OESF Portables Forum
Everything Else => Sharp Zaurus => Model Specific Forums => Distros, Development, and Model Specific Forums => Archived Forums => 6000 - Tosa => Topic started by: cradlinski on May 07, 2004, 04:31:43 pm
-
Can anyone recommend a good belt-clip carrying case for the SL-6000?
-
Great question! I\'ve been using an old iPaq case, but it\'s not a great fit. Hopefully someone else will have a good suggestion.
-
I\'ve also been looking, I don\'t think there\'s anything out for it just yet, until then I\'ve been carrying it in my shirt pocket.
-
All of the large universal carrying cases I\'ve found top out at around 5.5\".
-
I\'ve been using an old iPaq case.
For which iPaq?
-
I bought a Sumdex HDP-165BK at Micro Center. It was around $25. I was amazed at the fit. More than big enough for the SL-6000, with about a half-inch to spare. It has plenty of pockets, credit card slots, etc. A couple outside pockets could easily hold compactflash cards. You can attach velcro to the back of the Zaurus to have it permanently attached, but I\'ve left it loose for now. I\'ve used Sumdex cases before and they hold up well. I wouldn\'t mind one without the outside pockets so it would be a bit less bulky, but this model is worth checking out.
-
I use the case that came with my original 3650. It holds the Zaurus (or just about any other PDA) because it has a long velcroed flap that loops over the top. It\'s been a good all-purpose case, I\'ve used it with about 5 PDAs so far...
-
PDA Pivot (http://pdapivot.com/features.html) looks like it could be something to uses with a 6000. Though when I think about how hard I ahve been on every holster I have owned from my Visors/Treos I wonder how well this would work. But then again I have always ended up redesigning and rebuilding every holster I have owned for a PDA. Though this might be my startedin point for my 6000.
-
The other holster I am looking at for my 6000 would be the e-holster (http://www.eholster.com/e-holster/index.html). Though I am not sure if I really need something like this since I am usually at a desk all day. Now if I was still wearing a suit and always walking about I think this would be a great wayt o hide all of my electronics. Also I like the idea of being able to reach in and take out my PDA like I was a gangster in an old thirty style more....
[ You are not allowed to view attachments ]
-
:shock: Wow! That is the nerdiest thing I\'ve ever seen...
-
I AGREE.Can you imagime taking off all that gear before putting on a seat belt.
-
Hi, the nutshell company (http://www.tuff-as-nuts.com/Products.htm) in New Zeland has a great variety of cases and one should fit the sl-6000. They give you all the dimensions. If you find one that fits let me know what you think.
-
The other holster I am looking at for my 6000 would be the e-holster (http://www.eholster.com/e-holster/index.html). Though I am not sure if I really need something like this since I am usually at a desk all day. Now if I was still wearing a suit and always walking about I think this would be a great wayt o hide all of my electronics. Also I like the idea of being able to reach in and take out my PDA like I was a gangster in an old thirty style more....
[ You are not allowed to view attachments ]
Plus, you can have a lot of fun at airports
-
I'm scared to take my Z outside of the house without a case, but can't seem to find anything for it yet. There was another thread here about a case in development, but apparently it didn't pan out. The closest thing I have found is for the 5500:
http://www.pielframa.com/Sharp.Zaurus.htm (http://www.pielframa.com/Sharp.Zaurus.htm)
I'm thinking the 6000 is too big to fit in this? I do like this design because of the belt clip (required) and the bottom is open so you can use the keyboard while keeping it in the case. Has anyone else seen a case designed for the 6000 or have a universal PDA case with a belt clip/loop that works with the 6000?
-
The Pelican 1040 Micro case fits pretty well, and only costs about $16USD (with the pick and pluck foam). It can be found in many places, is waterproof, crushproof and dustproof. Kind of bulky but you don't have to worry about your Z while it's in it providing you add a bit of foam to keep the Z from moving around in the case. I bought mine here
http://www.meiresearch.com/product_detail-3977.asp (http://www.meiresearch.com/product_detail-3977.asp)
Before buying one of the Pelicans I bought one of these and added some foam to surround my Z in it. It is much less bulky but the latch is not very secure and the case itself is not waterproof, dustproof or as solid as the Pelican. Nice case though.
http://www.brookstone.com/shop/product.asp...words=moneyclip (http://www.brookstone.com/shop/product.asp?product_code=423913&search_type=search&search_words=moneyclip)
Good luck,
gdog
-
I bought a RhinoSkin 3000. Bad choice. It doesn't fit well and there's no padding. The Pelican looks much better.
