OESF Portables Forum

Everything Else => General Support and Discussion => Zaurus General Forums => Archived Forums => Security and Networking => Topic started by: snufkin on April 14, 2004, 12:43:26 am

Title: WIN-XP PPP Connection Using BT
Post by: snufkin on April 14, 2004, 12:43:26 am

I used to connect to my win-xp pc from my C760 via BT (using dialup ppp).  After upgrading to cacko rom 1.21, I found that I cannot connect to my PC using BT anymore.  However, I can connect to my mobile phone quite happily.

Thus, I suspect the problem is in the connect script in /etc/ppp/peers.  This is my script:

Code: [Select]

/dev/rfcomm1

460800

user "Guest"

connect "usr/sbin/chat -v -f /etc/ppp/chatscripts/WINXP-CLIENT"

defaultroute

usepeerdns

192.168.129.201:192.168.129.1

and my WINXP-CLIENT

Code: [Select]

TIMEOUT 15

"" "CLIENTCLIENTc"

"SERVER" "SERVER"

From the /tmp/bluetooth-pppd-log, it showed \"connect script failed\".

I\'ve scratched my head and searched for many posts already.  

Title: WIN-XP PPP Connection Using BT
Post by: tumnus on April 14, 2004, 03:21:52 am

Try running this as root as see what it gives:

pppd call /etc/ppp/peers/BT-WINXP debug -detach

Title: WIN-XP PPP Connection Using BT
Post by: snufkin on April 14, 2004, 04:09:24 am

Quote

Try running this as root as see what it gives:

pppd call /etc/ppp/peers/BT-WINXP debug -detach

connect script failed

 

Moreover, this is the \"modem\" (direct serial) log from my PC:

Code: [Select]

04-14-2004 15:55:17.628 - Session Statistics:

04-14-2004 15:55:17.628 -                Reads : 0 bytes

04-14-2004 15:55:17.628 -                Writes: 0 bytes

04-14-2004 15:56:29.627 - File: C:WINDOWSSystem32tapisrv.dll, Version 5.1.2600  

04-14-2004 15:56:29.647 - File: C:WINDOWSSystem32unimdm.tsp, Version 5.1.2600  

04-14-2004 15:56:29.647 - File: C:WINDOWSSystem32unimdmat.dll, Version 5.1.2600  

04-14-2004 15:56:29.647 - File: C:WINDOWSSystem32uniplat.dll, Version 5.1.2600  

04-14-2004 15:56:29.667 - File: C:WINDOWSSystem32driversmodem.sys, Version 5.1.2600  

04-14-2004 15:56:29.667 - File: C:WINDOWSSystem32modemui.dll, Version 5.1.2600  

04-14-2004 15:56:29.667 - File: C:WINDOWSSystem32mdminst.dll, Version 5.1.2600  

04-14-2004 15:56:29.667 - Modem type: Communications cable between two computers

04-14-2004 15:56:29.667 - Modem inf path: mdmhayes.inf

04-14-2004 15:56:29.667 - Modem inf section: M2700

04-14-2004 15:56:29.667 - Matching hardware ID: pnpc031

04-14-2004 15:56:29.667 - Opening Modem

04-14-2004 15:56:29.667 - 115200,8,N,1, ctsfl=1, rtsctl=2

04-14-2004 15:56:29.667 - Initializing modem.

04-14-2004 15:56:29.667 - Waiting for a call.

04-14-2004 15:59:27.955 - Recv: CLIENT

04-14-2004 15:59:27.955 - Interpreted response: Ring

04-14-2004 15:59:27.985 - TSP(0000): LINEEVENT: LINE_NEWCALL

04-14-2004 15:59:27.995 - TSP(0000): LINEEVENT: LINECALLSTATE_OFFERING

04-14-2004 15:59:27.995 - TSP(0000): LINEEVENT: LINEDEVSTATE_RINGING(0x1)

04-14-2004 15:59:40.003 - TSP(0000): LINEEVENT: LINECALLSTATE_IDLE

04-14-2004 15:59:40.003 - TSP(0000): Closing Call

04-14-2004 16:02:51.708 - TSP(0000): Making Call

04-14-2004 16:02:51.708 - Passthrough On

04-14-2004 16:02:51.708 - TSP Completing Async Operation(0x00010155) Status 0x00000000

04-14-2004 16:02:51.708 - TSP(0000): LINEEVENT: LINECALLSTATE_CONNECTED

04-14-2004 16:02:51.758 - TSP(0000): Dropping Call

04-14-2004 16:02:51.758 - Passthrough Off

04-14-2004 16:02:51.758 - 115200,8,N,1, ctsfl=1, rtsctl=2

04-14-2004 16:02:51.758 - Initializing modem.

04-14-2004 16:02:51.758 - Waiting for a call.

04-14-2004 16:02:51.758 - TSP(0000): LINEEVENT: LINECALLSTATE_DISCONNECTED(0x1)

04-14-2004 16:02:51.758 - TSP(0000): LINEEVENT: LINECALLSTATE_IDLE

04-14-2004 16:02:51.758 - TSP Completing Async Operation(0x00010122) Status 0x00000000

04-14-2004 16:02:51.758 - TSP(0000): Closing Call

It seems the PC cannot answer the incoming call.....

Title: WIN-XP PPP Connection Using BT
Post by: tumnus on April 14, 2004, 04:31:04 am

Not sure whether it\'s important, but I have 7 spaces between the \"\" and \"CLIENTCLIENTc\" on the second line of my chat script.

Title: WIN-XP PPP Connection Using BT
Post by: snufkin on April 14, 2004, 05:35:27 am

tried it but still same problem....connect script failed

What\'s the change from the original bluez package to the new stack in cacko v1.21?  I managed to connect in previous version of bluez package

Title: WIN-XP PPP Connection Using BT
Post by: tumnus on April 14, 2004, 06:02:08 am

I haven\'t had anything to do with the BlueZ implementation in the Cacko ROMs, but I think there have been other reports of ppp problems with the Cacko ROMs. You could try searching the forums for it.