OESF Portables Forum
Everything Else => Sharp Zaurus => Model Specific Forums => Distros, Development, and Model Specific Forums => Archived Forums => 5x00 General discussions => Topic started by: kb7sqi on July 01, 2007, 04:10:27 pm
-
I figured I'd post this to the forums & clear up some misconceptions. First off, if you look back in the thread on the tkcrom w/ home on sd thread, I had posted back in November that I had modified the tkcroms v1 & v2 to use the modified 2 gig sd module and hadn't had any problems testing them. I also modified the stock sharp rom 3.13 the same way. I didn't really do anything special here. All I did was take the /root/etc/rc.d/rs.sysinit script from the TKC V2 ROM & put them in the other 2 roms. I also just swapped out the sd module for the newer one. Extracting the rom on a linux box is pretty simple & just copy'ing some files then doing a mkcramfs on the extracted directory. Nothing special. I just wanted to have that stuff in rom so I didn't have to add it after the fact. I'm attaching the initrd.bin files here so that way anyone can try them out. I also used the same prep-sd script mentioned in the tkcrom thread, version 5. I didn't modify it in anyway. Last thing. I've read in a few of the threads about trying to use the 2 gig sd module on other Z's. I don't recommend you try this. It's not going to work. If you searched the forums, you'll notice that the 5000/5500 Z's don't have a "standard" sd slot like the 5600 and above. That's why OZ versions prior to the 2.6 kernel had to use the same sd module that either came w/ the stock 5500 rom or the modified one mentioned above. I have 5 different Z's and I like them all, but I'll hardly claim to be an expert. I hope the files will be useful to someone. If you have any questions, feel free to add to the post.
-
Here's the tkc rom's.
-
Just to make sure everyone understands why there are 2 sharp 3.13 initrd.bin files. One only has the newer sd module to support 2 gigs and the other one also has the modified rc.sysinit script from the TKC V2 rom. Figured I'd give people a choice. I don't really get to mess w/ my 5500 as much as I like, but while I was re-doing these init.rd files today, since chrisl had asked for them, I started looking at thing I wanted to update again. When I was testing the files today, I made the mistake of not backing up my already modified rom. Oh well, just gives me a reason to do it again. I'm planning on taking the tkcrom v1 rom & updating alot of the command line stuff & the timezone info. Any opinons what people would like updated on this? I'll try to do it when I have time & upload it as well.
-
I downloaded the attachments (please Santa can this problem with attachments be solved by this Christmas? ) and immediately ran into difficulties.
Are the files actually of type gz? If so what options did you use to tar them up.? My desktop gui archive manager says there is a problem and bottles out. If I fiddle about a bit I get an empty directory.
I suppose I could just substitute the updated/upgraded module by hand, but the initrd, especially with the version for sharprom to allow home on SD was very attractive!
Oh well, I suppose I should go and play with the command line and the downloaded files.
Cheers
-
I downloaded the attachments (please Santa can this problem with attachments be solved by this Christmas? ) and immediately ran into difficulties.
Are the files actually of type gz? If so what options did you use to tar them up.? My desktop gui archive manager says there is a problem and bottles out. If I fiddle about a bit I get an empty directory.
I suppose I could just substitute the updated/upgraded module by hand, but the initrd, especially with the version for sharprom to allow home on SD was very attractive!
Oh well, I suppose I should go and play with the command line and the downloaded files.
Cheers
[div align=\"right\"][a href=\"index.php?act=findpost&pid=164175\"][{POST_SNAPBACK}][/a][/div]
I gzip'ed them before uploading them. No tar, just ungzip them & then rename them to initrd.bin to flash them. Sorry, I guess I could've used zip, but I normally use gzip/bzip2 to compress files. I flashed the sharprom w/ 2gig sd module & /home on sd. It's been running fine for 24 hours now.
-
I downloaded the attachments (please Santa can this problem with attachments be solved by this Christmas? ) and immediately ran into difficulties.
