OESF Portables Forum
Everything Else => Zaurus Distro Support and Discussion => Distros, Development, and Model Specific Forums => Archived Forums => Angstrom & OpenZaurus => Topic started by: Pyrates on September 30, 2004, 03:21:34 pm
-
Hi there!
When I try to start nano, I get the error message from above. What should I set TERM to in order to use nano? Thanks for any pointers...
Cheers
Philipp
-
I think you might need to install libncurses (the ncurses package). You'll then need to symlink libncurses.so.5 to libncurses.so.4
Si
-
Si
I think you might need to install libncurses (the ncurses package). You'll then need to symlink libncurses.so.5 to libncurses.so.4
ncurses installs automatically, symlinking libncurses.so.5 to libncurses.so.4 still gives:
Error opening terminal: xterm.
I'd have thought that if ncurses was missing nano would have failed with a linker error, not that particular one -- maybe there is something wrong with the one of the terminal info type packages.
-
You also need to install ncurses-terminfo. This fixed it for me. It should be added to someone's dependency chain somewhere ...
Mike
-
Dang, none of those did help Well, I mean, thanks anyway, your help is appreciated. Any other ideas?
Cheers
Philipp
-
Hmm, I've just started playing with OZ 3.5.1, so I don't think I've installed too many things to confuse the issue. I installed ncurses, ncurses-terminfo, and nano. Possibly relevant environment variables in the opie-terminal are:
CONSOLE=/dev/console
TERM=vt100
Did you run ipkg-link add ... after you installed each of the packages? Did you run ldconfig?
Sorry if you've already done all of this, but these are some of the things I've done along the way to get everything happy.
Good luck.
Mike
-
Hmm, yeah, you guessed well. I didn't run ldconfig, I think that's what the package installation should do... anyway, of course I tried, but still, no go. I did run ipkg-link add though... I also changed the TERM variable, but nothing works... HELP! Thanks, mike_r.
Cheers
Philipp
-
I've made a script to install nano on a OZ 3.5.1 system here: http://linux.cs.id.ucsb.edu/~ryanr/scripts/install_nano.sh (http://linux.cs.id.ucsb.edu/~ryanr/scripts/install_nano.sh)
Will install ncurses and ncurses-terminfo if needed. Requires a net connection for wgets.
-
Thanks for that script
Didn't work out, though Maybe you're able to help me? I've uninstalled nano, ncurses-terminfo and ncurses (and ipkg-link removed them) before, and edited the script to fit my needs (destination ram and fdest /mnt/ram). Here's the output:
ncurses ...
ncurses_5.4-r0_arm.i 100% |*****************************| 327 KB 00:00 ETA
Connecting to openzaurus.org[66.35.250.210]:80
ipkg: *** Couldnt kill old gunzip process *** aborting
*** Command: add
*** Locating package
Package "ncurses" not found.
SCRIPT: Fixing broken symlinks ...
ncurses-terminfo_5.4 100% |*****************************| 336 KB 00:00 ETA
Connecting to openzaurus.org[66.35.250.210]:80
ipkg: *** Couldnt kill old gunzip process *** aborting
SCRIPT: ipkg-link of ncurses-terminfo ... this could take a while ...
*** Command: add
*** Locating package
Package "ncurses-terminfo" not found.
SCRIPT: ncurses installation failed
SCRIPT: Installing nano ...
nano_1.3.0-r0_arm.ip 100% |*****************************| 50624 00:00 ETA
Connecting to openzaurus.org[66.35.250.210]:80
Installing nano (1.3.0-r0) to ram...
Installing nano (1.3.0-r0) to ram...
nano: unsatisfied recommendation for nano-locale
Installing ncurses (5.4-r0) to ram...
Downloading http://openzaurus.org/official/unstable/3...._5.4-r0_arm.ipk (http://openzaurus.org/official/unstable/3.5.1/feed/ncurses_5.4-r0_arm.ipk)
Configuring nano
Configuring ncurses
Successfully done.
*** Command: add
*** Locating package
*** Found package on /mnt/ram
*** Adding nano
*** Done.
SCRIPT: nano installed.
Nano is installed indeed, I still have the same error message though... Thanks for any help!
Cheers
Philipp