Chris
-
The SL-6000 is 6.2" x3.2" x 0.8". I've found a few cases online that will hold a PDA this size, but none of them are ideal. I haven't tried any of them yet, but according to the listed dimensions on each, the Zaurus should fit...though you may not be able to use the keypad while its encased.
The nicest looking case I've seen is the Futura-100. The site says it holds PDAs that are 7.6" x 5.4" x 1.75" or smaller. $64.95 @ http://www.ebcases.com/Detail.bok?no=3013 (http://www.ebcases.com/Detail.bok?no=3013)
The Aquapac Waterproof PDA Case Plus is pretty much a plastic bag that will keep the Zaurus free from water, dust, and scratching, but not from crushing. $29.99 @ http://www.waterproofcases.net/365.html (http://www.waterproofcases.net/365.html)
I want to try the Heavy Armor 3600 Waterproof PDA Case. It's big and ugly like the Pelican cases and expensive to boot, but is waterproof, dustproof, and drop resistant. Plus, it has lots of accessories for protecting any peripherals and various methods of attaching it to your person. Its internal dimensions are 6.75" x 3.6" x 1.125" and there's a deep box that should accomodate the expansion pack as well. I'm not sure how well the Z's screen and buttons will align with the viewing area. $89.97 @ http://www.watertightcase.com/3600series.html (http://www.watertightcase.com/3600series.html)
But pretty slim pickings overall.
-
My solution to a case, which I also used with my 5500, is to get a Daytimer cover, remove all the crap inside it, and use it for my case. I have no idea what the model number is on the one I found for my 6000, I just tried all the ones Fry's had til I found one that fit well enough, and didn't come with the 3-ring metal gizmo in it. The one I settled with measures 7 1/2" x 4 3/8" x 1 5/8". It zips closed, and holds all my credit cards, etc, and has some room for money, but after buying a 6000, that shouldn't be a problem...
They're not really padded, but the leather (black, very nice) is just bulky enough to provide enough protection from drops & the like. I have a slightly smaller version for my 5500, which I've inadvertantly dropped, thrown, kicked etc, and the case protected the 5500 well.
And...the thing only set me back $25...
-
This (http://www.targus.com/us/product_details.asp?sku=PDAT05) is what I use, a Targus neoprene case. Granted, I use it for a 5600, but there is room inside for business cards, and a handy little strap to also hold my CF card.
HTH.
R.
==
EDIT: Actually, I just took a look at the size, and the SL6000 would be just slightly too big for this case.
-
I am using a pouch made by Jansport. It is not very pritty, but it works. However I am looking for something else, but it is fine for the time being.
lek.
-
I just went today at the outdoor sports store. I was remembering they were having the Heavy Armor and I was curious to look at it. The first time I saw it, I haven't received my Z, so, I didn't pay much attention to it. Unfortunately, they just moved out the summer stuff (the waterproof cases were with the canoes and kayaks) and they just keep the Pelican's in the store.
However, I can confirm the Pelican 1040 is fitting almost perfectly the dimensions of the Z 6000, except the thickness. So, just a slim piece of foam will be enough to correct this. The problem with such a case is the Z is almost unusable while inside. The Heavy Armor is trying to keep it usable. That's what I tried to validate...
IMO, the best choice for those planning to bring their Z while outdoor, would be a case which permit the use of the Zaurus without having to remove it from the case, even if it's limited usage. The Pelican doesn't fit this requirement, but it protect the Zaurus pretty well. So, it would be my second choice.
If someone is having a Heavy Armor, it would be interesting if he/she can share it's experience with it.
-
I know for a fact that the 2000 won't fit a sl-6000. Fits my iPaq though. The new heavy armour should fit, don't have the extra money to find out.
-
I got my SL-6000L yesterday and found out it fits perfectly into the leather case I used for my Psion 3c.
It is a fairly slim case, zippered and lightly padded with a large pocket on one of the inner sides. With the SL-6000L inside there is just enough room left for a pen, few memory cards, even a spare battery (which I had not realized it was so thin!!)
Just to play ti safe I leave the ugly plastic screen cover on, which I remove when I use the SL-6000L for an extended period of time.
I don't know how difficult can be to find those cases these days, but it might be worth a try. A case for the 5mx (a more recent Psion machine) could be easier to find, although slightly larger.
-
I just got my 6K Monday. Now I can give up my broken down laptop.
I found a good case when I was in Target. Link here to BestBuy.
http://www.bestbuy.com/site/olspage.jsp?j=...t&ref=03&loc=01 (http://www.bestbuy.com/site/olspage.jsp?j=1&id=1051806936207&type=product&ref=03&loc=01)
It's a little bulky, but it has a nice big pocket in the back that is well padded for the Z. The front 2 pockets are large and hold my USB power ethernet switch, charger, and CF cards.
