OESF Portables Forum
Everything Else => Desktop Operating Systems Issues => Zaurus General Forums => Archived Forums => Windows Issues => Topic started by: atomiser on November 04, 2003, 08:16:11 am
-
righty, i managed to get a z in the end.
just installed the intellisync software so i can sync with outlook - then as it instructed - let it install the usb drivers n stuff.
i have setup intellisync to do everything bar email.
now, i havent setup the \"network\" in the z cus i presumed this was for if you have a cf lan card or wireless card.
if i go to the pc link program on the z it is set to use usb - i/o (default) and greyed out at the top it has hostname / ip address.
now from my pc - (i havent changed the network connection that installing the z creates - thus it has no ip address) i can \"ping\" the greyed out ip address off the z...
if i give the network connection on my pc that the z created an up address in the same subnet as the z\'s default one i can stll \"ping\" it.
in the intellisync software the communications are set to usb and the ip address is correct.
now heres the problem - if i use the \"sync\" from intellisync from my pc, nowt happens - just says place the z in the cradle and press ok. goes greyed out about 10 secs later it comes back sayin place in cradle and press ok.
if i use the sync start on the z in the pc link bit - it comes up with a communication screen with a cancel button on it. left it on there for over 2 mins - nuthing.
if i press the sync button on the cradle, same screen comes up - but nothing happens!
have i missed summin somewhere? cheers.
-
fixed it!!!!!!!
-
How did you fix it?
-
:?: I would like to know how you fixed this, too. I am having the same problem. :?:
-
any resolution here? There are many of us searching for this answer!
-
So I\'m not alone....
I\'ve tried sync from Palm and Outlook, W2K & WinMe without luck. :cry:
Hamilton
-
Well how did you fix it!!! Man I hate when they do that
-
I actually had the incorrect software versions. I was using old sync software with a new ROM.
Once I matched the two up - I have had no problems whatsoever. And thats even with a few re-installs of XP. Just seems to work flawlessly.
I have just ordered a Wireless CF card for it, however, to match up with my new Wireless router. That should be fun! Hopefully that should eradicate the need for the cradle - and also make \'net access nice and simple.
Post specific problems - and I\'ll try and help if I can - but as I say, as soon as I matched the sync software with the ROM software - it has worked beautifully!
-
Note: I\'m using rom 3.13 with the 3.13 software...
I actually had the incorrect software versions. I was using old sync software with a new ROM.
Once I matched the two up - I have had no problems whatsoever. And thats even with a few re-installs of XP. Just seems to work flawlessly.
okay, I have a fix for some of the problems folk have seen. Having had the same problems as everyone else on this thread, I\'ve re-installed everything on the Windows side (XP Pro / Outlook XP). Same problem still...
BUT, I can get it to work partially - syncing of contacts works. I discovered by accident that the sync only fails when I have the sync of calendars selected. I can select Contacts, Todos and Notes and the Sync works!!
Also, in the log file I found on the PC in the (in C:Program FilesSharp Zaurus 2Intellisync for ZaurusPtTrace.log) I see this:
Wed Apr 07 16:47:20 2004 -- Pumatech Intellisync Log File --
16:47:20.674: Begin ILX Session, Source=Microsoft Outlook, Target=Zaurus
16:47:23.488:
16:47:23.503: Starting Standard Sync
16:47:23.597: Phase=10, User=ILDATA: Reading data from Zaurus Calendar
Wed Apr 07 16:47:35 2004: Error 0x387.903.4107 at D:VcproEng3_Bug001IsIS4WEBAcmeTranslatorDCSXlatorDataApi.cpp line 782
Wed Apr 07 16:47:35 2004: Error 0xffffffff.-1.4107 at D:VcproEng3_Bug001IsIS4WEBAcmeTranslatorConnector.cpp line 508
Wed Apr 07 16:47:35 2004: Error 4107.4107 at D:MAV1039.134coresync_sdkilsdksdk_data.cpp line 657
Wed Apr 07 16:47:35 2004: Error 0.4107 at D:MAV1039.134corexlator_libsilxtransCILTRANS.CPP line 232
Wed Apr 07 16:47:35 2004: Error 4107.4107 at D:MAV1039.134coresync_sdkilsdkIlx_sdk.cpp line 191
16:47:35.226: Translation Unit Status: User=ILDATA, rc=87, Phase=10, TrErr=4107, SysErr=0 at D:MAV1039.134coreengineilx_v3XLATEV3.cpp line 488
Wed Apr 07 16:47:35 2004: Error 87.87 at D:MAV1039.134coreenginexlateXLATE.CPP line 2936
Wed Apr 07 16:47:35 2004: Error 87.87 at D:MAV1039.134coreenginexlateXLATE.CPP line 2672
Wed Apr 07 16:47:35 2004: Error 87.87 at D:MAV1039.134coreenginexlateXLATE.CPP line 2311
Wed Apr 07 16:47:35 2004: Error 87.87 at D:MAV1039.134coreenginexlateXLATE.CPP line 3369
16:47:35.273:
16:47:35.288: End ILX Session, elapsed time = 14.599 seconds
Right I think - time to clear everything down on the Zaurus side:
cd /home/zaurus/Applications/dtm
rm -rf *
Problem: Now Calendar and Contacts are bust on the Zaurus - they exit when you try to create a new item.
Solution: Reboot. Blank set of files get created in the dtm directory. Contacts and Calendar working again.
Still get the API problem though. Log file looks a bit different though. Looks like it might be a problem with Outlook XP now though:
18:40:33.861: Phase=10, User=ILDATA: Reading data from Zaurus Calendar
18:40:36.502: Finished Reading 0 Records + 0 Deletes + 0 Unchangeds for User=ILDATA from Zaurus Calendar (slow sync input for resync)
18:40:36.518: Phase=20, User=ILDATA: Reading data from Microsoft Outlook Calendar
Wed Apr 07 18:40:38 2004: Error BODY.2005 at D:MAV1039.134devilxolk2olkapipumapi_getfield.cpp line 429
Wed Apr 07 18:40:38 2004: Error 0x8004011b.-2147221221.30064 at D:MAV1039.134devilxolk2olkapipumapi_getfield.cpp line 430
Wed Apr 07 18:40:38 2004: Error 2005_BODY.30064.30016 at D:MAV1039.134devilxolk2olk_Export.cpp line 679
Next stop pumatech...
-
Also, in C:Program FilesSharp Zaurus 2Intellisync for ZaurusILDATAIS4SL.log:
You can see that it has read items from my Outlook calendar, but it ends:
Internal Error #4238.
Translation Canceled!
I wonder if the problem is the lack of support for Outlook XP/2002 in this version of Intellisync? Is this a common factor in everyone\'s problems?