OESF Portables Forum
Model Specific Forums => Sharp Zaurus => Zaurus - pdaXrom => Topic started by: radiochickenwax on February 10, 2007, 06:02:48 pm
-
I've tried a number of different versions of fluxbox including compiling the cvs version; albeit, I did this with gcc 3.4.5 instead of gcc 3.4.6.
The only one that's actually loaded at all seems to be "fluxbox_0.9.10_armv5tel"
from http://zaurus.spy.org/feeds/cacko/pdaXrom/unstable/ (http://zaurus.spy.org/feeds/cacko/pdaXrom/unstable/)
It took maybe five to ten minutes to load, and it apparently won't load again.
I'm trying to run this on pdaxii13 build 5.3 for akita. I've also tried using the "xsessions" program announced at the bottom of this page:
http://www.tyrannozaurus.com/?q=node/210 (http://www.tyrannozaurus.com/?q=node/210)
but that hasn't helped me so far.
Any ideas? Does anybody use this? Any help would be appreciated.
-
I've tried a number of different versions of fluxbox including compiling the cvs version; albeit, I did this with gcc 3.4.5 instead of gcc 3.4.6.
The only one that's actually loaded at all seems to be "fluxbox_0.9.10_armv5tel"
from http://zaurus.spy.org/feeds/cacko/pdaXrom/unstable/ (http://zaurus.spy.org/feeds/cacko/pdaXrom/unstable/)
It took maybe five to ten minutes to load, and it apparently won't load again.
I'm trying to run this on pdaxii13 build 5.3 for akita. I've also tried using the "xsessions" program announced at the bottom of this page:
http://www.tyrannozaurus.com/?q=node/210 (http://www.tyrannozaurus.com/?q=node/210)
but that hasn't helped me so far.
Any ideas? Does anybody use this? Any help would be appreciated.
[div align=\"right\"][a href=\"index.php?act=findpost&pid=153742\"][{POST_SNAPBACK}][/a][/div]
fluxbox is in the beta1 feed, I only tried the xqt version which worked fine, so the regular pdaXrom version should be ok too I presume since beta1 binaries are very stable. the only thing missing really is the config files. i would suggest using fluxconf which is great for configuring the way fluxbox works and its key bindings, etc... but before all that you need a proper fbsession files which you then symlink to .xinitrc
the xsesssion selector just relinks fbsession to .xinitrc. it assumes you already have the correct session files, ie for openbox mbsession, for fluxbox fbsession, for icewm ice-session and for xfce xfce-session
in the future, xsession package will also include those session files as well once i customised some of them to my liking...
-
the only thing missing really is the config files
That's not really a problem. I have my .fluxbox files backed up. In fact that's the reason I like fluxbox. I've been using it for awhile, and I've grown quite accustomed to doing things that way. Probably what keeps me from migrating to FVWM.
fluxbox is in the beta1 feed, I only tried the xqt version which worked fine,
I'll try the beta1 and X/QT packages, but I'm a little skeptical. I suppose I'd been trying the beta3 packages and pre-beta1 packages. This runs very slow on the standard beta3 for me also. Takes about 5-10 minutes to load on a 3200 whereas it loads in 30sec or less on a 6000.
the xsesssion selector just relinks fbsession to .xinitrc. it assumes you already have the correct session files, ie for openbox mbsession, for fluxbox fbsession, for icewm ice-session and for xfce xfce-session
I'm still a little confused about how to do this manually, and I didn't really give more than a perfunctory look at the "xsessions" ipk. I think I might be able to figure it out from here...
-
A little more about the problem:
fluxbox does load eventually, but it takes way too long. I've been trying to load the version from beta1 on my 3200 for the past 1/2 hour, but still nothing.
The version I mentioned earlier (0.9.10) loads in under 1/2 hour, but this is still far too long.
I'm running an xterm in the .xinitrc file. After a long while, this becomes "active" and lets me run the "top" process which shows the "X" process running at about 98.8% CPU unitl fluxbox loads.
Still haven't tried the X/QT package, since I'm still waiting to see if the beta1 package will ever load completely.
-
A little more about the problem:
fluxbox does load eventually, but it takes way too long. I've been trying to load the version from beta1 on my 3200 for the past 1/2 hour, but still nothing.
