OESF Portables Forum
Everything Else => General Support and Discussion => Zaurus General Forums => Archived Forums => Accessories => Topic started by: zaphod on December 17, 2003, 12:55:18 am
-
The list at the sharp website seems to say that most CF modems will not work with the Zaurus. I\'m looking for a simple (landline) CF modem for my C750. Can anyone recommend a model that is easily available?
-
Targus CF modem. It has worked on my 5500 in all the Sharp and OZ roms, and works in my c760 as well.
-
socket cf modem worked just after unpacking and inserting on my c750.
-
I have been using a Socket Communication landline CF modem on my 5000D.
Works smoothly and no hitches at all.
-
Which model# are you guys using? I bought a Targus PA560 and when I stick it in my C750 nothing happens. People say that the Targus PA560U will work, but I couldn\'t find it and I decided to take a chance.
-
I\'ve gotta ambicom modem...works great
-
omin0us: Which targus CF modem do you have? Does it say \"Model # PA560?
-
I\'ve gotta ambicom modem...works great
Guest, which ambicom mobem? I have CF56M-EZ and I cannot get it
to respond to minicom (what serial port should I be talking to? Tried ttyS1, ttyS2)
and the \'on\' light does not come on.
I have been trying to dial in to it and have getty give me a login propmt, but
now I am starting to wonder if my problem is perhaps with the card.
edit
I did not try ttyS3- now that I have, it works on my SL5500.
-
I use the Ambicom CF56M-EZ and it works fine with my C860. I connect via the Network applet (created a new PPP Dial up config, left the init string at the default).
-
I picked up a Hawking Technology 56K modem on a clearance counter at Microcenter and it worked perfectly right out of the box.
~ray
-
Found a CF modem at Radio Shack on clearance for $19.99, worked out of the box on my SL-5500.
Card says: 56K Compact Flash Modem Radio Shack 25-928. On the back says MODEL: FB CFVFM-5614RD and below that \"Pretec\"
-
My TrendNet TFM-CF56 works just fine (after editing the config file) on my SL-5500. Most CF modems are based on the same chip set, so they should nearly all work with the Z, as long as they are not \"WinModems\".
-
I got the Ipaq CF modem \"Compaq 56k P/N 148909-B21\" from ebay and it works perfectly (in the UK) out of the box on my C760+5500.
Good luck
-
I\'ve gotta ambicom modem...works great
Guest, which ambicom mobem? I have CF56M-EZ and I cannot get it
to respond to minicom (what serial port should I be talking to? Tried ttyS1, ttyS2)
and the \'on\' light does not come on.
I have been trying to dial in to it and have getty give me a login propmt, but
now I am starting to wonder if my problem is perhaps with the card.
edit
I did not try ttyS3- now that I have, it works on my SL5500.
I have that same modem and I can\'t get it to work with my 5600.
Although I think I tried to use ttyS3. I can\'t get minicom to work with it either (this is the first time i\'ve ever played with minicom)
What steps did you take to get it to work?
-
The targus modem appears to be a rebadging of this Billionton (Taiwan) modem:
http://www.billionton.com.tw/website/index.html (http://www.billionton.com.tw/website/index.html)
Billionton also make an ethernet CF card that is reported to work well with the Zaurus.
Ami
-
Not got one myself, but recently lent a C750 to Foxpop for review. They had a couple of CF Modems knocking around that they tried out and worked ok. Pretec and Xircom.
See http://www.foxpop.co.uk/Sharp/zaurus_cover.htm (http://www.foxpop.co.uk/Sharp/zaurus_cover.htm) (You want connectivity page).
-
I\'ve gotta ambicom modem...works great
Guest, which ambicom mobem? I have CF56M-EZ and I cannot get it
to respond to minicom (what serial port should I be talking to? Tried ttyS1, ttyS2)
and the \'on\' light does not come on.
I have been trying to dial in to it and have getty give me a login propmt, but
now I am starting to wonder if my problem is perhaps with the card.
edit
I did not try ttyS3- now that I have, it works on my SL5500.
I have that same modem and I can\'t get it to work with my 5600.
Although I think I tried to use ttyS3. I can\'t get minicom to work with it either (this is the first time i\'ve ever played with minicom)
What steps did you take to get it to work?
In minicom I pressed Control-A Z to get the setup menu. Then I selected o, and then serial port setup from the menu. I then selected A and typed either /dev/ttyS3 or just ttyS3.
I have it dialing and making connections, but I have not succeeded in doing file transfers.
Trying to use z-modem with a Mac. Might try ppp soon, but havo only done direct computer to computer connections so far, manualy issuing ata and atd.
-
Sigh I can\'t figure out how to actually dial on mine ....
Those of you with the Socket modem what rom/model of the Zaurus are you using?
And what steps did you take to get it to work?
-
\'Figured it out -- wasn\'t much to it -- Socket CF modem works fine under Sharp Rom 3x
-
The Pretec CompactModem is excellent, works flawlessly just like any external serial modem with Linux.
I have tested it successfully with Zaurii SL-5000D, SL-5500 and SL-6000L and with many different roms, sharp, tkc, hybrid, oz.
I managed to send and receive faxes with it, too :wink:
-
Been using/selling the Pretec one for a while now and it works a treat with the C7/8xx models and standard roms.
-
Who has a Targus PA560 working (if anyone) and what are the init commands? I ordered a new, sealed PA560U (that\'s what it said on the packaging, anyway), but the modem inside turned out to be a PA560. Thanks.