OESF Portables Forum
Everything Else => General Support and Discussion => Zaurus General Forums => Archived Forums => Software => Topic started by: manfly2000 on March 12, 2004, 06:17:07 pm
-
I have a 5500 Sl running rom 3:10. Can someone please tell me where I can get the software to use this feature?
Thanks
-
Here\'s the rotation plugin:
https://www.oesf.org/commu...&release_id=115 (https://www.oesf.org/community/66.180.235.230/project/showfiles20c8.html?group_id=47&release_id=115)
It\'s in the apps package
Greg
-
Thank You Greg2
-
Question Greg2. I,ve installed the app., but the screen does not go into landscape mode. It does like a soft reset but when the screen comes on again, it still has vertical view.
-
it does the same with me on the sharp 3.10 ROM
-
You need the qtopia-rotation_1.5.0_arm.ipk
I\'ll see if I can find the link for you
Greg
-
May I make a suggestion?
What you are using is a bit of code from a different version of qtopia, and because SHarp\'s version of gtopia isn\'t meant to rotate, you have to reset the GUI to make it flip and it frequently fails.
If you want screan rotation, (and who wouldn\'t) you need to install a rom that uses Opie, or qtopia 1.6.2 Both of them have native \"on the fly\" rotation. IMNSHO, the best of these is OpenZaurus 3.3.5
Check out http://www.openzaurus.org (http://www.openzaurus.org) Don\'t bother with 3.3.6 as it\'s not realy meant for the average user, yet.
-
Thanks all
-
It\'s in this package:
SL-5600 Apps
use link below-I have fixed the other link also
Greg
edit:
I\'m sorry it\'s in this package:
https://www.oesf.org/commu...&release_id=115 (https://www.oesf.org/community/66.180.235.230/project/showfiles20c8.html?group_id=47&release_id=115)
Greg
-
May I make a suggestion?
What you are using is a bit of code from a different version of qtopia, and because SHarp\'s version of gtopia isn\'t meant to rotate, you have to reset the GUI to make it flip and it frequently fails.
If you want screan rotation, (and who wouldn\'t) you need to install a rom that uses Opie, or qtopia 1.6.2 Both of them have native \"on the fly\" rotation. IMNSHO, the best of these is OpenZaurus 3.3.5
Check out http://www.openzaurus.org (http://www.openzaurus.org) Don\'t bother with 3.3.6 as it\'s not realy meant for the average user, yet.
I tried OZ. im not to crazy about it; it didn\'t work with the excel and word programs. and it doesn\'t whant to sync on my zaurus.
-
It\'s in this package:
SL-5600 Apps
use link below-I have fixed the other link also
Greg
edit:
I\'m sorry it\'s in this package:
https://www.oesf.org/commu...&release_id=115 (https://www.oesf.org/community/66.180.235.230/project/showfiles20c8.html?group_id=47&release_id=115)
Greg
here is just the file, so you dont have to download the whole package. for dial-up users.
-
markw
I completely forgot that I could attach a file here now....oh well...next time.
Greg
-
I tried OZ. im not to crazy about it; it didn\'t work with the excel and word programs. and it doesn\'t whant to sync on my zaurus.
Sync requires different software as the file format is different
Hancom Sheet and Word work fine for me.
Simon
-
Yes, you have to install different sheet and word ipk\'s than you use for the 3.10 rom and you have to use a different qtopia desktop to sync, but it all works quite nicely. You can find answers to all of these with a quick search on these forums and if you still have problems after looking I\'d be glad to help. OZ is better in MANY respects and if what you listed was all you didn\'t like, you are missing the boat because they are non-issues.
-
mabe i should try it again...
-
Got one problem. Every timeI install the rotation package, my KO/PI app becomes impossible to open. Any ideas out there?
-
Hi, guys. Got a particular problem. I have a 5500 running 3:10. Every time I install qtopia rotation 1.5, (ref. above) I can no longer use my KO/PI app, meaning, can\'t open the app.
Any ideas? I\'m I missing something?
Thanks