OESF Portables Forum
Everything Else => Sharp Zaurus => Model Specific Forums => Distros, Development, and Model Specific Forums => Archived Forums => C1000/3x00 General discussions => Topic started by: Zauri on May 14, 2007, 02:12:23 am
-
I bought my Z C3200 very recently, & part of the appeal of this purchase was because I read in an article that it is possible to synchronise the Z with Outlook, via Intellisync. Although, the method suggested that I needed to use the SL5500 version of intellisync plus, I had to use the Japanese drivers off the Z's CD. I have downloaded the SL5500's intellisync from www.myzaurus.com but am not sure where to go from here. I am running XP SP2 and Outlook 2002. I am aware that there are other threads about this topic but the results that others have had seemed somewhat unclear. I read one result as having to load the drivers every time they connected their Z to their PC. This seems to be a hassle for the user.
Is there any clear-cut method to accomplish successful Outlook synchronisation between Z C3100, C3200, & a PC?
-
Suggest that you visit the TriSoft web site & download the PDF that tells you all you need to know.
Mike
-
Suggest that you visit the TriSoft web site & download the PDF that tells you all you need to know.
Mike
[div align=\"right\"][a href=\"index.php?act=findpost&pid=161238\"][{POST_SNAPBACK}][/a][/div]
Is this the www.trisoft.de website? Because I couldn't find a PDF there for setting up C3x00's with Intellisync & XP. I found a webpage for SL-C860 but that wasn't helpful.
-
Hi Zauri,
...Is this the www.trisoft.de website?...
what else ?
OK, here you go:
Get (and read) the PDF-manual on this page:
SL-C3200 startup guide (http://www.trisoft.de/en_c3200howto.htm)
There's a reference to our "IntelliSync HowTo":
zipped RTF Document (http://www.trisoft.de/download/c3000sync.zip)
Follow the steps and enjoy syncing (ok, enjoy it more or less...,
it's IntelliSync and we don't know what the "Intelli" is referring to...).
///TRIsoft
Marc Stephan
-
Have outlook installed on the PC, then go here:
http://www.trisoft.de/en_c860winxpsetup.htm (http://www.trisoft.de/en_c860winxpsetup.htm)
and follow the instructions
-
Hi deluxe,
Have outlook installed on the PC, then go here:
http://www.trisoft.de/en_c860winxpsetup.htm (http://www.trisoft.de/en_c860winxpsetup.htm)
and follow the instructions
hmmmm. I would be very surprised, if this works...
But we're all learning something more every day
///TRIsoft
Marc Stephan
-
Hi deluxe,
Have outlook installed on the PC, then go here:
http://www.trisoft.de/en_c860winxpsetup.htm (http://www.trisoft.de/en_c860winxpsetup.htm)
and follow the instructions
hmmmm. I would be very surprised, if this works...
But we're all learning something more every day
///TRIsoft
Marc Stephan
[div align=\"right\"][a href=\"index.php?act=findpost&pid=161288\"][{POST_SNAPBACK}][/a][/div]
Well, I respect your raised eyebrows very much, so I went back to the linked page and checked that that's what I followed........and it is, and I am saying it worked with my SL-C1000 and a WinXP desktop PC.
Aside from the fact the instructions are aimed at a sl-c860, is there any other particular reason you are so surprised it worked??
-
Hi deluxe,
Aside from the fact the instructions are aimed at a sl-c860, is there any other particular reason you are so surprised it worked??
ummm, yes.
Because there was some change in the sync protocol between
the SL-C7x0/860 series and the SL-C1000/3x00 models.
And for this reason, we now have these ugly procedure with the
mix between the japanese sync software and the english version.
Looking at your sig, we see that you're working with the Cacko
Rom. So we guess, that Cacko still uses the "old" version from the
SL-C7x0/860 series.
So maybe, we're both right. And another thing learned: If someone
has trouble syncing, the needed software may depend on the used
Rom (Sharp or Cacko).
///TRIsoft
Marc Stephan
-
Hi Zauri,
...Is this the www.trisoft.de website?...
what else ?
OK, here you go:
Get (and read) the PDF-manual on this page:
SL-C3200 startup guide (http://www.trisoft.de/en_c3200howto.htm)
There's a reference to our "IntelliSync HowTo":
zipped RTF Document (http://www.trisoft.de/download/c3000sync.zip)
Follow the steps and enjoy syncing (ok, enjoy it more or less...,
it's IntelliSync and we don't know what the "Intelli" is referring to...).
///TRIsoft
Marc Stephan
[div align=\"right\"][a href=\"index.php?act=findpost&pid=161261\"][{POST_SNAPBACK}][/a][/div]
Thanks TRIsoft! I got it working OK. Have a slight issue with the PC Link screen coming up on the Zaurus after Synching, but I just close out of it. Other than that, it is working fine.
Zauri:)
-
Hi Zauri,
...Is this the www.trisoft.de website?...
what else ?
OK, here you go:
Get (and read) the PDF-manual on this page:
SL-C3200 startup guide (http://www.trisoft.de/en_c3200howto.htm)
There's a reference to our "IntelliSync HowTo":
zipped RTF Document (http://www.trisoft.de/download/c3000sync.zip)
Follow the steps and enjoy syncing (ok, enjoy it more or less...,
it's IntelliSync and we don't know what the "Intelli" is referring to...).
///TRIsoft
Marc Stephan
[div align=\"right\"][a href=\"index.php?act=findpost&pid=161261\"][{POST_SNAPBACK}][/a][/div]
Thanks TRIsoft! I got it working OK. Have a slight issue with the PC Link screen coming up on the Zaurus after Synching, but I just close out of it. Other than that, it is working fine.
Zauri:)
[div align=\"right\"][a href=\"index.php?act=findpost&pid=161329\"][{POST_SNAPBACK}][/a][/div]
Another issue I have noticed is that my Z doesn't show up in 'My Computer' as a mass storage device, anymore. Anyone able to fix this problem?
-
Zauri
You need to map it as a networked drive via the Tools menu in My Computer if you want to see the drive using the same coomunications method used for syncing.
Alternativly you can set the Zaurus up as a storage device via the PC link icon on the Zaurus, but this has to be disabled when syncing.
Mike
-
Hi Zauri,
Another issue I have noticed is that my Z doesn't show up in 'My Computer' as a mass storage device, anymore. Anyone able to fix this problem?
just go to "Settings" -> "PC-Link".
There you choose between "Storage" or "PC-Link" mode.
But don't forget to switch it back if you want to sync again
///TRIsoft
Marc Stephan