cramfs: wrong magic mmcda: mmcda1 < mmcda5 > mmcda: mmcda1 < mmcda5 > attempt to access beyond end of device 3c:01: rw=0, want=2, limit=1 MINIX-fs: unable to read superblock mmcda: mmcda1 < mmcda5 > mmcda: mmcda1 < mmcda5 > MSDOS FS: IO charset utf8 FAT: bogus logical sector size 0 VFS: Can't find a valid FAT filesystem on dev 3c:01. FAT: freeing iocharset=utf8 mmcda: mmcda1 < mmcda5 > mmcda: mmcda1 < mmcda5 > jffs2: attempt to mount non-MTD device 3c:01 mmcda: mmcda1 < mmcda5 > mmcda: mmcda1 < mmcda5 > SQUASHFS error: Can't find a SQUASHFS superblock on mmcd(60,1) mmcda: mmcda1 < mmcda5 > mmcda: mmcda1 < mmcda5 > attempt to access beyond end of device 3c:01: rw=0, want=2, limit=1 EXT3-fs: unable to read superblock mmcda: mmcda1 < mmcda5 > mmcda: mmcda1 < mmcda5 > attempt to access beyond end of device 3c:01: rw=0, want=2, limit=1 EXT2-fs: unable to read superblock mmcda: mmcda1 < mmcda5 > mmcda: mmcda1 < mmcda5 > cramfs: wrong magic mmcda: mmcda1 < mmcda5 > mmcda: mmcda1 < mmcda5 > attempt to access beyond end of device 3c:01: rw=0, want=2, limit=1 MINIX-fs: unable to read superblock mmcda: mmcda1 < mmcda5 > mmcda: mmcda1 < mmcda5 > FAT: bogus logical sector size 0 VFS: Can't find a valid FAT filesystem on dev 3c:01. mmcda: mmcda1 < mmcda5 > mmcda: mmcda1 < mmcda5 > jffs2: attempt to mount non-MTD device 3c:01 mmcda: mmcda1 < mmcda5 > mmcda: mmcda1 < mmcda5 > SQUASHFS error: Can't find a SQUASHFS superblock on mmcd(60,1)
It seems that the sd card have a unrecognized format?? I use storage tools from my PocketPC ( qtek 9090) which can format the sd card in FAT 12, 16 or 32 and also select cluster size.
Title: My Zaurus Not Recognize The Card [fixed]
Post by: Jon_J on December 24, 2006, 08:04:04 pm: Try a different card to see if your Zaurus is working with SD cards, or format it as fat16 on a windows box.
Some people here have had luck formatting defunct cards in a camera, then using it in their Zaurus.
Title: My Zaurus Not Recognize The Card [fixed]
Post by: harvell on December 25, 2006, 04:05:34 am: Also when you are in fdisk make sure there is not multiple partitions on the card. Sometimes they come with a lot of partitions out the gate. Make sure it's only one or two partitions.
Title: My Zaurus Not Recognize The Card [fixed]
Post by: jalismak on December 25, 2006, 07:55:00 am: Hi.

Thanks for help me.

I know that the card is functionality because is recognized in my Windows, Linux, PocketPC and Palm.

I change to ubuntu and verify that the SD only have one partition, aslo i tried formating to FAT 16 and ext3 on ubuntu and nothing changes. I haven't a SD camera to format it

I have a MMC mobile from my nokia mobile, i have tried with the zaurus with a adapter and demsg says the same.

I'm desperate. I don't know nothing about this but if possible that it would be for the zaurus and not for the SD??
Title: My Zaurus Not Recognize The Card [fixed]
Post by: harvell on December 25, 2006, 02:02:32 pm: Have you formated and partitioned it through the Z?
Title: My Zaurus Not Recognize The Card [fixed]
Post by: jalismak on December 25, 2006, 06:18:59 pm: I tried to format with the zaurus:

mkfs.vfat -F 16 /dev/mmcda1

and the result is:

unable to open /dev/mmcda1
Title: My Zaurus Not Recognize The Card [fixed]
Post by: John Galt on December 26, 2006, 03:38:09 pm: Quote
I tried to format with the zaurus:

mkfs.vfat -F 16 /dev/mmcda1

and the result is:

unable to open /dev/mmcda1

[div align=\"right\"][a href=\"index.php?act=findpost&pid=149080\"][{POST_SNAPBACK}][/a][/div]

I've been having similar problems with a 4 GB SD card. The 1 GB is recognised and mounted, and so is a 2 GD mini SD with an SD adaptor. A 2 GD CF also works. All these work fine after I installed the driver provided elsewhere in the forum. However, after 2 weeks of operation, the 4 GB SD wasn't recognised by my Z (C3000). On top of that the data was lost and I had to reformat in in Windoze as FAT32. Z still wasn't able to recognise it. Then I tried to mount it (mount /dev/mmcda /mnt/card). That worked while the Z was on. After I turned it off, the card wasn't mounting. I had to mount it manually...maybe a manual mount might work for you...

N.
Title: My Zaurus Not Recognize The Card [fixed]
Post by: speculatrix on December 26, 2006, 07:00:51 pm: this is what I would do...

try doing "fdisk /dev/mmcda" then "p" to print. verify there's only one partition, if not delete all partitions, create one primary one, set to fat 32 type, write the partition, eject the card, reinsert, format with mkfs.vfat.
Title: My Zaurus Not Recognize The Card [fixed]
Post by: jalismak on December 27, 2006, 04:46:13 am: Wow!

Thanks all for help and especially to speculatrix . I have do that steps, after I mounted the card manually as John Galt sais, and... my SD card works perfectly!

I don´t know why not worked when I format the SD in my pocket,windows or linux and yes when I did in Z
Title: My Zaurus Not Recognize The Card [fixed]
Post by: speculatrix on December 27, 2006, 05:37:37 am: Quote
I don´t know why not worked when I format the SD in my pocket,windows or linux and yes when I did in Z
[div align=\"right\"][a href=\"index.php?act=findpost&pid=149221\"][{POST_SNAPBACK}][/a][/div]

if the card's partition table is wiped, a windows box will create the file system filling the whole disk (i.e /dev/mmcda and not /dev/mmcda1). You CAN mount it on Z manually, but the automounter stuff (as I understand it) doesn't like the lack of partition.

You create a partitionless filesys on the Z by formatting /dev/mmcda and not /dev/mmcda1, but it just seems to cause problems.
Title: My Zaurus Not Recognize The Card [fixed]
Post by: jalismak on December 27, 2006, 03:37:20 pm: I'll not forget it