Are the files actually of type gz? If so what options did you use to tar them up.? My desktop gui archive manager says there is a problem and bottles out. If I fiddle about a bit I get an empty directory.
I suppose I could just substitute the updated/upgraded module by hand, but the initrd, especially with the version for sharprom to allow home on SD was very attractive!
Oh well, I suppose I should go and play with the command line and the downloaded files.
Cheers
[div align=\"right\"][a href=\"index.php?act=findpost&pid=164175\"][{POST_SNAPBACK}][/a][/div]
I gzip'ed them before uploading them. No tar, just ungzip them & then rename them to initrd.bin to flash them. Sorry, I guess I could've used zip, but I normally use gzip/bzip2 to compress files. I flashed the sharprom w/ 2gig sd module & /home on sd. It's been running fine for 24 hours now.
[div align=\"right\"][a href=\"index.php?act=findpost&pid=164203\"][{POST_SNAPBACK}][/a][/div]
I ended up downloading the roms a couple times. One problem I had was the gzip program that I have kept saying the .gz file was corrupted. So I ultimately downloaded another un-gzipper and it worked. My Z been going for an hour without problems with the modified Sharp ROM and the asyncio kernel..
Chris--
-
Thanks for the info..
Just flashed and the ssh keys are being generated. I'll reboot with the SD card in to see if it still recognises my 512 card. Then I'll go and get a 2 gig card. Just to be lazy, will I need to mess about with the block sizes when I format it? Or can I just run the prep-home-sd script?
I'll catch you later.
Cheers
-
Thanks for the info..
Just flashed and the ssh keys are being generated. I'll reboot with the SD card in to see if it still recognises my 512 card. Then I'll go and get a 2 gig card. Just to be lazy, will I need to mess about with the block sizes when I format it? Or can I just run the prep-home-sd script?
I'll catch you later.
Cheers
[div align=\"right\"][a href=\"index.php?act=findpost&pid=164209\"][{POST_SNAPBACK}][/a][/div]
#su
#cd /mnt/cf
#./prep-home-sd.sh -s 20 -t -c
Wait a minute...didn't you come up with those directions three years ago in a previous post
But I do have a question for folks. I installed everything, ran the script and so far everything runs great. However, my Z no longer recognizes my Belkin wifi card. I plug it in and the green link light goes on, but the network app says there is no card. I've had this problem with the modified tkc rom as well. I am using a slightly different kernel, the asyncio kernel. However, this shouldn't change anything since it is the kernel used by the Sharp ROM with async enabled.
Any easy solutions?
Chris--
-
Thanks for the info..
Just flashed and the ssh keys are being generated. I'll reboot with the SD card in to see if it still recognises my 512 card. Then I'll go and get a 2 gig card. Just to be lazy, will I need to mess about with the block sizes when I format it? Or can I just run the prep-home-sd script?
I'll catch you later.
Cheers
[div align=\"right\"][a href=\"index.php?act=findpost&pid=164209\"][{POST_SNAPBACK}][/a][/div]
#su
#cd /mnt/cf
#./prep-home-sd.sh -s 20 -t -c
Wait a minute...didn't you come up with those directions three years ago in a previous post
But I do have a question for folks. I installed everything, ran the script and so far everything runs great. However, my Z no longer recognizes my Belkin wifi card. I plug it in and the green link light goes on, but the network app says there is no card. I've had this problem with the modified tkc rom as well. I am using a slightly different kernel, the asyncio kernel. However, this shouldn't change anything since it is the kernel used by the Sharp ROM with async enabled.
Any easy solutions?
Chris--
[div align=\"right\"][a href=\"index.php?act=findpost&pid=164222\"][{POST_SNAPBACK}][/a][/div]
Chris,
Check your email. I sent you a new wlan-ng.conf file. Copy it over the original one in /etc/pcmcia. Reboot & your Belkin Card should work now. Let me know if you have any problems. Take care.
-
Thanks for the files and the explanations. I'm happy now.
My collie is going to get lot of maps in its brand new 2G SD.