It's not perfect, but it was easy to find.
-
I need something to wear on my belt, so it is slim pickings out there. I ended up getting the Samsonite D866BK camera case. It looks like a miniature backpack, with two zippered "pockets". The large one fits the Z perfectly. The small one is handy to carry my Trendnet CF ethernet card, headphone connector, and, soon, an iRiver USB cable adapter
Like all the other non-custom cases, this one is definetely not perfect. It is made of imitation leather, the belt loop is huge, the thing is definetely ugly. But it is the smallest case I have found for belt use.
The manufacturer web site (http://www.samsonite.net) is under construction, but maybe soon it will be available. I got mine at Microcenter for $15.
-
I have just realized to have purchased a very nice case for my Zaurus 6000L
It is made by CaseLogic. I bought it from www.digitalpowerpro.com through this eBay auction: http://cgi.ebay.it/ws/eBayISAPI.dll?ViewIt...me=STRK:MEWN:IT (http://cgi.ebay.it/ws/eBayISAPI.dll?ViewItem&rd=1&item=5724070710&ssPageName=STRK:MEWN:IT)
It costed to me $ 4.95 + $ 10.00 for the shipping, it fits the Zaurus perfectly, the width is OK, the height is OK, but the zipper height is just a few millimeters shorter than the Zaurus, but you don't have problems to close it inside, pulling just a little bit.
The exact dimensions are: 6.37"L x 4"W x 1.25"D approximately 162mm L x 101mm W x 32mm D.
If you don't care to close the Zaurus together with CF cards sticking out of it, I think it's currently one of the best solutions. But please be care that you will have space for only the Zaurus inside this case, maybe a small piece of paper, a credit card or an additional SD card, nothing more.
I was only interested to let other people know of this case solution, because it was rather difficult for me to find a good one before. I am in no way affiliated either with CaseLogic or with the mentioned eBay store.
-
I finly went to the local shoe repair shop and had them make a simple leather pouch for my Z6K. It only fits the Z6K, but that is what I needed. It has a belt loop and works just fine. It cost me $15.00 I do also have a small Jansport pouch which serves when I need more room.
lek
-
I'm using a Magellan GPS case. it is padded, the device fits in nicely, though the case is a bit longer then the SL-6000. Look at:
REI (http://www.rei.com/online/store/ProductDisplay?storeId=8000&catalogId=40000008000&productId=12150019&parent_category_rn=4500599&vcat=REI_SEARCH)
-
The NiteIze pda case works pretty well.
[ You are not allowed to view attachments ]
-
hey, that looks pretty good.
I don't suppose the sharp serial port is accessible while it's in the case, is it? and you have to take the unit out to otherwise view the screen, right?
thanks and any other photos would be cool to preview as well.
p.s. nice desk.. nice and cluttered just like mine
-
Yea, it's more of a holster than "ues it in there" type case. I don't have a setrial cable, but if it's anything like the iPaq cables it should work with this case. All the ports are accessable.
[ You are not allowed to view attachments ]
P.S. Nothing beats a door as a desk top!
-
I have just realized to have purchased a very nice case for my Zaurus 6000L
It is made by CaseLogic. I bought it from www.digitalpowerpro.com through this eBay auction: http://cgi.ebay.it/ws/eBayISAPI.dll?ViewIt...me=STRK:MEWN:IT (http://cgi.ebay.it/ws/eBayISAPI.dll?ViewItem&rd=1&item=5724070710&ssPageName=STRK:MEWN:IT)
It costed to me $ 4.95 + $ 10.00 for the shipping, it fits the Zaurus perfectly, the width is OK, the height is OK, but the zipper height is just a few millimeters shorter than the Zaurus, but you don't have problems to close it inside, pulling just a little bit.
The exact dimensions are: 6.37"L x 4"W x 1.25"D approximately 162mm L x 101mm W x 32mm D.
If you don't care to close the Zaurus together with CF cards sticking out of it, I think it's currently one of the best solutions. But please be care that you will have space for only the Zaurus inside this case, maybe a small piece of paper, a credit card or an additional SD card, nothing more.
I was only interested to let other people know of this case solution, because it was rather difficult for me to find a good one before. I am in no way affiliated either with CaseLogic or with the mentioned eBay store.
I have one Caselogic plt2 - it doesn't fit at all. It's not a problem of a couple of millimeters - if you close the zip you scatch the Z.
