OESF Portables Forum
Everything Else => Europe User Groups => Zaurus Regional User Groups => Everything Else => Archived Forums => Poland => Topic started by: sharpman on July 20, 2008, 10:56:18 am
-
Witam. Ostatnio sformatowalem sobie zaurusa co przynioslo mi wiele problemow z dyskiem. mialem duzy problem z bledem hdd1 error ale poradzilem sobie. teraz wyswietla mi sie blad HDD not initialized trzeba cos zrobic z plikami ktore sa w owej paczce http://www.trisoft.de/download/SLC3200SYSPART.zip (http://www.trisoft.de/download/SLC3200SYSPART.zip)
partycje sa ustawione tak jak w tabeli. nie rozumiem tylko ostatniej czesci txt wiec jak ktos moglby mi pomoc
oto pliczek:
Contents of the system-partitions for the SL-C3200
TRIsoft / Marc Stephan / April 11th, 2006
Use the information in this document at your own risk.
TRIsoft is not liable for any damages that may result from
these informations.
SL-C3200 HDD-Partition table:
/dev/hda1 Start 1 End 20 Blocks 10048+ id 83 System Linux
/dev/hda2 Start 21 End 40 Blocks 10080 id 83 System Linux
/dev/hda3 Start 41 End 11905 Blocks 5979960 id c System Win95 FAT32 (LBA)
Note:
While using the fdisk on the Zaurus, double check that you set the
correct parameters for the drive. They have to be:
16 heads / 63 sectors/track / 11905 cylinders
Format the partitions with:
mke2fs -j /dev/hda1
mke2fs -j /dev/hda2
mkfs.vfat -F 32 /dev/hda3
/hda1 and /hda2 are 9.5 MB partitions. Each one contains a ".sys" and
a "lost+found" directory. The contents of the .sys-directories are
in this file.
Files in /hdd1/.sys :
hdimage2.tgz (2149 Bytes, contains japanese web-bookmarks - hurray !)
hdlist1.dat (85 Bytes, no clue what it's good for)
Files in /hdd2/.sys :
contlist.dat (74327 Bytes)
hdlist2.dat (1264 Bytes)
hdlist3.dat (1519 Bytes)
The Zaurus will display an error like "HDD not initialized" if the
directories and files are missing. Just restoring the partition table
won't make an SL-C3200 happy.