OESF Portables Forum

Model Specific Forums => Sharp Zaurus => Zaurus - pdaXrom => Topic started by: andrewwoods on March 30, 2007, 08:11:33 am

Title: How To Install 121
Post by: andrewwoods on March 30, 2007, 08:11:33 am

I stuffed up my C860 Beta2 a couple of weeks ago, and the NAND backups that I thought I had were missing. Never mind - all my actual documents and emails were on the SD card, so I'll just reflash and reinstall.

But I thought I'd make that big leap into u-boot / 121 land.

So I downloaded 121 and u-boot and tried to find instructions. But the instructions were really quite out of date.

Please can somebody give me a noddy guide to how to do this.

I have done the following:

1. downloaded 121 to my laptop.
2. formatted my 512MB cf card as FAT
3. copied all the u-boot files to CF
4. rebooted with OK pressed, as though I was doing a beta1 install
5. Lots of messages flashed passed about (I presume) memory being updated.
6. System said Rebooting. and stopped. So I pulled the battery out.
7. I reformatted the card again, and copied the 121 files onto it.
8. Reboot with OK does nothing.
9. Reboot with C&D just makes battery & mail leds flash.

Have I taken the right action. What did I do wrong?

I have an original NAND backup that I can restore from (SHARP rom and loader).

What should I do next?

Thanks
Andrew

Title: How To Install 121
Post by: andrewwoods on March 30, 2007, 08:14:15 am

Following these instructions
https://www.oesf.org/forums/index.php?showtopic=23209 (https://www.oesf.org/forums/index.php?showtopic=23209)
I can get the emergency system to boot.

But it just says:

-sh03.00#

There's no running of the autoexec.

Title: How To Install 121
Post by: InSearchOf on March 30, 2007, 08:57:19 am

Quote

Following these instructions
https://www.oesf.org/forums/index.php?showtopic=23209 (https://www.oesf.org/forums/index.php?showtopic=23209)
I can get the emergency system to boot.

But it just says:

-sh03.00#

There's no running of the autoexec.
[div align=\"right\"][a href=\"index.php?act=findpost&pid=157579\"][{POST_SNAPBACK}][/a][/div]

depending on the medium you are using for install...

either

Code: [Select]

cd /mnt/cf/or

Code: [Select]

cd /mnt/card/then

Code: [Select]

sh autoboot.sh ./Late

Title: How To Install 121
Post by: andrewwoods on March 30, 2007, 11:27:55 am

I did that and it just sits there.

If I do
ls /mnt/cf
then it just freezes as well.

How should the CF be formatted? I've tried FAT, FAT32 and ext2.

Title: How To Install 121
Post by: InSearchOf on March 30, 2007, 12:05:38 pm

I would suggest fat... but all 3 should be recognized...

Late

Title: How To Install 121
Post by: raduga on March 30, 2007, 01:43:47 pm

Quote

I would suggest fat... but all 3 should be recognized...

Late
[div align=\"right\"][a href=\"index.php?act=findpost&pid=157600\"][{POST_SNAPBACK}][/a][/div]

any chance of a new ( > 121 ) release, this week?

Title: How To Install 121
Post by: donquixote on March 30, 2007, 02:02:43 pm

Yeah, don't bother upgrading to 121 since a newer version is going to be immanently released (so we've been told).

dq

Title: How To Install 121
Post by: andrewwoods on March 30, 2007, 03:20:59 pm

OK, I got it to install by putting the files on my ext2 SD card instead of my CF card.

So now I have a bootable system.

Thank you

Title: How To Install 121
Post by: andrewwoods on March 30, 2007, 03:22:17 pm

Quote

Yeah, don't bother upgrading to 121 since a newer version is going to be immanently released (so we've been told).

dq
[div align=\"right\"][a href=\"index.php?act=findpost&pid=157607\"][{POST_SNAPBACK}][/a][/div]

But if I didn't upgrade I had Sharp ROM or a brick. I'd like to go to the new version, but still waiting...