And the plastic holder won't hold the Z. Too big. Not a good case at all.
-
Yea, it's more of a holster than "ues it in there" type case. I don't have a setrial cable, but if it's anything like the iPaq cables it should work with this case. All the ports are accessable.
oh. I see. It wasn't as immediately clear from the first photo that the "bottom" was a couple of straps. It appeared as though there was perhaps some black fabric in between there, which would obscure the serial port, but now I see that is the back of the z6k.
I have a Serial I/O cable and it looks like it would attach without interference.
it also appears as though there might be enough room/stretch to fit the Z even if it had the expansion pack (I don't have one, but I am considering getting one so I can take fullest advantage... maybe the price will come down a little first).
If it's not trouble for you, could you also post a photo of the top of the case, similar to the second shot you posted of the bottom? Curious how accessible the SD and CF slot(s) are with it all closed up (say for a wired network card).
The reason I'm asking about all this stuff is that I often just plop the Z on my desk at then hook up to it with SSH or VNC. If I could leave it in the case and just connect some wires, that would be most ideal (short of also being able to use it while still in the case, but you can't have everything now, can you?).
thanks again.
-
I sit it in backwards because the back of the case has a metal instert. Figured on a little extra protection for the screen. I had to replace the screen on my iPaq last year, p.i.t.a. It took three months to get the screen from foxconn, only took 20 minuts to replace though.
You won't be able to use a wired cf card with the case closed, the flap does cover the cf and sd cards.
[ You are not allowed to view attachments ]
-
It might need some minor modification to the velcro to fit with the expansion adapter. It has to be attached crooked now to fit, with the adapter? It will fit the "super guppy" iPaq and dual pcmcia card sleeve.
[ You are not allowed to view attachments ]
-
anyone have experience with the following as a possible 6000 case?
Bucket Boss® PDA Holster
http://www.bucketboss.com/product_detail.html?skuid=114 (http://www.bucketboss.com/product_detail.html?skuid=114)
or how about this:
http://www.extremepda.com/Merchant2/mercha...e=KRUSUNIVLARGE (http://www.extremepda.com/Merchant2/merchant.mvc?store_code=XPDA&screen=PROD&product_code=KRUSUNIVLARGE)
Hey, maybe ZUG could start a case by model page?
-
Since Ebags is having 20% off these days, I took a look at their collections
SL-6000 is 6.22 inches by 3.14 inches by .80 inches
I fount following that will fit and pretty inexpensive too..any thing over 20 is too expensive for me
7.5" x 4.5" x 1.5" for $9.59 -> should still have some spare room
http://www.ebags.com/sumdex/palm_pocket_pc...fm?modelid=6965 (http://www.ebags.com/sumdex/palm_pocket_pc_organizer/product_detail/index.cfm?modelid=6965)
6.25" x 4" x 1" for $5.59 -> tight?
http://www.ebags.com/sumdex/twill_pda_pock...m?modelid=42737 (http://www.ebags.com/sumdex/twill_pda_pocket_pda_case/product_detail/index.cfm?modelid=42737)
7* 4.5" x 1.5" for 15.99 -> elegant
http://www.ebags.com/case_logic/strongman_...m?modelid=44303 (http://www.ebags.com/case_logic/strongman_pda_case_eva/product_detail/index.cfm?modelid=44303)
7.75 * 4.25" x 1.5" for 15.99 -> kinda long but should be would with CF card attached
http://www.ebags.com/case_logic/koskin_sto...m?modelid=44299 (http://www.ebags.com/case_logic/koskin_stongman_pda_case_zippered/product_detail/index.cfm?modelid=44299)
don't know which one to try out yet . we will see
-
Can anyone recommend a good belt-clip carrying case for the SL-6000?
Hmm, I am still looking~! Any suggestions for good case for under $20?
-
Hi, the nutshell company (http://www.tuff-as-nuts.com/Products.htm) in New Zeland has a great variety of cases and one should fit the sl-6000. They give you all the dimensions. If you find one that fits let me know what you think.
I have a Nutshell case and it works great. Mine is PDA case #215. Even though the dimension of the case is shorter than the Zaurus on the spec it fits perfect. You can also customize it in many ways. Downside of this case is that it's not cheap.
-
The funny thing is, I've got the Expansion adapter, so my 6K is big And I went all over the place looking at digital camera cases and other things that might hold it well.
In the end, I had a case that fit PERFECTLY, and I mean, PERFECTLY as if it were MADE for the 6K + Expansion Adapter... can you guess what it was???
