OESF Portables Forum
Everything Else => Zaurus Distro Support and Discussion => Distros, Development, and Model Specific Forums => Archived Forums => Debian => Topic started by: 2or0 on November 29, 2007, 11:43:50 am
-
I built new kernel 2.6.23.9 with some patches:
- patched with angstrom and cpufreq
- Patch the frequency scaling bug - touchscreen freezing
- Add FUSE module
- Add ip_tables related modules
- AirGate2000C Wireless support
This kernel works for C3100 and C3200 using uboot.
Check: http://yonggun.tistory.com/60 (http://yonggun.tistory.com/60)
-------------------------------------
I want to build the kernel without uboot for C3000. Can someone tell me how to make the kernel of zImage.bin like angstrom. I built zImage and changed the file name to zImage.bin. Then I tried to install it but it failed.
-
Will there be a version like these?
kernel.img-2.6.22.9-yonggun-eabi-mmcblk0p2
kernel.img-2.6.22.9-yonggun-eabi-mmcblk0p1
ie one that would work with the C1000 like the ones mentioned?
-
Will there be a version like these?
kernel.img-2.6.22.9-yonggun-eabi-mmcblk0p2
kernel.img-2.6.22.9-yonggun-eabi-mmcblk0p1
ie one that would work with the C1000 like the ones mentioned?
"kernel.img-2.6.22.9-yonggun-eabi-mmcblk0p"1 is for C1000 on SD.
-
So too is mmcblk0p2, which loads from the second partition on the SD card. Mmcblk0p1 is for the SD first partition. I have tested both on my C1k with success. I use the mmcblk0p2 atm because it works WONDERFULLY with reinstalling u-boot. I have a small 64 mb partition on mmcblk0p1 (1st partition) and the rootfs on mmcblk0p2 (2nd partition). So atm I do not need two sd cards to upgrade uboot with. Just looking for a sd version of your newer kernel, heard the mouse twitch is virtually gone on it.
-
hello,
i want to thank you very much, 2or0, for having heard my request about ip_tables modules. I'll install it saturday (or tomorrow night). If you haven't tested yet, i'll let you know if everything is fine.
once again, thank you !
-
Hey, my 3200 has also just put it on! Will test it from now on and report issues here.
THANKS!
-
So too is mmcblk0p2, which loads from the second partition on the SD card. Mmcblk0p1 is for the SD first partition. I have tested both on my C1k with success. I use the mmcblk0p2 atm because it works WONDERFULLY with reinstalling u-boot. I have a small 64 mb partition on mmcblk0p1 (1st partition) and the rootfs on mmcblk0p2 (2nd partition). So atm I do not need two sd cards to upgrade uboot with. Just looking for a sd version of your newer kernel, heard the mouse twitch is virtually gone on it.
Yes. If you make mmcblk0p1 as vfat, then you can read and write the SD card on MS Windows series. This is the reason why I built the kernel for mmcblk0p2.
-
Indeed and thats VERY cool, just interested in seeing a;
kernel.img.2.6.23.9-yonggun-eabi-mmcblk0p2
kernel.img.2.6.23.9-yonggun-eabi-mmcblk0p1
Btw Thanks for making these kernels I know it can be a pain
-
And it will be super cool to have a yonggun kernel for the Cxx0 series as well.
My 860 doesn't mind testing and crashing because it's now resting in doggish peace.
-
Indeed and thats VERY cool, just interested in seeing a;
kernel.img.2.6.23.9-yonggun-eabi-mmcblk0p2
kernel.img.2.6.23.9-yonggun-eabi-mmcblk0p1
Btw Thanks for making these kernels I know it can be a pain
I am not sure that 2.6.23.9 works on C1000. If you can be a volunteer, I will build the kernels.
And it will be super cool to have a yonggun kernel for the Cxx0 series as well.
My 860 doesn't mind testing and crashing because it's now resting in doggish peace.
Ok, I will try to build it for Cxx0. This weekend I will do it and send it to you.
-
Q18 of installation
excuse me to ask it, but on the wiki, it isn't quite clear...
7.2 : install kernel with : kernel.img (find on yonggun site) + autoboot.sh
at the end, upgrade kernel : use kernel.img (yonggun) + updater.sh
so, to pass from 2.6.23.1-yonggun to 2.6.23.9-yonggun, do i need "autoboot.sh", or "upgrader.sh" put on the SD with the new "kernel.img", before launching u-boot, and tell him to flash the kernel (only the kernel, not a new total install)...
-
I am certainly willing to be a guinea pig
-
Q18 of installation
excuse me to ask it, but on the wiki, it isn't quite clear...
7.2 : install kernel with : kernel.img (find on yonggun site) + autoboot.sh
at the end, upgrade kernel : use kernel.img (yonggun) + updater.sh
so, to pass from 2.6.23.1-yonggun to 2.6.23.9-yonggun, do i need "autoboot.sh", or "upgrader.sh" put on the SD with the new "kernel.img", before launching u-boot, and tell him to flash the kernel (only the kernel, not a new total install)...
You need autoboot.sh if you want to upgrade the kernel using uboot.
-
ok, thanks i'll let you know tomorrow about iptables and some tests
-
One issue:
I got random internal compiler error after overclocking (624mhz). Just run make again and the process will continue. Things still build well. IIRC this does not only happen to this kernel but also in pdaXrom before (in my experience).
-
One issue:
I got random internal compiler error after overclocking (624mhz). Just run make again and the process will continue. Things still build well. IIRC this does not only happen to this kernel but also in pdaXrom before (in my experience).
I got the same error but I don't know the reason.
-
2or0, the iptables seems to work well, didn't try to NAT for the moment... if problems, i'll tell you, but all seems ok. Thanks !
-
2or0, the iptables seems to work well, didn't try to NAT for the moment... if problems, i'll tell you, but all seems ok. Thanks !
Thank you for your feedback.
-
@ 2or0 :
The NAT fonction works perfectly too. sorry for the 2 weeks before telling you it, i had lots of work... Thank you
-
Thank you for your work!
- patched with angstrom and cpufreq
- Patch the frequency scaling bug - touchscreen freezing
Where I can get this patches?
-
Thank you for your work!
- patched with angstrom and cpufreq
- Patch the frequency scaling bug - touchscreen freezing
Where I can get this patches?
Check here:
http://www.bigbridgezau.sakura.ne.jp/dev/patch/OpenZaurus/ (http://www.bigbridgezau.sakura.ne.jp/dev/patch/OpenZaurus/)