The version I mentioned earlier (0.9.10) loads in under 1/2 hour, but this is still far too long.
I'm running an xterm in the .xinitrc file. After a long while, this becomes "active" and lets me run the "top" process which shows the "X" process running at about 98.8% CPU unitl fluxbox loads.
Still haven't tried the X/QT package, since I'm still waiting to see if the beta1 package will ever load completely.
[div align=\"right\"][a href=\"index.php?act=findpost&pid=153756\"][{POST_SNAPBACK}][/a][/div]
you cannot run the XQt package. Its for Sharp ROM. I just mentioned it because I have run beta1 packages both in pdaXrom beta1 and Sharp ROM under XQT using the respective package feeds and observed that they behaved exactly the same under each distro, so my point is that the quality of the packages are the same for each distro feed for beta1.
fluxbox should load in under a minute...
there is something terribly wrong with your setup...
-
fluxbox should load in under a minute...
there is something terribly wrong with your setup...
[div align=\"right\"][a href=\"index.php?act=findpost&pid=153764\"][{POST_SNAPBACK}][/a][/div]
I agree. But where is it going wrong? I'm thinking that this is specific to fluxbox in beta3 on my 3200, since the exact same configuration in beta1 on my 6000 works flawlessly, and openbox runs flawlessly on my 3200.
I guess I was just wondering if any other 3200 users have had this problem, or if I can just narrow it down to my machine.. in which case, I might be wasting everybody's time by posting this here, and I don't mean/want to do that.
-
fluxbox should load in under a minute...
there is something terribly wrong with your setup...
[div align=\"right\"][a href=\"index.php?act=findpost&pid=153764\"][{POST_SNAPBACK}][/a][/div]
I agree. But where is it going wrong? I'm thinking that this is specific to fluxbox in beta3 on my 3200, since the exact same configuration in beta1 on my 6000 works flawlessly, and openbox runs flawlessly on my 3200.
I guess I was just wondering if any other 3200 users have had this problem, or if I can just narrow it down to my machine.. in which case, I might be wasting everybody's time by posting this here, and I don't mean/want to do that.
[div align=\"right\"][a href=\"index.php?act=findpost&pid=153773\"][{POST_SNAPBACK}][/a][/div]
one way to test is to use your openbox .xinitrc and just replace the line which starts openbox with fluxbox and see if that starts quickly. if it does, then its your fluxbox .xinitrc script...
-
one way to test is to use your openbox .xinitrc and just replace the line which starts openbox with fluxbox and see if that starts quickly. if it does, then its your fluxbox .xinitrc script...
[div align=\"right\"][{POST_SNAPBACK}][/a][/div] (http://index.php?act=findpost&pid=153776\")
Yes I did this, and it still takes forever.
[edit:]
I've tried a bare .xinitrc file containing only:
exec fluxbox
and this takes the same amount of time to load.
[edit2:]
you cannot run the XQt package. Its for Sharp ROM.
I think you can run XQT packages from the following feed on pdaxrom:
[a href=\"http://distro.ibiblio.org/pub/linux/distributions/pdaxrom/download/1.1.0beta1/XQt/feed/]http://distro.ibiblio.org/pub/linux/distri...beta1/XQt/feed/[/url]
but I can't confirm this yet
[edit3:]
I confirmed this feed to work, but the fluxbox program still doesn't work for me.
I'm trying blackbox, which is similar in appearance, and also works flawlessly but I'm still stumped about why fluxbox won't work for me. Blackbox doesn't have nearly the functionality that fluxbox has.
