OESF Portables Forum

Model Specific Forums => Sharp Zaurus => Zaurus - pdaXrom => Topic started by: InSearchOf on May 05, 2006, 07:51:05 pm

Title: 2gig And Up Sd Support
Post by: InSearchOf on May 05, 2006, 07:51:05 pm

I havent heard much hype about the 2gig support in the 3200 sharp rom in a while.
With the discovery by Cresho (I believe) he implemented the driver into OZ. I didnt know if anyone looked into porting that driver or module over to the pdaXrom platform...
I dont believe this has already been solved or if the plan was to wait till we leap into the 2.6 kernel enviroment and the support is already there or if someone is secretly coding and not giving up the goods...

If I start a mockary sorry... but this 1giger is starting to become a hastle having to remove data to put copy a movie or larger data file over semi-permanant use.

I'm going to look in to finding another SD module that might work with arm platform.

Title: 2gig And Up Sd Support
Post by: Meanie on May 05, 2006, 08:11:56 pm

Quote

I havent heard much hype about the 2gig support in the 3200 sharp rom in a while.
With the discovery by Cresho (I believe) he implemented the driver into OZ. I didnt know if anyone looked into porting that driver or module over to the pdaXrom platform...
I dont believe this has already been solved or if the plan was to wait till we leap into the 2.6 kernel enviroment and the support is already there or if someone is secretly coding and not giving up the goods...

If I start a mockary sorry... but this 1giger is starting to become a hastle having to remove data to put copy a movie or larger data file over semi-permanant use.

I'm going to look in to finding another SD module that might work with arm platform.
[div align=\"right\"][a href=\"index.php?act=findpost&pid=125902\"][{POST_SNAPBACK}][/a][/div]

he did not put it into oz, they wrote their own.
you can just replace the sd module with the newer one from the c3200 if you are running beta1 and have a Cxx00, ie c1000, c3000, c3100
beta 2 onwards uses a different module which you would need to disable/remove first before reinstating the old sdmgr which loads the module.
please get your facts right to avoid confusion and yet another unneeded flame war. you can only port if you have the source code. the sd driver from the c3200 is binary only but the kernel is binary compatible with sharp kernel, ie compiled with hardfloat and same kernel version as well

Title: 2gig And Up Sd Support
Post by: InSearchOf on May 05, 2006, 08:45:51 pm

Quote

please get your facts right to avoid confusion and yet another unneeded flame war.

Dude... You act like I thought a shot at someone... and purposly starting a flame war... This is why I usually refrain from posting...

Thanks for putting me in my place...

Title: 2gig And Up Sd Support
Post by: Meanie on May 05, 2006, 09:13:40 pm

Quote

Quote

please get your facts right to avoid confusion and yet another unneeded flame war.

Dude... You act like I thought a shot at someone... and purposly starting a flame war... This is why I usually refrain from posting...

Thanks for putting me in my place...
[div align=\"right\"][a href=\"index.php?act=findpost&pid=125909\"][{POST_SNAPBACK}][/a][/div]

sorry dude. it wasn't my intention to "put you in place" i am sorry if it came across like that  i'll go to bed now

Title: 2gig And Up Sd Support
Post by: Cresho on May 05, 2006, 09:27:57 pm

Quote

Quote

Quote

please get your facts right to avoid confusion and yet another unneeded flame war.

Dude... You act like I thought a shot at someone... and purposly starting a flame war... This is why I usually refrain from posting...

Thanks for putting me in my place...
[div align=\"right\"][a href=\"index.php?act=findpost&pid=125909\"][{POST_SNAPBACK}][/a][/div]

sorry dude. it wasn't my intention to "put you in place" i am sorry if it came across like that  i'll go to bed now
[div align=\"right\"][a href=\"index.php?act=findpost&pid=125912\"][{POST_SNAPBACK}][/a][/div]

Title: 2gig And Up Sd Support
Post by: emip on May 08, 2006, 07:30:33 am

Does anybody know of the status of SDIO in this or future kernels for the Z?

Title: 2gig And Up Sd Support
Post by: coreilly on May 09, 2006, 05:50:10 pm

got a 2gig sd card waiting right here... support in pdaxrom soon?

Title: 2gig And Up Sd Support
Post by: km2783 on May 09, 2006, 06:19:21 pm

using beta1, I installed the ipk from that other thread, rebooted, but when i removed my old 512MB card and inserted the 4GB card under X, the system froze.  but a battery pull later, it recognizes the card

Title: 2gig And Up Sd Support
Post by: Cresho on May 09, 2006, 08:08:09 pm

the pdaxrom has it's own drivers to work with it.  are you sure its not running off the the pdaxrom?  Both are totally diffrent.  my 4gb sure didnt work but i never tried using the driver i slapted together on pdaxrom.

Title: 2gig And Up Sd Support
Post by: Meanie on May 09, 2006, 09:25:24 pm

Quote

the pdaxrom has it's own drivers to work with it.  are you sure its not running off the the pdaxrom?  Both are totally diffrent.  my 4gb sure didnt work but i never tried using the driver i slapted together on pdaxrom.
[div align=\"right\"][a href=\"index.php?act=findpost&pid=126333\"][{POST_SNAPBACK}][/a][/div]

he is using beta1, so it will and does work for him. beta2 and beta3 will need a bit of hacking to get it to work

Title: 2gig And Up Sd Support
Post by: Cresho on May 10, 2006, 12:17:33 am

ahh, thanks for clearing it up.  the beta 3 did not work for my 4gb.