It's the binocular case that came with my Bushnell 16x32 binocs. I had bought the binoculars from Target I believe when they were on sale for about $30. The only discernable model number on the binoculars shows 13-1632.
The case isn't a clip-on case, instead you run your belt through the loop it has and it stays on you. All you do is pull open the top (closes with velcro) and pull out the Zaurus. It works... even if it isn't as cool as some other cases look.
-
Hi, the nutshell company (http://www.tuff-as-nuts.com/Products.htm) in New Zeland has a great variety of cases and one should fit the sl-6000. They give you all the dimensions. If you find one that fits let me know what you think.
I have a Nutshell case and it works great. Mine is PDA case #215. Even though the dimension of the case is shorter than the Zaurus on the spec it fits perfect. You can also customize it in many ways. Downside of this case is that it's not cheap.
Hmm, $50 + $10 (shipping), wow that's one expensive case.
-
I think people are missing a trick by not looking at cases you can get for the Gameboy Advance - they've dirt cheap, and all of 'em will fit an SL5xxx, and some fit the SL6000 as well.
I mostly use a cheapie own brand leather case from Game (used to be EB) for my SL5500:
[img]http://angela1.data-uncertain.co.uk/~zaurus/CasePhotos/leatherClosed.jpg\" border=\"0\" class=\"linked-image\" /]
[img]http://angela1.data-uncertain.co.uk/~zaurus/CasePhotos/leatherOpen1.jpg\" border=\"0\" class=\"linked-image\" /]
[img]http://angela1.data-uncertain.co.uk/~zaurus/CasePhotos/leatherOpen2.jpg\" border=\"0\" class=\"linked-image\" /]
It's a perfect fit for a SL5500, and has a pocket for your extra SD/CF/Wifi/etc. Cost about £5 (or $8 for the folks in the US).
I've also got a Gameboy Advance belt pouch/holster. I think my son bought this for me from Toy's-R-Us. It's actually a bit big for the SL5500, so the 5500 fits in with it's WIFI card still in the CF slot. But handily, with it being that bit bigger, it actually fits the SL6000 perfectly (not shown - my wife's hidden the SL6000 'coz it's my christmas present).
[img]http://angela1.data-uncertain.co.uk/~zaurus/CasePhotos/holsterClosed.jpg\" border=\"0\" class=\"linked-image\" /]
[img]http://angela1.data-uncertain.co.uk/~zaurus/CasePhotos/holsterOpen.jpg\" border=\"0\" class=\"linked-image\" /]
[img]http://angela1.data-uncertain.co.uk/~zaurus/CasePhotos/holsterBack.jpg\" border=\"0\" class=\"linked-image\" /]
Again, it's got an internal pocket for your extra SD/CF cards, and also has a belt clip (velcro'ed at on end to clip over your belt). I think it cost him about £4 ($7 ish).
The holster looks a bit battered in the photos - that's from it's time holding my GBA on various beachs around the world (Antigua, Koh Samui, Brighton...).
-
Just bought myself this one: TRAX Zippered Camera Pouch - Model: TCP-03
http://www.bestbuy.com/site/olspage.jsp?id...19&type=product (http://www.bestbuy.com/site/olspage.jsp?id=1051384081364&skuId=5215019&type=product)
My SL-6000L fits there perfectly. The pouch is actually twice thicker than Z, so if you carry additional accessories, there is place for them too.
-
Hi folks,
How do you carry your SL-6000 with you? I'll be buying online without seeing, therefore I'm wondering which case would be suitable. There are many cases for Palm and iPaq but SL6000 would not seem to fit in.
Thanks in advance.
-
There is a pinned topic in 6000 hardware, but I use thepouch from thepouch.com for my first two Zaurii and I am considering it for my 6000. They will custom make it for a perfect fit. It is neoprene and protects well from water and impact. The downside is not being to use the Z within the case and small storage space for extra cards
-
In the pinned thread that is mentioned in the above post, I found someone talking about a Sumdex pda case they purchased through www.ebags.com
The pda case fits perfectly, has plenty of room for other stuff and also carries my cell phone. It's only $12 (USD) and when I purchased mine, it came with free shipping.
http://www.ebags.com/sumdex/palm_pocket_pc...fm?modelid=6965 (http://www.ebags.com/sumdex/palm_pocket_pc_organizer/product_detail/index.cfm?modelid=6965)
HTH,
Roger
-
From the pinned topic, I got a Nite-Ize PDA "stand up" style holster. It has been working pretty good so far, fits the Zaurus okay although probably not as snug as other PDAs.
-
I use a selfmade belt attachable carying case. no room for additional stuff, no holes for cables etc. only for carrying the Z around.