Here I go
Cheers
EDIT
I've tried initrd.bin_tkrom2.0alpha3_sl5500.2gig_sd.fix.gz, and it works like a charm, with my Kingston Regular 2G SD card.
It seems faster to me than my old 1G Regular Kingston with the original TK2 Sd driver.
I feel like Mr Kane, with the whole world in my hands.
Re-thanks
-
To any admin:
Would you please sticky this thread?
-
Just to add, I bought a 2gb sd card made by "Peak" today, and it works perfectly running it on tkcRom 2.0a3 using this new rom image. It ran straight out of the packaging as well. I've been happily blasting 8 hour trance mixes from it.
-
Stick-a-roo'd
Late
-
Pardon the newbie question, but where do you get the zImage that goes with these initrds?
-
Pardon the newbie question, but where do you get the zImage that goes with these initrds?
[div align=\"right\"][{POST_SNAPBACK}][/a][/div] (http://index.php?act=findpost&pid=166469\")
One size fits all!
I mean that any sharprom compatible zImage is usable with these initrds. For example the cacko one, the tkc one etc.
However, if you are already using sharp 3.13 you don't need a zImage file, you can simply flash with the initrd file on your cf card and the xaurus will run the new initrd and the zImage that it already has.
If you want to use the tkc initrd and feel some religious urge to use the zImage that was originally used with the tkc rom then try this link:-[a href=\"http://zaurus21.free.fr/tkc_rom/]tkc files[/url]
Another tip for you, put the details of your zaurus and which rom you are using in your signature. It helps people to give you relevant answers to any questions.
PS Thanks for the sticky InSearchOf
-
So I already have a 1gig Home on SD Cacko (obviously)... so effectively, to use the 2gig update, i'd simply shove this onto a CF card formatted fat16, Bootable, shove that into my Z, flash, reset, run? does this also fix the Cant-Sync-With-QTopia problem?
-
So I already have a 1gig Home on SD Cacko (obviously)... so effectively, to use the 2gig update, i'd simply shove this onto a CF card formatted fat16, Bootable, shove that into my Z, flash, reset, run? does this also fix the Cant-Sync-With-QTopia problem?
[div align=\"right\"][a href=\"index.php?act=findpost&pid=167804\"][{POST_SNAPBACK}][/a][/div]
Point 1: Not quite. You'd need to run the home-on-sd script and reinstall all your apps. I find that sticking all the ipks on the flashing CF card is useful. Then just ipkg install *.ipk from the console while in the /mnt/cf directory. If you then use the package installer and uninstall one of your apps and then reinstall the links are sorted for you.
Point 2: Do you mean synching with Qtopia desktop in Linux? If so, no joy, this was lost with the Sharp 3.10 roms.
Cheers
-
So I already have a 1gig Home on SD Cacko (obviously)... so effectively, to use the 2gig update, i'd simply shove this onto a CF card formatted fat16, Bootable, shove that into my Z, flash, reset, run? does this also fix the Cant-Sync-With-QTopia problem?
[div align=\"right\"][a href=\"index.php?act=findpost&pid=167804\"][{POST_SNAPBACK}][/a][/div]
Point 1: Not quite. You'd need to run the home-on-sd script and reinstall all your apps. I find that sticking all the ipks on the flashing CF card is useful. Then just ipkg install *.ipk from the console while in the /mnt/cf directory. If you then use the package installer and uninstall one of your apps and then reinstall the links are sorted for you.
I had the home-on-sd script once uppon a time (I tried a TCK2.0/beta2 on SD... it didnt work...), but i lost it.
Point 2: Do you mean synching with Qtopia desktop in Linux? If so, no joy, this was lost with the Sharp 3.10 roms.
Cheers
[div align=\"right\"][a href=\"index.php?act=findpost&pid=167824\"][{POST_SNAPBACK}][/a][/div]
and not quite -- i just want the built in FTP server so i can get files onto it... i've tried tftpd-2 and its going insane....
Cant we silently overlay qtopia-1.6 ontop of a sharp rom?