Title: 2gig And Up Sd Support
Post by: donquixote on May 14, 2006, 11:24:54 pm

Quote

using beta1, I installed the ipk from that other thread, rebooted, but when i removed my old 512MB card and inserted the 4GB card under X, the system froze.  but a battery pull later, it recognizes the card
[div align=\"right\"][a href=\"index.php?act=findpost&pid=126325\"][{POST_SNAPBACK}][/a][/div]

Can you post a link to "that other thread"? I'm having trouble getting my 2gig card to be recognized. Thanks.

dq

Title: 2gig And Up Sd Support
Post by: Jon_J on May 14, 2006, 11:53:13 pm

Quote

Quote

using beta1, I installed the ipk from that other thread, rebooted, but when i removed my old 512MB card and inserted the 4GB card under X, the system froze.  but a battery pull later, it recognizes the card
[div align=\"right\"][{POST_SNAPBACK}][/a][/div] (http://index.php?act=findpost&pid=126325\")

Can you post a link to "that other thread"? I'm having trouble getting my 2gig card to be recognized. Thanks.

dq
[div align=\"right\"][a href=\"index.php?act=findpost&pid=127052\"][{POST_SNAPBACK}][/a][/div]

I hope this is what your'e looking for.
"2gb And Up Sd Cards Supported, driver available for cxxxx"
[a href=\"https://www.oesf.org/forums/index.php?showtopic=18523]https://www.oesf.org/forums/index.php?showtopic=18523[/url]

Title: 2gig And Up Sd Support
Post by: donquixote on May 15, 2006, 10:22:28 pm

Dang! Thanks for the link, but I guess this one does not work for my model.

Does anyone know if one can get a 2gig sd card working for the c760?

Thanks.

dq

Title: 2gig And Up Sd Support
Post by: wrc4 on May 21, 2006, 03:22:34 am

Quote

Dang! Thanks for the link, but I guess this one does not work for my model.

Does anyone know if one can get a 2gig sd card working for the c760?

Thanks.

dq
[div align=\"right\"][a href=\"index.php?act=findpost&pid=127210\"][{POST_SNAPBACK}][/a][/div]

Same for me. I have a SANDisk 2G SD and would like it to work on my SL7500C (C750). With pdaXrom1.1.0beta1 the system hung for a while after the card wad inserted but didn't recognize the card(The CPU usage was rising and falling, though).

Title: 2gig And Up Sd Support
Post by: adf on May 21, 2006, 03:52:23 am

check tetsu's page?

Title: 2gig And Up Sd Support
Post by: DaemonsGR on May 21, 2006, 08:23:43 am

Anyone tried a 4g SD (Ill get one from newegg) on pdaxrom beta4?

THnx

Title: 2gig And Up Sd Support
Post by: Dima202 on May 22, 2006, 03:13:25 pm

Quote

Quote

Dang! Thanks for the link, but I guess this one does not work for my model.

Does anyone know if one can get a 2gig sd card working for the c760?

Thanks.

dq
[div align=\"right\"][{POST_SNAPBACK}][/a][/div] (http://index.php?act=findpost&pid=127210\")

Same for me. I have a SANDisk 2G SD and would like it to work on my SL7500C (C750). With pdaXrom1.1.0beta1 the system hung for a while after the card wad inserted but didn't recognize the card(The CPU usage was rising and falling, though).
[div align=\"right\"][a href=\"index.php?act=findpost&pid=127938\"][{POST_SNAPBACK}][/a][/div]

Yeah, I just found a great deal for 4GIG SD on newegg:
[a href=\"http://www.newegg.com/Product/CustratingReview.asp?item=N82E16820220146]http://www.newegg.com/Product/CustratingRe...N82E16820220146[/url]
I hope this will work with my C860 soon  /me keeping fingers crossed

Title: 2gig And Up Sd Support
Post by: Dima202 on May 25, 2006, 04:08:42 pm

Just got the 4gig from NewEgg. Really looking for forward to support of 2gig and up  

Thanks

Title: 2gig And Up Sd Support
Post by: Dima202 on June 02, 2006, 05:37:30 pm

Quote

Just got the 4gig from NewEgg. Really looking for forward to support of 2gig and up  

Thanks
[div align=\"right\"][a href=\"index.php?act=findpost&pid=128427\"][{POST_SNAPBACK}][/a][/div]

Really don't want this thread to die since it would mean so much to me and I think many others. Any progress, projects going on for this?

Title: 2gig And Up Sd Support
Post by: adf on June 02, 2006, 05:40:15 pm

been asking the same thing

Title: 2gig And Up Sd Support
Post by: adf on June 03, 2006, 04:56:04 pm

My 4 gig works in Beta 4 !

Title: 2gig And Up Sd Support
Post by: DaemonsGR on June 04, 2006, 08:45:57 am

Quote

My 4 gig works in Beta 4 !
[div align=\"right\"][a href=\"index.php?act=findpost&pid=129649\"][{POST_SNAPBACK}][/a][/div]

Thnx!