[img]http://www.math.uni-klu.ac.at/~agebhard/zaurus-case.jpg\" border=\"0\" class=\"linked-image\" /]
I already used a slightly smaller but similar case for my SL-5000 (visible in the background of the image).
-
I needed a quick solution to my case problem before I went on my Christmas vacation. I went to my local Staples and found the pictured case. Its thickness perfectly fits the thickness of the zaurus. It has about an inch of spare room on the side and top (or bottom). It has nothing to secure it to the zaurus. I think it costs $24.
Lance
-
alge,
looks really nice, a couple q's:
- how is it working out for the 6K? do you think a velcro fastener would work better for easy closing?
- how long to put together?
- source of leather? cobbler, craft store, other?
J
-
alge,
looks really nice, a couple q's:
- how is it working out for the 6K?  do you think a velcro fastener would work better for easy closing?
- how long to put together?
- source of leather? cobbler, craft store, other?
J
I'll prepare a short HOWTO for this doityourself case, with some more pictures ...
It took me about three evenings. I got the leather from a local cobbler store, it is about 3mm thick.
You only need some rather strong yarn, a leather needle, a swiss army knife or similar and four! tapestry needles.
velcro fastener: dont know, may be better, but the simple loop works well.
I'm using the smaller 5000D case for almost two years now (everyday), I had only to replace the yarn one time (from cotton to synthetics).
-
as promised the HOWTO:
PDF (http://www.math.uni-klu.ac.at/~agebhard/Zaurus-SL6000-case.pdf) (large! 2MB)
gzipped Postscript (http://www.math.uni-klu.ac.at/~agebhard/Zaurus-SL6000-case.ps.gz) (very large! 20MB, ~ 40 MB unpacked)
DXF file (http://www.math.uni-klu.ac.at/~agebhard/Zaurus-SL6000-case.dxf) (for e.g. QCad)
EPS file (http://www.math.uni-klu.ac.at/~agebhard/Zaurus-SL6000-case.eps) with layout only
-
alge,
thank you for the How-To, great pictures in the documentation! I shall have to pick a weekend in the near future to put it together.
J
-
Since Ebags is having 20% off these days, I took a look at their collections
SL-6000 is 6.22 inches by 3.14 inches by .80 inches
7* 4.5" x 1.5" for 15.99 -> elegant
http://www.ebags.com/case_logic/strongman_...m?modelid=44303 (http://www.ebags.com/case_logic/strongman_pda_case_eva/product_detail/index.cfm?modelid=44303)
Be aware that this one does not hold SL-6000 because the holder is much less than the size of the bag. I just received it this afternoon and am ready to return it.
-
I wanted a minimal, unobtrusive (if that is possible with the 6000 ) holster type case to hang on my belt for use at the office. This is what I found:
Shaun Palmer Caselogic Gameboy case (http://www.casedirect.com/product_detail.asp?UID=2004100418293531&T1=CAS+XGB+20P&menu=85)
The Z sticks up about a half an inch from the top and it does expose the top corners, but I think it is about the smallest possible holster case that is usable. The Z will fit in the case with the plastic screen protector, but I really didn't like leaving it on all the time. For now, I use a Nushield screen protector and turn the Zaurus upside down and facing backwards in the case.
The best part is that I found the case for $4.90 at Frys!
-
did some one try the sony psp case !!!!!!!!!!!!!!!!!!!111
-
did I post a picture of a leather/velvet case I found that's a perfect match for the 6000 with its sled?
[ You are not allowed to view attachments ]
[ You are not allowed to view attachments ]
http://externe.net/zaurus/leather-and-velvet-case (http://externe.net/zaurus/leather-and-velvet-case) has more pics. Got it at "super casino" supermarket in Toulouse, France
-
did I post a picture of a leather/velvet case I found that's a perfect match for the 6000 with its sled?
[ You are not allowed to view attachments ]
[ You are not allowed to view attachments ]
http://externe.net/zaurus/leather-and-velvet-case (http://externe.net/zaurus/leather-and-velvet-case) has more pics. Got it at "super casino" supermarket in Toulouse, France
[div align=\"right\"][a href=\"index.php?act=findpost&pid=72469\"][{POST_SNAPBACK}][/a][/div]
I was in France last week and managed to pick up a couple of these. Best case I've seen for a sl-6000 + sled. I only need one, so would be glad to sell the extra one for what I paid (20 euros) + shipping, if anyone is interested.
I am in the US, btw.
