OESF Portables Forum
Model Specific Forums => Sharp Zaurus => Zaurus - pdaXrom => Topic started by: LukeLuke on August 17, 2006, 11:23:45 am
-
I have installed the pdaxrom beta 3 ..... graphically is beautiful, but i have some problem:
1. When Z startup the lines on the screen has not displaied, like my linux PC do, but the new line overwrite the previous line. if i lunch a dmesg, i see only the last line, not all lines.
2. When i close X, the Z freeze...i not have a prompt.
3. My WIFI card not work, when i insert it , the applet(CF/SD Monitor) see it like: ZCOMAX X!-325H 200mW
CARDCTL IDENT
Socket 0:
product info: " ", "IEEE 802.11 Wireless LAN/CF Card", ""
manfid: 0xd601, 0x0005
function: 6 (network)
Socket 1:
no product info available
CARDCTL INFO
Socket 0:
product info: " ", "IEEE 802.11 Wireless LAN/CF Card", ""
manfid: 0xd601, 0x0005
function: 6 (network)
Socket 1:
no product info available
CARDCTL STATUS
Socket 0:
3.3V 16-bit PC Card
function 0: [ready]
Socket 1:
no card
IWCONFIG
lo no see wireless extensions.
4. When i run System Tools --> CPU Config it's not run.
THANKS A LOT!!!
Bye
-
if i try to reinstall hostap-driver , the ipkg say:
depmod: *** Unresolved symbols in /lib/modules/2.4.20/net/hostap.o
what can i do?
THANKS
Bye
-
if i try to reinstall hostap-driver , the ipkg say:
depmod: *** Unresolved symbols in /lib/modules/2.4.20/net/hostap.o
what can i do?
THANKS
Bye
[div align=\"right\"][a href=\"index.php?act=findpost&pid=138938\"][{POST_SNAPBACK}][/a][/div]
Your pdaXrom is corrupted.... try a full reinstall
-
i retry last night and nothing....the same error! what can i do ?
-
i retry last night and nothing....the same error! what can i do ?
[div align=\"right\"][a href=\"index.php?act=findpost&pid=138975\"][{POST_SNAPBACK}][/a][/div]
you DID download a new image, right?
-
i have downloaded the new image now! the md5 is right, i unzip with ark and copy to SD trought the scp , the dimensions of the file is the same!
I try to reflash......but NOTHING!!!!! THE SAME ERROR :-(
What can i do ? The file on the mirror is corrupted ?
THANKS
Bye
-
i have downloaded the new image now! the md5 is right, i unzip with ark and copy to SD trought the scp , the dimensions of the file is the same!
I try to reflash......but NOTHING!!!!! THE SAME ERROR :-(
What can i do ? The file on the mirror is corrupted ?
THANKS
Bye
[div align=\"right\"][{POST_SNAPBACK}][/a][/div] (http://index.php?act=findpost&pid=138981\")
Maybe.
Or your SD card from which you flash has a problem.
Did you try another SD or CF card?
When I flashed, I downloaded from here:
[a href=\"http://mail.pdaxrom.org/download/1.1.0beta3/Zaurus-Cxx00/]http://mail.pdaxrom.org/download/1.1.0beta3/Zaurus-Cxx00/[/url]
This worked well.
daniel
-
The mirror is equal.
I'll try to reflash trought the CF .....
bye
-
ok! i have reflashed with a sandisk CF .... it's equal!
What can i do ? :-(
THANKS
Bye
-
i try to flash with beta1....equal!
What do i wrong?
1.I enter in the flash menu, chose SD or CF, when it restart i resize partition in 121M
2. Install ROM
3. Reboot and eject all card.
4. push on button!
What can i do ?
THANKS
Bye
-
i think that the problem was an incorrect flash process, the probabily cause is the mmc, but i had se same problem with a kingstom SD.
I try the beta4 but i cannot install the u-boot, error on the SD, so i try to repartitionize my card like fat and reformat like fat16....and now i was tryng the beta4 and it's work!
THANKS
Bye