-
You could try the latest fluxbox package fluxbox_1.0rc2 form here:
https://www.oesf.org/forums/index.php?showtopic=21726&st=30 (https://www.oesf.org/forums/index.php?showtopic=21726&st=30)
-
You could try the latest fluxbox package fluxbox_1.0rc2 form here:
https://www.oesf.org/forums/index.php?showtopic=21726&st=30 (https://www.oesf.org/forums/index.php?showtopic=21726&st=30)
[div align=\"right\"][{POST_SNAPBACK}][/a][/div] (http://index.php?act=findpost&pid=153797\")
Thanks, but see post #10 here [a href=\"https://www.oesf.org/forums/index.php?showtopic=23205#](link)[/url]
-
updated fluxbox for pdaXii13 and it loads in seconds
http://www.tyrannozaurus.com/feed/beta3/cu...-2_armv5tel.ipk (http://www.tyrannozaurus.com/feed/beta3/custom/fluxbox_0.9.12-2_armv5tel.ipk)
-
updated fluxbox for pdaXii13 and it loads in seconds
http://www.tyrannozaurus.com/feed/beta3/cu...-2_armv5tel.ipk (http://www.tyrannozaurus.com/feed/beta3/custom/fluxbox_0.9.12-2_armv5tel.ipk)
[div align=\"right\"][a href=\"index.php?act=findpost&pid=154051\"][{POST_SNAPBACK}][/a][/div]
Thanks again, meanie... testing right now.
[EDIT:]
Did you build feh or something into this? With my bare .xinitrc,
(exec fluxbox)
it loads the pdaxrom background wallpaper and mousing over this moves it around like a layer in gimp with a transparent background.
-
updated fluxbox for pdaXii13 and it loads in seconds
http://www.tyrannozaurus.com/feed/beta3/cu...-2_armv5tel.ipk (http://www.tyrannozaurus.com/feed/beta3/custom/fluxbox_0.9.12-2_armv5tel.ipk)
[div align=\"right\"][a href=\"index.php?act=findpost&pid=154051\"][{POST_SNAPBACK}][/a][/div]
Thanks again, meanie... testing right now.
[EDIT:]
Did you build feh or something into this? With my bare .xinitrc,
(exec fluxbox)
it loads the pdaxrom background wallpaper and mousing over this moves it around like a layer in gimp with a transparent background.
[div align=\"right\"][a href=\"index.php?act=findpost&pid=154109\"][{POST_SNAPBACK}][/a][/div]
I'm really thinking this is specific to a 3200, since it loads for everyone else in seconds.
Worse (for me), it could just be my 3200, not all 3200s.
Not much increase in speed so far when run in place of openbox in the default .xinitrc.
I've been flashing back and forth between pdaxii13 and the standard beta3, and fluxbox definitely works better in the standard beta3, but I really like what you've done with pdaxii13 overall.
Fluxbox on a 3200 is really my only gripe so far. I guess when I get the chance, I'll try rc121 since it looks like development is expanding in a more official sense.
-
I couldnt get fluxbox working on rc121 too. That and no usb suuport were the reasons i decided to stick to beta1 in my c860.
tovarish
-
updated fluxbox to work with pdaXii13.
this updated fluxbox package loads pretty quickly under pdaXii13 and also contains custom keys and menu config files
use it in conjunction with xselect which is part of the xsession package to switch between openbox and fluxbox. xselect is a ncurses dialog script which runs from outside of X, ie from the console after you exit X, run xselect to get a GUI to select which window manager you want (currently only openbox and fluxbox will work) and then startx afterwards to start X using the window manager you chose.
http://www.tyrannozaurus.com/feed/custom/f...-2_armv5tel.ipk (http://www.tyrannozaurus.com/feed/custom/fluxbox_0.9.12-2_armv5tel.ipk)
http://www.tyrannozaurus.com/feed/custom/x...-2_armv5tel.ipk (http://www.tyrannozaurus.com/feed/custom/xsessions_0.5.3-2_armv5tel.ipk)
-
Hi Meanie
Can you please not include your customisations in the application package, especially files in $HOME. installing the package overwrites others customisation. luckily i made backups before installing fluxbox. If you would like to share your customisations please put them in another package.
Also this version of fluxbox is without XFT support and hence antialiased fonts dont work.
tovarish
-
I couldnt get fluxbox working on rc121 too. That and no usb suuport were the reasons i decided to stick to beta1 in my c860.
tovarish
[div align=\"right\"][a href=\"index.php?act=findpost&pid=154222\"][{POST_SNAPBACK}][/a][/div]
fluxbox works pretty well for me so far in rc121 on a 3200. There's a whole bunch of other things that are keeping me thinking beta3 is more stable for now. Haven't tried meanie's latest pdaxii13 fluxbox packages yet, but the previous ones didn't work, they first loaded fluxbox, then feh and then froze.
Can anyone else confirm this?