-
I just went with the Case Logic PLTK-10, about $15 from CompUSA... it's just a "snap over the belt" style holster, and the 6k sticks out the top by about 1/2 an inch, but it's a) cheap, b ) attaches to a belt, c) fairly unobtrusive (as unobtrusive as the 6k CAN be), and d) allows easy-in easy-out, so good for occasional "grab it and go" use.
Here (http://www.compusa.com/products/product_info.asp?product_code=304230&pfp=BROWSE)
Disadvantages: no retention mechanism. The thing comes with an elastic loop on the inside that's supposed to stretch over the top of the unit and hook onto a metal hook on the back. But the 6k is far too big, so now you have a bit of elastic rubbing on the unit, and after several months there's a noticeable (although not heinous) scuff on the plastic fold-over screen protector. I may just cut the elastic off and see if that helps.
In general, though, it's working very well for $15.
-->VPutz
-
I was in France last week and managed to pick up a couple of these. Best case I've seen for a sl-6000 + sled. I only need one, so would be glad to sell the extra one for what I paid (20 euros) + shipping, if anyone is interested.
I am in the US, btw.
[div align=\"right\"][a href=\"index.php?act=findpost&pid=77035\"][{POST_SNAPBACK}][/a][/div]
Cool - someone else bought it :-)
Good looking, comfortable etc... the best there is, as if it was made for it.
-
If I haven't mentioned it previously, I use $4.00 Samsonite padded nylon camera bag that I found at Wal-Mart. It holds my 6k, a belkin kbd, a small usb hub and power supply, some cable and my tiny mouse. can be carried with a strap (it is a camera bag after all )or in my satchel. I think of it as a lilliputian laptop. The Z by itself goes in a pocket, if needed.
-
Hi,
Piel Frama (www.pielframa.com) produces beautiful cases for PDA's but at the moment they do not have a case for the sl-6000 (unfortunately). I've contacted them and asked if they have plans to start producing for this model. They would be happy to start making such a case, but they need a model of the sl-6000 for a couple of days.
So my question is, is there someone who has a dead sl-6000 which could serve as a model. And are you willing to send it to Piel Frama (Spain). It will be sent back.
(also posted at sl6000-hardware forum)
-
Hi,
Piel Frama (www.pielframa.com) produces beautiful cases for PDA's but at the moment they do not have a case for the sl-6000 (unfortunately). I've contacted them and asked if they have plans to start producing for this model. They would be happy to start making such a case, but they need a model of the sl-6000 for a couple of days.
So my question is, is there someone who has a dead sl-6000 which could serve as a model. And are you willing to send it to Piel Frama (Spain). It will be sent back.
(also posted at sl6000-general forum)
-
Hi -
Could Piel Frama use the examples that were provided by alge in this forum :
https://www.oesf.org/forums/index.php?showtopic=3941&st=45 (https://www.oesf.org/forums/index.php?showtopic=3941&st=45)
The dimensions are all cut out perfectly in alge's HOW-TO document. And if alge does not mind, maybe Piel Frama can use his specs.
I'd written to alge several times before asking if he could make me one (!) and I'd gladly pay for it but I didn't get any reply... sigh...
Just me thoughts.
crespo
Hi,
Piel Frama (www.pielframa.com) produces beautiful cases for PDA's but at the moment they do not have a case for the sl-6000 (unfortunately). I've contacted them and asked if they have plans to start producing for this model. They would be happy to start making such a case, but they need a model of the sl-6000 for a couple of days.
So my question is, is there someone who has a dead sl-6000 which could serve as a model. And are you willing to send it to Piel Frama (Spain). It will be sent back.
(also posted at sl6000-general forum)
[div align=\"right\"][a href=\"index.php?act=findpost&pid=78847\"][{POST_SNAPBACK}][/a][/div]
-
I just found a case that fits the Z very well. It's a travel case for the Sony PSP, made by Headbanger Audio (www.headbangeraudio.com). It was ~$10 at Circuit City (yuck). It's a bit snug, but has enough room for a couple of CF cards. It's well padded, seems to be well made, and is much, much less bulky than the usual camera case.
They had other (larger) cases for the PSP + accessories that would have worked also.
I can supply photos if you're interested.
Mark
-
maybe a trip to walmart's psp stuff is in order ..
-
I just found a case that fits the Z very well. It's a travel case for the Sony PSP, made by Headbanger Audio (www.headbangeraudio.com). It was ~$10 at Circuit City (yuck). It's a bit snug, but has enough room for a couple of CF cards. It's well padded, seems to be well made, and is much, much less bulky than the usual camera case.
They had other (larger) cases for the PSP + accessories that would have worked also.
