OESF Portables Forum

Everything Else => Zaurus Distro Support and Discussion => Distros, Development, and Model Specific Forums => Archived Forums => Debian => Topic started by: WolfpacK on April 03, 2008, 12:38:37 pm

Title: Debain Eabi On C7x0 With Angstrom 2.6.24 Kernel
Post by: WolfpacK on April 03, 2008, 12:38:37 pm

I have been trying to get debain working on my c860 with the new angstrom kernel (2.6.24) but had no luck   . When I try to boot from SD card in the altboot menu, it always freezes at the "Calling INIT" line after  mounting the sd card.
Has anybody been able to boot debain eabi with the new kernel on the c860? I also tried following the directions on an older post (https://www.oesf.org/forum/index.php?showtopic=25399) on booting with the 2.6.23 kernel but had no luck as well.

Any help would be appreciated. Oh, I am using the 071201 rootfs tarball for debian.

Thanks.

Title: Debain Eabi On C7x0 With Angstrom 2.6.24 Kernel
Post by: born2wonder on April 03, 2008, 02:11:23 pm

Quote from: WolfpacK

I have been trying to get debain working on my c860 with the new angstrom kernel (2.6.24) but had no luck

AFAIK, yongguns 2.6.24 works only on CK series not c860

Title: Debain Eabi On C7x0 With Angstrom 2.6.24 Kernel
Post by: Chero on April 03, 2008, 02:36:09 pm

Quote from: WolfpacK

I have been trying to get debain working on my c860 with the new angstrom kernel (2.6.24) but had no luck   . When I try to boot from SD card in the altboot menu, it always freezes at the "Calling INIT" line after  mounting the sd card.
Has anybody been able to boot debain eabi with the new kernel on the c860? I also tried following the directions on an older post (https://www.oesf.org/forum/index.php?showtopic=25399) on booting with the 2.6.23 kernel but had no luck as well.

Any help would be appreciated. Oh, I am using the 071201 rootfs tarball for debian.

Thanks.

As far as I recall altboot is broken in kernels after 2.6.21.
Try getting 2.6.21 or check the angstrom mailing lists for more recent info.

Good luck,
Chero.

Title: Debain Eabi On C7x0 With Angstrom 2.6.24 Kernel
Post by: ZDevil on April 03, 2008, 03:04:28 pm

That's true. Perhaps a solution for now, if you want to keep kernel >2.6.21 and dualboot, is not to use altboot at all, but to use an appropriate kernel (yonggun or angstrom or poky) to boot up Debian as the main system, and then kexec the other angstrom kernel to boot up the subsystem on NAND, like what's done in this thread: https://www.oesf.org/forum/index.php?showtopic=25555 (https://www.oesf.org/forum/index.php?showtopic=25555)
And you should check out/file bug reports in the Angstrom bugtracker, because the devs there will ignore any issue or complaint made outside their bugtracker.

Title: Debain Eabi On C7x0 With Angstrom 2.6.24 Kernel
Post by: WolfpacK on April 05, 2008, 06:37:57 pm

Thanks ZDevil, i'll try booting debian directly following the method in that thread. I was also wondering do u have any idea on where I can grab the 2.6.21 angstrom kernel as it doesn't seem to be hosted on the angstrom site anymore   .

Title: Debain Eabi On C7x0 With Angstrom 2.6.24 Kernel
Post by: ZDevil on April 06, 2008, 02:05:31 am

Quote from: WolfpacK

Thanks ZDevil, i'll try booting debian directly following the method in that thread. I was also wondering do u have any idea on where I can grab the 2.6.21 angstrom kernel as it doesn't seem to be hosted on the angstrom site anymore   .

Here you go.
 [ You are not allowed to view attachments ]  (kernel 2.6.21 + kernel modules)

Title: Debain Eabi On C7x0 With Angstrom 2.6.24 Kernel
Post by: henrysviper on April 13, 2008, 03:27:42 pm

Quote from: WolfpacK

I have been trying to get debain working on my c860 with the new angstrom kernel (2.6.24) but had no luck   . When I try to boot from SD card in the altboot menu, it always freezes at the "Calling INIT" line after  mounting the sd card.
Has anybody been able to boot debain eabi with the new kernel on the c860? I also tried following the directions on an older post (https://www.oesf.org/forum/index.php?showtopic=25399) on booting with the 2.6.23 kernel but had no luck as well.

FWIW the new 2.6.24 kernel and altboot from Angstrom (latest r13 stable image) work very well on my C750.
If neither 2.6.24 nor 2.6.23 with the workarounds from the other thread work for you, there may be a problem with your rootfs.
Try a rootfs from Angstrom (e.g. from here (http://http://www.angstrom-distribution.org/unstable/autobuild/c7x0/)) to see if this is the case.

Title: Debain Eabi On C7x0 With Angstrom 2.6.24 Kernel
Post by: danr on April 15, 2008, 03:56:42 am

I had a quick go with the Angstrom 2.6.24 kernel on my C860.  Generally it seemed to work well, but Windows considered the Zaurus to be an unrecognised USB device.  Does it require me to re-install the drivers on Windows?

Title: Debain Eabi On C7x0 With Angstrom 2.6.24 Kernel
Post by: kibymo on May 26, 2008, 06:24:31 am

hi danr :
I used r13 and have the same problem like you said, so I changed to r15 it seems work fine,
but my desktop is also Debian, you can try r15 on XP !!  
http://www.angstrom-distribution.org/unsta...-installkit.tgz (http://www.angstrom-distribution.org/unstable/autobuild/c7x0/Angstrom-altboot-console-image-glibc-ipk-2007.12-r15-c7x0-installkit.tgz)

--------------------
SL-C860 running Debian EABI on top of Angstrom 2.6.24 kernel