OESF Portables Forum

Everything Else => Asia User Groups => Zaurus Regional User Groups => Everything Else => Archived Forums => China => Topic started by: craigtyson on July 24, 2004, 06:18:23 am

Title: Chinese input
Post by: craigtyson on July 24, 2004, 06:18:23 am

Im having great dificulty getting any Chinese pinyin input working on my 5500 running OZ 3.2 (Opie 0.9.3)  Both the pinyin_input and Effy_Chinese-3.1 packages crash when I try to use them and so I have to reboot to get the Z back up.

Anyone able to input pinyin on Open Zaurus or have any ideas whats going wrong.

Craig.

Title: Chinese input
Post by: chyang on July 30, 2004, 04:42:46 am

try this one:
http://www.hi-pda.com/forum/viewthread.php...RG4E#pid1883846 (http://www.hi-pda.com/forum/viewthread.php?tid=191027&pid=1883846&page=5&sid=orRG4E#pid1883846)
I suspect you need to download the source and recompile it.

Title: Chinese input
Post by: craigtyson on July 30, 2004, 07:17:27 pm

tried the link but got an 未定义操作，请返回 "operation not defined please return" error.

Title: Chinese input
Post by: murphytalk on July 31, 2004, 12:53:39 am

http://www.hi-pda.com/forum/viewthread.php...=191027&fpage=1 (http://www.hi-pda.com/forum/viewthread.php?tid=191027&fpage=1)

Title: Chinese input
Post by: xiaman on August 05, 2004, 09:50:48 pm

you have to register to be able to download.

Title: Chinese input
Post by: chyang on September 21, 2004, 10:08:46 pm

in fact, I have uploaded to the download section here.
You can also visit sourceforge for download.
https://sourceforge.net/projects/murphypinyin/ (https://sourceforge.net/projects/murphypinyin/)

Title: Chinese input
Post by: badog on December 12, 2004, 09:31:15 am

蛮亲切的感觉

Title: Chinese input
Post by: panyo on December 13, 2004, 04:46:03 am

I installed the ipk from sourceforge and did ipkg-link add, even re-booted,
but I do not see the input method. Anything else I need to do?

Title: Chinese input
Post by: craigtyson on December 15, 2004, 05:18:18 pm

it doesnt seem to work with opie.  iv had to go back to the tkc rom

Title: Chinese input
Post by: craigtyson on December 15, 2004, 05:18:38 pm

it doesnt seem to work with opie.  iv had to go back to the tkc rom

Title: Chinese input
Post by: xjqian on December 24, 2004, 04:36:27 am

installed and launched successfully. but not in working condition. i think it's the 320x480 vs 640x480 resolution issue.

update: I got it working in my 6K. You have to make sure the font in the conf file matches your chinese font.

since I renamed my efont to helvetica, and replaced the defualt helvetica; I have to edit the following file

/home/etc/murphytalk.conf
font=helvetica        (by default it's efont)

reboot

now everything works perfectly. Thanks chyang