I can supply photos if you're interested.
[div align=\"right\"][a href=\"index.php?act=findpost&pid=84608\"][{POST_SNAPBACK}][/a][/div]
enough room with the sled attached?
-
I just found a case that fits the Z very well. It's a travel case for the Sony PSP, made by Headbanger Audio (www.headbangeraudio.com). It was ~$10 at Circuit City (yuck). It's a bit snug, but has enough room for a couple of CF cards. It's well padded, seems to be well made, and is much, much less bulky than the usual camera case.
They had other (larger) cases for the PSP + accessories that would have worked also.
I can supply photos if you're interested.
[div align=\"right\"][a href=\"index.php?act=findpost&pid=84608\"][{POST_SNAPBACK}][/a][/div]
enough room with the sled attached?
[div align=\"right\"][a href=\"index.php?act=findpost&pid=84944\"][{POST_SNAPBACK}][/a][/div]
I don't have the sled, so I can't be sure if the larger case would fit. If the sled only adds thickness (not length or width) to the Z, then it may fit--there's about 1/2" of spare depth in the case.
Mark
-
Hi,
Well, I did not find a broken SL6000 for Piel Frame to serve as a model, so I sent my own beloved one. And guess:
I got it back and Piel Frama made the most beautiful case for me . If you want to see it, you will find on their website. Search for the SL-6000 amongst the Sharp models.
Again, it is really beautiful, and very neatly handcrafted of real leather. If you're interested go to www.pielframa.com where you can order it online.
insomniux
(PS This is no advertisement, I 'm just very happy that finally there is a company which makes a case for the sl-6000)
-
Hi,
Today I've received the prototype of the SL-6000 case by Piel Frama. It really is the most beautiful case you can imagine .
Also see my post https://www.oesf.org/forums/index.php?showtopic=12468 (https://www.oesf.org/forums/index.php?showtopic=12468) in this forum.
My warm recommenations to visit their website at www.pielframa.com .
insomniux
-
Hats off to you and cheers to you for such an act.
The case indeed does look beautiful. All Piel cases are so well made - I am lusting after the C1000 case myself. Maybe someday soon...
-
Wow that looks nice. I always thought the case for the clamshells made the clamshells look too bulky. This does not look true for the 6000. Will streamline carry it like they do the clamshell models?
-
I cannot say much about the clamshels. I know the pictures from their website, but have not seem them in reality. The case only adds a few millimeters in the height and width of the sl-6000. It indeed becomes somewhat thicker, but it does NOT look bulky at all. I have the impression that they added some extra material over the screen area, which gives better protection.
-
Please see my message on https://www.oesf.org/forums/index.php?showtopic=3941&st=60 (https://www.oesf.org/forums/index.php?showtopic=3941&st=60)
Piel Frama just started to produce the case (beautifully handcrafted). Find it under the Sharp models at www.pielframa.com
-
We will carry the case. I will work on getting the preorders up this weekend until the shipment arrives. Any color requests?
-
If I was trendy, the tan looks very nice. I'm pretty conservative with cases, so I'm leaning towards black. The cowhide of course.
-
These do look nice. Right now I use a case that zippers closed so I would worry that the open style of the PF case would allow in more grit / dirt?
It looks like you'd also need to use a screen protector with this style too or else the grit or even the SD cards would scratch the screen.
I assume that you need to remove the case in order to synch. It doesn't look like it'd fit in the 6000 docking station. How easy are they to remove?
-
If it is closed, you have to apply quite some pressure on the cover before the SD card in the pocket touches the screen. However in theory it is possible.
To remove the sl6000 you open the cover and slide the pda upward. There is no chance the device slips from the case when it is closed. Since the leathet fits quite thight around the device, chances that is slides out of the case while it is open, are small
The producer also makes screen-protectors. Don't know if they make them for the sl6000 as well.
-
I bought a Sumdex HDP-165BK at Micro Center. It was around $25. I was amazed at the fit. More than big enough for the SL-6000, with about a half-inch to spare. It has plenty of pockets, credit card slots, etc. A couple outside pockets could easily hold compactflash cards. You can attach velcro to the back of the Zaurus to have it permanently attached, but I've left it loose for now. I've used Sumdex cases before and they hold up well. I wouldn't mind one without the outside pockets so it would be a bit less bulky, but this model is worth checking out.
[div align=\"right\"][a href=\"index.php?act=findpost&pid=24824\"][{POST_SNAPBACK}][/a][/div]
I know this was a while ago ..... are you sure the brand is Sumdex, I never heard of it and cannot find it on the MicroCenter site. Thanks.