OESF Portables Forum
Everything Else => Sharp Zaurus => Model Specific Forums => Distros, Development, and Model Specific Forums => Archived Forums => 5x00 Hardware => Topic started by: ME-tan on August 09, 2007, 07:54:23 am
-
Greetings,
I am intending to experiment with serial on the SL5500. I read the thread on creating the serial console cable but have also seen people connecting serual devices such as GPS units straight in. I am guessing that the console cable has some kind of null modem that is not required for connecting other serial devices. I am wondering if I made up a lead with the sharp connector on one end and a male 9 pin D on the other, and wire up to match pins using the zaurus pinout PDF, whether I could plug normal serial devices such as GPS, modems, GPRS phones and other things that speak rs-232 without requiring additional circuitry. Could someone please clarify?
-
Hi,
AFAIK, the port circuitry is the same as the cxx0 series... They are LVTTL (0-3.3V) signal levels... You will need a max3232 IC level convertor or similar to communicate with standard RS232 devices and not to fry your Z. There are circuits around on the forum / wiki I think as well....
Good luck! It's definitely doable from personal experience.
-
Hi,
AFAIK, the port circuitry is the same as the cxx0 series... They are LVTTL (0-3.3V) signal levels... You will need a max3232 IC level convertor or similar to communicate with standard RS232 devices and not to fry your Z. There are circuits around on the forum / wiki I think as well....
Good luck! It's definitely doable from personal experience.
[div align=\"right\"][a href=\"index.php?act=findpost&pid=165988\"][{POST_SNAPBACK}][/a][/div]
OK I have a serial cable for my 6310i coming in the post now, i'll see what I can do with that.