OESF Portables Forum
Everything Else => Sharp Zaurus => Model Specific Forums => Distros, Development, and Model Specific Forums => Archived Forums => C1000/3x00 General discussions => Topic started by: Z3n on January 19, 2007, 10:35:16 am
-
Alright, decided it was time to try out the OZ 3.4.5.1 distro but because I had Cacko 1.23 installed previously I needed to do a NAND restore to get the original partitions back.
Right...
So, I grab the NAND restore file and I get to the NAND flash utility, flash the Z and here is what I got...
NAND Restore from CF
file: SYSTC100.DBK
Execute restore? -> pressed OK
Delete all flash data? -> pressed OK
Restore...OK
Alright, so it looks like it restored (Green bar all the way across bottom of screen). But pushing OK doesn't do anything. Pressing On/Off doesn't do anything. Is it waiting to finish something or do I need to remove the battery and reboot it that way?
Don't want to fry the little guy...
Thanks.
Z3n
-
Ok, I went ahead and removed the battery to get it rebooted... Sharp screen came up and it appeared to be booting...
Rebooted again and flashed to OZ... and I am now looking at Opie 1.2
-
all you had to do was press cancel aka "esc" lil button to directional pad
Late